Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado Opciones

[Eliminado_clark_*]

para que lo entiendan mejor


Actualización 05/20/2012
Firmware v02.02 Lanzamiento de cajas Classic and Reloaded! Sólo actualizar su caja utilizando Asistente para cuadros.
PRIMERO EN EL MUNDO BLACKBERRY MEP-11534-010 Desbloquee añadido!
Apoyo a MEP-09292-008 Fijo!
Sólo tiene que utilizar "Asistente de Caja" para actualizar su Firwmare caja! Permanezca en sintonía

[Anunciante Autorizado]

[elbbel]

[mauro1988]

nueva actualizacion n9

Mensaje modificado por mauro1988 el May 30 2012, 01:46 PM

Fichero(s) Adjunto(s)

 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 174.97k ) Número de descargas: 0
 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 80.36k ) Número de descargas: 0

 

[Franklin505]

Cyclone HOT Update, Nokia N9 World's First SECURITY FUNCTIONS ADDED!!

Hi to all,

- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes

Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.

Few tests, Security Code Read w/o data loss:

[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00

SX4 Authorization (Make sure FORCE SX4 SERVER iss TICKED)

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer © Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server

And just basic read info...

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer © Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, © NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one

Mensaje modificado por franklin505 el May 30 2012, 02:04 PM

[miguelcpm22]

Hi, new firmware for Cyclone Box is ready.

What's new?
- Added support for Blackberry MEP-14896-006 - FIRST IN THE UNIVERSE

Just update your box using "Box Wizard"

[thebest1989]

Firmware v02.04 Released.

Added support for Blackberry MEP-27501-001
Added support for Blackberry MEP-09292-007

Just use Box Wizard to update your box

Stay tuned,
More to come,
Cyclone Box Team

[3zr3vnoc]

FREE Cycator Released for Cyclone Box Users

Hello,

What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.

Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.

How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:

N6501 4605987 ACCELEROMETER 3-AXIS 2.5V LGA14
N7520 4355951 PW AMP GSM/EDGE850/900/1800/1900
N7540 4355898 PW AMP WCDMA 824-915/1710-1980MHz
N7541 4346537 DC/DC CONV for WCDMA PAs WLCSP8
N7590 4348579 DC/DC CONV FOR RFIC WLCSP8
R1400 1430770 CHIPRES 0W06 4K7 J 0402
R1401 1430726 CHIPRES 0W06 100R J 0402

and so on... and selected component will be shown on phone PCB.

second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.

Another option is just to point a component by mouse and on bottom-left you will see an exact component name

How it looks?

 Cycator.... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 102.34k ) Número de descargas: 0


If the users will be happy, we will be constantly updating Cycator database.

Mensaje modificado por rey00 el Jun 11 2012, 02:12 PM

[cellcentersps]

FREE Cycator Released for Cyclone Box Users

Hello,

What is Cycator?
This is software intended exclusivly for Cyclone Box Users which are also HW repair engineers.

Where from download?
Use Germany Server, it's in 'Cycator' Directory. Use WinRar for unpacking.

How to work with Cycator?
1. Launch Cycator SW.
2. Select Product (we will post list tomorrow, for example Tube is 5800Xm, Picollo is 6300, Picollino is 5130xm, etc). Current revision (11062012) support 69 products and PCB versions.
3. Now you can either select component from list:
and so on... and selected component will be shown on phone PCB.

second option is to write in combobox needed component number (i.e. R1400), or just Nokia Part Number.

Another option is just to point a component by mouse and on bottom-left you will see an exact component name

How it looks?



If the users will be happy, we will be constantly updating Cycator database.

