Actualizaciones De Cyclone!!!! Solo Actualizaciones, Cualquier Otro Mensaje Es Eliminado Opciones

[Eliminado_geovanny78_*]

28-10-2009 New Cyclonebox firmware Released

New Cyclonebox Nokia firmware was uploaded to our server.

Signature: Cyclone Nokia Application v1.09, (Oct 28 2009 15:56:27, gcc-4.2.2, RTOS v5.2.0), Type: Signed Production Application, Flags: NoFlags

Upgrade your box as usual using Box Maintenance functions.
To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.

Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

Each box have now 2 SecurityArea upgrade credits, and 3 MainFirmware upgrade credits. Should be enough in case of problems. For more contact me, Cyclonebox or Honey.



Best Regards,
Cyclone Team

[Anunciante Autorizado]

[LeO..]

06-11-2009 New Cyclonebox Firmware Released

New Cyclonebox Nokia firmware is uploaded to our server.

Box Firmware: Cyclone Nokia Application v01.0A, (Nov 6 2009 01:26:23, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application


Upgrade your box as usual using Box Maintenance functions.
To enter box bootloader mode which allows firmware rewriting, re-plug it from USB socket.
Completly Fixed problem when box failed to start sometimes after upgrade (Box is not in needed mode), and other little fixes too.
To all users who had non-starting box since last upgrade (especially HW A110/A111 owners), please upgrade it with current firmware and post results.

[LeO..]

Also Added LED-progress upon Main Firmware Boot ; this will help to diagnose bootup problems in future; meanings of LED blinking upon startup below
- Code Optimizations
- RTOS Code Updated to 6.0.0
- GCC Compiler Updated to 4.3.2
- Device Framework Updated to 1.5.0
- Little Bugfixes

Firmware 01.0A LEDs Meaning upon Main Firmware startup
GREEN, BLUE, RED, ORANGE Firmware Starting - Initializing Interrupts and PLL Clocks (at this stage check 12MHZ Crystals)
GREEN, RED, ORANGE Initializing HW Modules, RTC (at this stage check RTC Clock)
RED, ORANGE Doing Security Checkup (Should not hang here)
ORANGE Initializing USB Stack (Check crystals, USB Cable Length, etc)
NO LEDS Firmware Booted

[Leonize]

*** Cyclone Box Firmware v01.0C Available ***
Signature:

Quote:

Cyclone Nokia Application v01.0C, (Nov 25 2009 03:18:28, gcc v4.3.2, RTOS V6.0.0), Type: Signed Production Application

Changelog:

- SmartCard reset procedure rewritten from scratch, SC Reset takes now 20-30ms instead 0.5 - 1s
- Baud autonegotiation for SmartCards added using FI/DI ATR Parameters, this results faster card transactions, etc.
- Clock speed negotiation added for some cards (up to 20MHz)
- Added support for protocol autonegotiation (T=0, T=1), for some cards
- Added support for D5xxxxxx and D6xxxxxx series Cyclone Cards (TPDU problem)
- More debug messages while dealing with Smartcard added
- Minor changes and bugfixes

If your box working ok, and you aren't encountering SmartCard problem(s), update is not necessary.

Best Regards,
More coming..............
Cyclone Team

[Eliminado_NicaUnlock_*]

** Cyclone Shot, "HASH 9DD" Unlock, V30/V300 unlock, Simlock rebuild and more... **

Hi,
First of all, happy new year to all of our customers.
New Cyclone Installer v1.03 is ready (final installer, no bulk updates needed).

=====================
Installer v1.03
02.01.2010
=====================
- Added new BB5 Unlock,Relock,Autolock,Repair Method by RPL Generation, this uses server and consumes 10 logs whilst your credits amount must be > 100.
- Supported are ALL PA_SL2 Phones, both RAPv3 and RAPIDO, with following hashes:

9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
38F312750F686F9FC9B1B3778774A195
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

