Solucion Flasheo De Lg P506go, unlock y flasheo Opciones

[jomboy]

aqui les va un pequeño aporte que les servira de mucho ... e leido que a muchos se les a muerto en proceso de flasheo esto es sencillo solo deben meter la flash especial que esta en el soporte instalar los driver y dejar quela pc reconosca el equipo al conertarlo al puerto seleccionar el equipo correcto y lo mas importante al seleccionarel flash no olviden marcar la opcion ERASE EFS QUE ESTA EN LA PESTAÑA DE FLASHEO DE LA VYGIS ... ami me sirvio de mucho ya que el cel se me quedaba en modo emergencia por q no completava el flasheo

[Anunciante Autorizado]

[lupitareyes]

amigo yo tengo un lg p509 t-mobile para unlock pero al conectarlo con pila o sin pila en que modo?.me lo detecta pero al dar flasheo me tira un mensaje como de error, y no prosigue me tira operacion failed.

me pudieras orientar la forma de conectarlo si es encendio apagado modo normal o modo emergencia?
si me pudieras guiar con mas informacion. gracias

[JACKgmv]

amigo yo tengo un lg p509 t-mobile para unlock pero al conectarlo con pila o sin pila en que modo?.me lo detecta pero al dar flasheo me tira un mensaje como de error, y no prosigue me tira operacion failed.

me pudieras orientar la forma de conectarlo si es encendio apagado modo normal o modo emergencia?
si me pudieras guiar con mas informacion. gracias

If flashing was not finished correctly do next :
- press "Disconnect PORT" at software
- disconnect phone from cable
- put off-put on baterry,power ON phone,connect cable and try connect
with software again
- if phone blinks or can't be connected in normal way-disconnect if from
software and cable,put off-put on baterry,press 2,5 and power ON buttons together
on phone's keyboard-phone must enter to "EMERGENCY" mode - some phones need another
combinations - they are described below.
- connect phone to cable,connect with software and write flash file
- after flash writing go to "Unlocker" section and press "Write NVM" for
phone's NVM backup writing.
- if phone's NVM backup was not created-use "Repair NVM" option
---------------------------------------------------
esta en la ayuda del software de vigys

--------------------------------------------------

para otros modelos:

ENTERING TO EMERGENCY MODE COMBINATIONS :
- for CU915,TU915,CU920 - press "Volume down"+"Lock"+"Camera"+"Power ON"- on the screen
must appear "Emergency Download"
- for KS20 - look to picture "KS20 emergency mode.jpg"
- for KE990,KU990 - press "Send"+"C"+"Camera"+"Power ON"-on the screen
must appear "Emergency Download"
- for KC910 - press "Send"+"Menu"+"Camera"+"Power ON"-on the screen
must appear "Emergency Download"
- for CT810,CT815,GT810 and GM750 - press "Volume down"+"Lock"+"Power ON"- on the screen
must appear "Emergency Download"
- for GM730 - press "Volume down"+"Volume up"+"Power ON"- on the screen
must appear "Emergency Download"
- for GU280,GU285,BL20 and BL42 - press "2"+"5" and connect USB cable to phone
- for all others - press "2","5" and "PowerON" together
- for BL40 - press and keep pressed "Volume up" + "Volume down" + "Lock" buttons
and connect USB cable to phone, on LCD must appear "Emergency mode"
- for GW620 - press "1" and connect USB cable to phone, on LCD must appear "Emergency mode"
- for GW820 and GW825 - press "Space" at QWERTY keypad and connect USB cable to phone, on LCD must
appear "Emergency mode"
- for GT950 - press and keep pressed "Volume down" + "Multitask" buttons and connect USB cable to phone,
on LCD must appear "Emergency mode"
- for GD880 - press and keep pressed "Volume up" + "Volume down" and connect USB cable to phone,
on LCD must appear "Emergency mode"
- for GT540 - press and keep pressed "Volume down" and connect USB cable to phone,
on LCD must appear "Emergency mode"
- for GR700,GS505 - press and keep pressed "Volume down"+"Volume up"+"Multitask" and connect USB cable
to phone, on LCD must appear "Emergency download"
- for P500,P500h,P503,P505,P506,P509 - press and keep pressed "Volume up"+"Return" and connect USB cable to phone,
on LCD must appear "Emergency mode"
- for E720 - press and keep pressed "Volume down"+"Volume up" and connect USB cable to phone,
on LCD must appear "Emergency Mode"
- for LGC320 and LGC320i - press "2"+"5" and connect USB cable to phone
- for LG-E900 - press and keep pressed "Volume down"+"Camera" and connect USB cable to phone,
on LCD must appear "Emergency Download"
- for LG-C900 - press "Space" at QWERTY keypad and connect USB cable to phone, on LCD must
appear "Emergency Download"
- for C710 and C710h - press "1" and connect USB cable to phone, on LCD must appear "Emergency mode"
- for P350 and P350GO - press and keep pressed "Volume down"+"Volume up" and connect USB cable to phone,
on LCD must appear "Emergency Mode"
- for C550 - press "1" and connect USB cable to phone, on LCD must appear "Emergency mode"