Fichero(s) Adjunto(s)

 Cycator_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 17.02mb ) Número de descargas: 64

 

[dapx]

Worlds First Nokia 808 Pure view Fully supported by CycloneBox


FLASH
READ/WRITE RPL
UNLOCK by LBF
All operations are fully supported by Cyclone Box

 nokia_80... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 40.1k ) Número de descargas: 1


 102lt.jp... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 38.52k ) Número de descargas: 0


 93323991... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 104.16k ) Número de descargas: 0

Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-807_112.020.0310_79u_prd.core.fpsx (CMT)...
Booting CMT...
[Nokia USB Phonet]: Port opened OK!
Switching to RAW Mode...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007400C192103032108
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 7E600000FFFB7C40A413E6385CF93EAFD753B702
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 3AB5DB70B45D23F1ADEEBB5734160706
CMT_BOOT_ROM_CRC: 2CAC45E2
CMT_SECURE_ROM_CRC: 3BC33C8B
CMT Ready!
RM-807_112.020.0310_79u_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
Searching for BootCode: DualLine 32Bit
RAPUv21_2nd.fg, Type: 2nd Boot Loader, Rev: 768.11.48.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
ROM Ret: 0xFFFD125D
ROM CMT dwAddr: 0x10004FF0
ROM CMT dwLength: 0x00627837
Seems ROM Initialized OK!
Transmission Mode Requested: Control USB, Accepted: Control USB
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0000000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC006000000032, Samsung, ONENAND
Requested Algorithm: XSR 1.6 (CMT)
Searching for BootCode: DualLine 32Bit
FlashChip 0x00EC0060 (Samsung), Size: 1024MBytes, VPP: Not Supported
RAPUv21_XSR17_alg.fg, Type: Algorithm, Rev: 768.11.48.0, Algo: XSR 1.6
Initializing TurboCache...
TurboCache Loaded!
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Transmission Mode Requested: Bulk USB, Accepted: Bulk USB
Box TX2 Data Pin set to: Service Pin 3
Waiting for FUR Client become avaiable...
[Nokia USB Flashing Generic]: Port opened OK!
FUR Avaiable!
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Overriding VPP Setting, USB can't use VPP
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x010C0000-0x170FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.419s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT SOS+DECOMP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS+IVE3A Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.39s
Flashing Speed: 47839.34 kBit/S
Processing RM-807_112.020.0310_79u_prd.core.fpsx (APE)...
Processing RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx (CMT)...
RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x0D1C0000-0x135BFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.390s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 7.191s
Flashing Speed: 56095.44 kBit/S
Processing RM-807_112.020.0310_20.01_Chinese_HK_79u_prd.rofs2.fpsx (APE)...
Processing RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx (CMT)...
RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x01678000-0x0169FFFF, ONENAND
EraseArea[0,CMT]: 0x135C0000-0x170FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.280s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Writing CMT SOS+IVE3B Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.546s
Flashing Speed: 1666.36 kBit/S
Processing RM-807_112.020.0310_214.01_default_79u.2012.17_prd.rofs3.fpsx (APE)...
Processing RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx (CMT)...
RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x17100000-0x3E5FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 2.387s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Programming Status OK!
All blocks written OK! Time taken 26.224s
Flashing Speed: 47858.86 kBit/S
Processing RM-807_112.020.0310_214.01_default_79u.2012.17.uda.fpsx (APE)...
Processing RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx (CMT)...
RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Started group flash erase
EraseArea[0,CMT]: 0x01678000-0x0169FFFF, ONENAND
EraseArea[0,CMT]: 0x135C0000-0x170FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.280s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT SOS+ROFS3 Certificate...
Writing CMT SOS+IVE3B Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.546s
Flashing Speed: 218.51 kBit/S
Processing RM-807_112.020.0309_C00.01_79u_prd.rofs3.fpsx (APE)...
Processing RM-807_112.020.0310_79u_prd.core.fpsx (CMT)...
RM-807_112.020.0310_79u_prd.core.fpsx, Type: Flash Image, Algo: XSR 1.6, BB5
PAPUBKEYS Hash for CMT: 17AC758130EC0A40BAB0A0E31B342A01D17B8EC0
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x0007FFFF, ONENAND
EraseArea[0,CMT]: 0x000C0000-0x008BFFFF, ONENAND
EraseArea[0,CMT]: 0x010C0000-0x170FFFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 1.420s
Writing all blocks...
Initializing TurboCache...
TurboCache Loaded!
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT SOS+PMML Certificate...
Writing CMT SOS+DECOMP Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT GENIO_INIT Certificate...
Writing CMT SOS+IVE3A Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT LDSP Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 24.24s
Flashing Speed: 47869.21 kBit/S

Br
CycloneBox Team

Que más les puedo Decir... Cyclone Rules!!!!