- Before unlock software will ask you (when possible) if you want RPL calculation. If you don't need unlocking by RPL, simply click NO and old free unlocking methods will be used (PM308+120 recalc, Secure RAM dump and NCK calc on RAPIDO PA_SL2 phones, etc). However there are some phones which might be unlocked only using new method (9DDB - 3600,5220,7310, or new 5800 >v.30, new N96, etc)
- After unlock, requested RPL file will be saved to STORED FILES dir, it might be used later after phone chip erase, etc - as a generic backup
- To Autolock/Relock use "Import SL5" function and point to SL5 array file in "UnlockData" dir, with SW comes few generated files
- If you need SL5 file for your network, use "Create SL5" button and enter MCC-MNC, SL5 file will be generated for you and your phone might be relocked
- SL Area might be repaired using UNLOCK button for SL2 phones
- RPL Write bugs fixed ("simlock not accepted" after few tries)
- Path "/" problem fixed
- Memory manager updated to v4.94
- New skin manager introduced (6.53) - removed flash files selection bugs
- GUI redesigned a bit
- Nokia Connectivity Cable Driver updated to v7.1.22
- 2760h RM-391 v06.83 Unlock / Relock added
- 2330c RM-512 v09.55 Unlock / Relock added
- 2330c-b RM-513 v09.55 Unlock / Relock added
- 2720f RM-519 v08.42 Unlock / Relock added
- 2720f-b RM-519 v08.42 Unlock / Relock added
- 2720f RM-519 v09.55 Unlock / Relock added
- 2720f-b RM-519 v09.55 Unlock / Relock added
- SX4 Bypass during BB5 Unlock removed, is no needed anymore
- Fixed USB stack hanging up on some Windows configuration due to invalid hexcodes in BoardCode Revision USB Field
- After Super DCT4 Activation in Credits tab box Security Page is automaticlly upgraded, no need doing it manually
- New firmware v01.15 introduced - box can switch itself from MAIN mode to BOOT mode (no USB reconnect needed anymore)
- 6220c,3600s booting fixed in new firmware
- New Secure bootloader v02.10 introduced
- New bootloader supports more types of smartcards (autobaud, PTS protocol negotiation, etc)
- Secure BootAgent v1.00 introduced in new firmware
- Firmware RTOS Code Updated to v6.0.1
- Slightly code optimizations and stability improvments in new firmware
- Secure Bootloader upgrade introduced after box maintenance
- Added support for Cyclone box HW REV A116, A117, A118, A119, A11A, A11B, A11C

Here is example phones unlocked by new RPL Method,
5800 SW v31.x:

BB5 Unlock Started...
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer © Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
FlashChip[0,CMT]: 0x00EC004000800121, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support and selecting Unlock Method...
Selected Unlock Method: RPL Calculation
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_ROM_ID: 4B9B75103E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
Receiving RPL from Server...
Cyclone Server (1.0.0.549), Cyclone Box Team 2008, 2009, 2010 - Ready.
Disconnected from Cyclone Server
Credits Left: 880
Saving RPL File to "RM-356_353205037049770_2010-01-02_015618.Unlock.RPL"
Writing Simlock...
Simlock ACCEPTED OK !
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer © Nokia
IMEI 353205037049770
Mastercode 323571474
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Unlock finished!E51:

Download Link: http://rapidshare.com/files/32908443...xInstaller.exe

! BOX FIRMWARE UPDATE IS NEEDED TO USE LATEST UPDATE !

Best Regards,
Cyclone Team

(stay tuned.... in January )

Mensaje modificado por Motokiller el Jan 2 2010, 12:37 PM

[arnoldo0945]

link de descarga del servidor de Cyclone Box:


http://www.cyclonebox.com/downloads/NewCyc...oxInstaller.exe

Mensaje modificado por arnoldo0945 el Jan 2 2010, 09:53 AM

[arnoldo0945]

Cyclone HotFix

Link de descarga:

http://www.cyclonebox.com/downloads/Cyclone.zip

http://rapidshare.com/files/330741437/Cyclone.zip

Mensaje modificado por arnoldo0945 el Jan 5 2010, 03:59 PM

Fichero(s) Adjunto(s)

 Dibujo.J... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 27.08k ) Número de descargas: 0

 

[arnoldo0945]

Nuevo Cyclone stable Installer 1.04 (06-01-2010)


http://rapidshare.com/files/330985705/Cycl...oxInstaller.exe

Mensaje modificado por arnoldo0945 el Jan 6 2010, 06:29 AM

Fichero(s) Adjunto(s)

 1.04.JPG... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 42.85k ) Número de descargas: 0

 

[otrebor]

Cyclonebox hotfix released (2010-01-05)


-fixed bug for old BB5 phones

copy new exe in X:\program files\Cyclonebox


Download Link : http://rapidshare.com/files/330741437/Cyclone.zip


Wbr
Cyclonebox team

[Leonize]

download here links

06/01/2010 CycloneBox STABLE Installer v1.04 Released
=====================
Installer v1.04
06.01.2010
=====================
- Included latest critical hotfix for old BB5 unlocking methods when phone after unlock was still locked, update is highly RECOMMENDED!

http://hotfile.com/dl/23184178/37ed7...xinstaller.exe

http://www.badongo.com/es/file/19570815

http://www.filefactory.com/file/a171...xinstaller.exe

http://www.zshare.net/download/70872436d166858f/

http://depositfiles.com/es/files/6g3wmwqoa

http://netload.in/datei1t6HTUagse.htm

http://www.2shared.com/file/10495450...installer.html

http://uploaded.to/file/1jtd2o

Mensaje modificado por Leonize el Jan 7 2010, 11:04 AM

[Eliminado_ELGAVILAN_*]

parche necesario para usar la ultima actualizacion de la cyclone box.

corrije errores de unlock a los bb5 y otros problemas mas.


aqui les dejo el parche



http://rapidshare.com/files/334724272/Cyclone_Parche.zip


saludos a todos

[Eliminado_geovanny78_*]

CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR

CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR

--------------------------------------------------------------------------------

Hi to all

Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.
One condition you need to met, you need have 200 credits on your account.