ENTERING TO EMERGENCY MODE COMBINATIONS FOR LG CYON :
- for phones with keyboard - connect USB cable to phone first (this is important),later press "2","5"
and "PowerON" together.LCD must be black-phone doesn't have emergency mode indication.
- for SH210,KH2100 - connect USB cable to phone first (this is important), later press
"Send"+"C"+"Lock"+"Power ON".LCD must be black-phone doesn't have emergency mode indication.
- for SU910 and KU9100 - connect USB cable to phone first (this is important),later press
"Call"+"C"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU630 and KU6300 - connect USB cable to phone first (this is important),later press
"Volume up"+"Volume down"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU900 and KU9000 - connect USB cable to phone first (this is important),later press
"Volume down"+"Multitask"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU210 and KU2100 - connect USB cable to phone first (this is important),later press
"Volume up" and keep it pressed till on LCD will appear "Emergency download".
- for SU420 and KU4200 - connect USB cable to phone first (this is important),later press
"Volume up"+"Volume down"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU920 and KU9200 - connect USB cable to phone first (this is important),later press
"CALL"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU950 and KU9500 - press and keep pressed "Home"+"Add menu" and connect USB cable to phone,
on LCD must appear "SW Download" in Korean language."Add menu" is button at left of "Home".
- for SU960 and KU9600 - connect USB cable to phone first (this is important),later press
"Volume up"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.
- for SU100, SU130, KU9300 - connect USB cable to phone first (this is important),later press
"CALL"+"PowerON".LCD must be black-phone doesn't have emergency mode indication.

ENTERING TO EMERGENCY MODE COMBINATIONS FOR LG FOMA :
- for L04C - press and keep pressed "Volume up" + "Volume down" and connect USB cable to phone,
on LCD must appear "Updating"

Mensaje modificado por JACKgmv el Sep 20 2011, 07:38 PM

[javier5891]

hola sabes como activarlo y aser ke funcione el mismo pero con la caja octopus???? te agradeceria mucho tu ayuda

[RoqueUnlockeR]

aqui les va un pequeño aporte que les servira de mucho ... e leido que a muchos se les a muerto en proceso de flasheo esto es sencillo solo deben meter la flash especial que esta en el soporte instalar los driver y dejar quela pc reconosca el equipo al conertarlo al puerto seleccionar el equipo correcto y lo mas importante al seleccionarel flash no olviden marcar la opcion ERASE EFS QUE ESTA EN LA PESTAÑA DE FLASHEO DE LA VYGIS ... ami me sirvio de mucho ya que el cel se me quedaba en modo emergencia por q no completava el flasheo

parcero si tan solo dijieras cual flash especial hablas creo que ayudarias en muchoo

te agradesco amigoo

[billabaclio]

no me reconoce el puerto,.ok lo reconoce no puedo seleccionarlo me dce que no se encontro el Puerto

[jorge184]

no me reconoce el puerto,.ok lo reconoce no puedo seleccionarlo me dce que no se encontro el Puerto

alguna solucion para este problema del puerto tengo uno igual