Saludos. Enjoy!

[miguelpaolo]

[25.06.2012] Cyclone Box Installer v1.21 Released

--------------------------------------------------------------------------------

Hi to all, new Installer for Cyclone Box is ready to download.

What's new?


Quote:
=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes

Small tests:


800 FF


Quote:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v257.6
Build: 12
Timestamp: 2012-02-17 14:40:05
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 08F70ECD76F6E4EE142BE82BA00143C3E4BC91036680A62C2A 3EF07508099060B5BCAD7BA00D151307A006BB
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM801_12w14_prod_generic_nokia_osbl.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:40:02
Signer S/N: 1725
Signer User ID: 10275021
Auth Level: Care
Data Encryption: 0
Image Index: 1
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 936.552kB @ 0x000000000007D200
Write taken 0.437s (Average speed: 17556,36kBits/s)
ESCO: Processing RM801_12w14_prod_generic_adsp.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:37:16
Signer S/N: 1735
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 3
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "adsp.mbn" (5.368MB)
Flushing...
Flushed OK
Write taken 7.847s (Average speed: 5730,02kBits/s)
ESCO: Processing RM801_12w14_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-06 09:40:01
Signer S/N: 1738
Signer User ID: 10275021
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (15.961MB)
Flushing...
Flushed OK
Write taken 24.243s (Average speed: 5515,28kBits/s)
ESCO: Processing RM801_12140_prod_760_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98022316
Signer Timestamp: 2012-04-20 12:32:28
Signer S/N: 1110
Signer User ID: 508009728
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 353.543MB @ 0x0000000010000000
Write taken 139.823s (Average speed: 21209,86kBits/s)
ESCO: Processing RM801_12w14_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-06 09:36:19
Signer S/N: 1719
Signer User ID: 10275021
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000003C000000-0x000000077DFFFFFF (29.32GB)
Erase taken 11.232s
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1750.0805.8773.12140
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer © Nokia
IMEI 359289045145774
Mastercode 5573422330
Public ID 8F07A22B55784E8C893370340D947D55
Product Code 059M3C1
Basic Product Code 059J2N6
Module Code 0205051
NCSd Version 1.9
HW Version 112.1402.2.3
SW Version 1750.0805.8773.12140
PSN Number 0022D28AB
ESN 00000000
WLAN MAC 6CE9070E42230000
BT ID 6CE9071AEF6B000000000000
Battery Life 35%
Battery Cycle Count 65535
Battery Temperature 38.6C
Battery Voltage 3795mV
Battery Flags 297
Battery Standby Current -6mA
Battery Max Load Current -800mA
Battery Health 860
Battery Average Current -27mA
Battery Remaining Capacity 482mAh
Battery Full Charge Capacity 1394mAh
Read info thread finished, continuing...
Flashing Successfull!

610 FF

Quote:
If phone is alive, It will be automatically swithced to OSBL mode.
If software can't switch to OSBL mode, or phone is generally DEAD do folllowing:

1. Turn OFF device, wait 15 seconds afterwards
2. Eject USB cable, wait 10 seconds
3. Press and hold Volume-UP button
4. Insert USB Cable. OSBL should be booted.

Booting CMT...
[Nokia USB Connectivity]: WinUSB Port opened OK!
Switching to RAW Mode...
[Nokia USB Connectivity]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
OSBL Details
Protocol: v1.1
Version: v256.0
Build: 1
Timestamp: 2012-02-22 11:37:26
OSBL Bootloader Ready
USB&UART Tracing set
[HA Auth] : Elevating permissions to RnD
Requested Auth Elevation Level: RnD
[HA Auth] : Challenge : 501AFF8D3A1D2B693BD8FEC40C1C55C5CB7F7E7DAF2FF78CEA 254978752CF80142347C1C31C0AB751C001F38
[HA Auth] : Calculating SHA256-ECC Response...
[HA Auth] : ERROR, No HA dongle found, can't elevate, Ignore this message if you flash original Images
ESCO: Processing RM835_12w16_prod_generic_amss.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031568
Signer Timestamp: 2012-04-13 19:53:21
Signer S/N: 2315
Signer User ID: 10318699
Auth Level: None
Data Encryption: 1
Image Index: 4
Asic Index: 0
Type: File Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing File "amss.mbn" (18.229MB)
Flushing...
Flushed OK
Write taken 18.782s (Average speed: 8139,50kBits/s)
ESCO: Processing RM835_12w16_prod_generic_user_area_erase.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98031573
Signer Timestamp: 2012-04-13 19:50:07
Signer S/N: 2312
Signer User ID: 10318699
Auth Level: None
Data Encryption: 0
Image Index: 6
Asic Index: 0
Type: Image Erase
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Erasing 0x000000004C000000-0x0000000795FFFFFF (29.160GB)
Erase taken 0.172s
ESCO: Processing RM835_12160_prod_296_01_boot.esco...
OSBL Certificate Details
Magic: WP70
Version: 0
Signer Server ID: 0x98030051
Signer Timestamp: 2012-04-19 06:27:32
Signer S/N: 953
Signer User ID: 2150079744
Auth Level: None
Data Encryption: 0
Image Index: 2
Asic Index: 0
Type: Image Write
Hashtable Parsed OK
Sending Certificate...
Certificate Accepted...
[ASIC 0, Storage 4,1] Writing 307.683MB @ 0x0000000028000000
Write taken 94.115s (Average speed: 27422,85kBits/s)
Restoring Modem from BACKUP_RAMFS_IMAGE...
Restore OK
Restarting MCU...
All ESCO Images Processed Successfully
Reading info...
[Urządzenie kompozytowe USB]: WinUSB Port opened OK!
[Nokia USB Connectivity]: WinUSB Port opened OK!
MCU Version 1066.0000.8773.12160
MCU Date N/A
Product Lumia Series (Nokia Lumia Series)
Manufacturer © Nokia
IMEI 359313043774250
Mastercode 551675110
Public ID 88B3433D92343DDEFFED8DFC7EF2952F
Product Code 059P4D7
Basic Product Code 059L3R3
Module Code 0205127
NCSd Version 1.9
HW Version 112.1569.1.0
SW Version 1066.0000.8773.12160
PSN Number 0468BC2AB
ESN 00000000
WLAN MAC 3C363D77083A0000
BT ID 3C363D75337A0000FFFFFFFF
Battery Life 29%
Battery Cycle Count 65535
Battery Temperature 29.3C
Battery Voltage 3787mV
Battery Flags 312
Battery Standby Current -3mA
Battery Max Load Current -500mA
Battery Health 356
Battery Average Current 142mA
Battery Remaining Capacity 381mAh
Battery Full Charge Capacity 1322mAh
Read info thread finished, continuing...
Flashing Successfull!

Where from download?
ALWAYS FRESH installer you can get at: http://www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.

Firmware upgrade is not needed.

Join us on xxx: Cyclone Box | xxx

Stay tuned,
Cyclone Team

[mauro1988]

actualizacion 25/06/12

instalador v1.21
06/25/2012

- Nueva BB5 FBUS / USB Cargadores v12.08.00 Alta
- Productos de apoyo basados ​​en Qualcomm añadido (Lumia 800, 610, etc)
- Intermitente modo Normal es compatible
- Muerto en modo intermitente con el apoyo
- Degradar el apoyo
- Soporte para múltiples configuraciones de la CNT Qulacomm
- Soporte de borrado seguro Área de Usuario - esto tarda unos 15-25 minutos
- Información básica lea incluyendo la batería, etc información para los productos Lumia
- Variante de selección automática de productos Lumia
- Cruz-flash es compatible, si los partidos de hash de clave pública
- Después de conectar los productos en el modo Normal, los conductores de Zune debe estar instalado. Llévelos a C: \ Archivos de programa \ Cyclone Box \ Drivers \ ZuneDrivers
- Los conductores intermitentes se instalará de forma automática, sin embargo en algunos problemas que acabamos de instalarlos manualmente desde C: \ Archivos de programa \ Cyclone Box \ Drivers \ LumiaFlashing
- Botón Cancelar mejora
- Base de datos predeterminada SX4 actualizado, añadió 30 nuevos modelos
- Nokia Connectivity cables conductores actualizado a v7.1.78.0
- Cambios menores y correcciones de errores

Fichero(s) Adjunto(s)

 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 153.1k ) Número de descargas: 0
 cycloneb... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 77.11mb ) Número de descargas: 578

 

[miguelpaolo]

Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!
Hi to all,

Cyclone v1.0.1.684
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes

Just run Cyclone, and autoupdate will fetch new version automatically.

Join us on xxx: Cyclone Box | xxx

Best Regards,
Cyclone Box Team

[newhwk]

Cyclone v1.0.1.684 Released, One-click FREE Simlock CS Repair for XGold213 Added!!
Hi to all,

Cyclone v1.0.1.684
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes

Just run Cyclone, and autoupdate will fetch new version automatically.

Join us on xxx: Cyclone Box | xxx

Best Regards,
Cyclone Box Team

Traduccion segun San Google:
Cyclone v1.0.1.684 Lanzamiento, con un solo clic GRATIS simlock Reparación CS para XGold213 Añadido!
Hola a todos,

Cyclone v1.0.1.684
- Se ha añadido PRIMERA EN EL MUNDO, SIN con un solo clic de reparación de servicio de contacto para los teléfonos basados ​​en XGold213. No es necesario comprar RPL! Basta con hacer clic, y en un segundo a su CS irán (si la causa de bloqueo de la SIM CS es malo, y la razón de esto es restablecer NCK por softs gratis).
- Los problemas de fragmentación de memoria fija durante el flasheo Lumia
- Los problemas del cursor fijo
- XP son compatibles con USB corregido parcialmente
- Cambios menores y correcciones de errores

Simplemente ejecute el Cyclone, y la actualización automática obtendrá la nueva versión de forma automática.

Únase a nosotros en xxx: Cyclone Box | xxx

Saludos cordiales,
Cyclone Box Team

[mauro1988]

27/06/2012
ciclón v1.0.1.684
- Se ha añadido PRIMERA EN EL MUNDO, SIN con un solo clic de reparación de servicio de contacto para los teléfonos basados ​​en XGold213. No es necesario comprar RPL! Basta con hacer clic, y en un segundo a su CS irán (si la causa de bloqueo de la SIM CS es malo, y la razón de esto es restablecer NCK por softs gratis).
- Los problemas de fragmentación de memoria fija durante el flasheo Lumia
- Los problemas del cursor fijo
- XP son compatibles con USB corregido parcialmente
- Cambios menores y correcciones de errores

Modelos soportados:
Asha 200 (RM-761)
Asha 200 (RM-762)
C1-01 (RM-607)
C1-01 (RM-608)
C1-02 (RM-643)
C1-02 (RM-644)
C2-00 (RM-704)
C2-02 (RM-692)
C2-02 (RM-693)
C2-05 (RM-724)
C2-05 (RM-725)
C2-03 (RM-702)
C2-06 (RM-702)
C2-07 (RM-692)
C2-08 (RM-702)
X2-02 (RM-694)
X2-05 (RM-772)

Simplemente ejecute el ciclón, y la actualización automática obtendrá la nueva versión de forma automática.

Fichero(s) Adjunto(s)

 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 171.29k ) Número de descargas: 0

 

[wasson6000]

Cyclone v1.0.1.713 Released
Hi, New update for Cyclone Box is ready.

What's new ?

- USB Booting problem solved
- Improved XGold2 Security Repair
- Improved RAPUv1, RAPUv2 USB Booting
- Minor changes and bugfixes

Update will be fetched automatically.
BR,
Cyclone Team

[mauro1988]

28/06/2012
- Arranque USB problema resuelto
- Mejora de la Seguridad XGold2 Reparación
- Mejora de la RAPUv1, RAPUv2 Arranque USB
- Cambios menores y correcciones de errores

Fichero(s) Adjunto(s)

 ScreenSh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 141.12k ) Número de descargas: 0

 

[dapx]

Cyclone Box Firmware v02.05 Released
Hi, firmware v02.05 for Cyclone Box is Released.

New MEPs added:

MEP-12599-004
MEP-12907-003
MEP-17568-004
MEP-24660-002
MEP-26490-001
MEP-26900-001
MEP-27501-002
MEP-27559-001
MEP-27561-001
MEP-29080-001
MEP-40488-001
MEP-46976-001

Stay tuned....

Best Regards,
Cyclone Box Team

Saludos. Enjoy

[Franklin505]

27.08.2012
iPhone IMEI check service is restored now. Service is not free anymore. Single check costs you 1 Cyclone Credit. Once you've checked your phone, data is cached on server and you can check it again for free. Example output:

[imei] => 013128003164559
[status] => Delivered
[carrier] => AT&T USA
[locked] => Yes
[created] => 1346098925
[delivered] => 1346098982
[details] => stdClass Object
[errorCode] =>
[serialNumber] => QR213MTGA4S
[productVersion] => 5.1
[countryCode] => US
[partDescription] => IPHONE 4 16GB BLACK
[appliedActivationPolicyID] => 52
[assetTag] =>
[futureDataA] =>
[futureDataB] =>
[ban] =>
[carrierCode] => AT&T USA
[contractStartDate] =>
[contractEndDate] =>
[deviceFamily] => iPhone
[firstUnbrickDate] => 1.334624276E+12
[initialActivationPolicyID] => 52
[lastRestoreDate] =>
[lastUnbrickDate] => 1.334625193E+12
[macAddress] => 6CC26B9B4E58
[nextTetherPolicyID] => 52
[unbricked] => 1
[unlockDate] =>
[unlocked] =>
[imeiNumber] => 013128003164559
[ctn] => 18329225876
[iccID] => 89014104243590399073
[formattedContractStartDate] =>
[formattedcontractEndDate] =>
[formattedFirstUnbrickDate] => 17/04/12
[formattedLastUnbrickDate] => 17/04/12
[formattedLastRestoreDate] =>
[formattedUnlockDate] =>
[initialActivationPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[bluetoothMacAddress] => 6CC26B9B4E57
[nextTetherPolicyDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy
[appliedActivationDetails] => US AT&T Puerto Rico and US Virgin Islands Service Policy

[Zilre]

TRADUCCIÓN

Service is not free anymore.
Single check costs you 1 Cyclone Credit.
Once you've checked your phone, data is cached on server and you can check it again for free.

CÓDIGO

El servicio no es gratuito ya.
Solo cuesta 1 crédito Cyclone.
Una vez que se haya registrado el teléfono, los datos se almacenan en el servidor y se puede comprobar una vez más de forma gratuita.

[Kampe2009]

Nueva Actualizacion

=====================
Installer v1.22
09.11.2012
=====================
- New CPU support added, XGold223 (Asha 308, Asha309)
- Supported operations: Write Flash, Read/Write Certificates, Read RPL, Write RPL, etc...
- Firmware v02.11 Released
- Lumia SmartTP® introduced, for testers only (can detect short-circuits between Lumia eMMC Points (MISO,MOSI,CLK,CS), GND, or VCC, it shows also link quality). Use on _POWERED OFF_ PCB! When connecting power, it can show FALSE status! Very helpful during soldering time.
- New BB5 Loaders Added
- Lumia USB Flashing improved
- Latest Blackberry MEPs added
- Improved flashing speed and NPC certs reading time
- Improved CBUS protocol handling (sometimes it wents out of synchronization)
- Fixed BSI spurious glitch problem with ~2.x firmware
- Fixed DCT4 booting problems
- Improved FBUS Local Mode entry
- XGold213xx certificates Backup Added (NPC,HWC,CCC,...)
- XGold213xx Full Flash chip dump to BIN added
- XGold213xx Low-level PMM dump added (can dump PM from dead mobile)
- XGold213xx Low-Level FILESYSTEM dump from dead mobiles added. This dumps full FAT16 user data partition to BIN file for further actions (analysis, recovery, forensics, ...)
- Minor changes and bugfixes

Notes about XGold 223 flashing: Switching to RAW mode is not supported (i.e. flashing from local/test mode, ROM will respons with empty public id (000000...) - very same story as with rapido). Battery reset needed, software will prompt you, but not always. Keep it noticed.

Notes about XGold 223 RPL: Readen RPL is not full RPL backup (missing crypted PM308 data). This phone is very TexasInstruments-Nokia like, but not really. Once loaders with assymetric key hack is not ready, you SHOULDN'T full erase your phone any way.