Stay tuned for some NCK-thing

Best Regards,
Cyclone Team.

CICLÓN BOX - FREE (sin créditos) SL2 RPL CALC (inc 9ddb) para desbloquear / vuelve a bloquear / REPAIR

Cyclonebox 01-16-2010, 16:09 01.16.2010, 16:09
Hi to all :cool: Hola a todos: cool:

Starting from now all calculated SL2 RPLs using Cyclone Server are FREE. A partir de ahora todos los RPLs SL2 calcula utilizando el ciclón Server son GRATIS.
One condition you need to met, you need have 200 credits on your account. Una de las condiciones que necesita para cumplirse, es necesario tener 200 créditos en su cuenta.

Stay tuned for some NCK-thing Manténgase sintonizado para algunos NCK-cosa;)

Best Regards, Saludos cordiales,
Cyclone Team. Ciclón equipo.

[Leonize]

CYCLONE BOX - FREE (NO CREDITS) SL2 RPL CALC (inc 9ddb) FOR UNLOCK/RELOCK/REPAIR

--------------------------------------------------------------------------------

Hi to all

Starting from now all calculated SL2 RPLs using Cyclone Server are FREE.
One condition you need to met, you need to have 101 credits on your account.

Stay tuned for some NCK-thing


Best Regards,
Cyclone Team.

NOTE ADDED : The RPL is only for simlock repair!! Not for superdongle repair


Hola a todos

A partir de ahora todos los RPLs SL2 calcula utilizando el ciclón Server son GRATIS.
Una de las condiciones que necesita para cumplirse, es necesario tener 101 créditos en su cuenta.

Manténgase sintonizado para algunos NCK-cosa


Saludos cordiales,
Ciclón equipo.

AGREGADOS NOTA: El RPL es sólo para la reparación de simlock!! No para la reparación superdongle

[Eliminado_geovanny78_*]

24-01-2010 CYCLONE SHOT SLEEPING SHOT! First STANDALONE BB5 NCK Calculator Released!

Hi,

- Added STANDALONE, FREE (NO LOGS, NO INTERNET!!!) NCK Reader (levels.. pw1..7) for ALL BB5 RAPv3 and RAPIDO phones (including 9ddb new hash, together PA_SL1 and PA_SL2 phones)
- Unlocking Method is now being selected before unlock
- Added BB5 RPL Calc for PA_SL1 phones (using server) for Simlock Repair
- Few changes with BB5 booting, minor bugfixes, cosmetic changes, etc

!! FIRMWARE UPGRADE IS MANDATORY IN ORDER TO USE THIS UPGRADE !!

KEEP IN MIND STILL SOME PHONES (I.E. TELCELL MEXICO) CAN'T BE UNLOCKED USING NCK, THIS CASE USE FREE RPLS.


Hola,

- Añadido independiente, gratuito (LOGS NO, NO INTERNET!) NCK Reader (levels.. Pw1 .. 7) Por todas BB5 RAPv3 y teléfonos RAPIDO (incluyendo nuevo hash 9ddb, así como teléfonos PA_SL1 y PA_SL2)
- Liberar método se está seleccionado antes de desbloquear
- Añadido BB5 RPL Calc para teléfonos PA_SL1 (utilizando el servidor) para Operador de reparación
- Pocos cambios con el arranque BB5, correcciones de errores de menor importancia, los cambios cosméticos, etc

!! Actualización de Firmware es obligatorio para poder utilizar esta actualización!

TENER EN CUENTA TODAVÍA Algunos teléfonos (IE Telcell MEXICO) NO SE PUEDE desbloquear usando NCK, este caso de uso GRATIS SLPR

Avaiable Unlock Methods Now:

PM308 Recalculation (Standalone, Free)
NCK Calculation (Standalone, Free, New Method)
NCK Calculation (Standalone, Free, Old Method) Remark: Works only on SL2 Rapido Phones, SW < v30
RPL Calculation (Server Based, Need Credits)


(need select needed unlock method before unlock)

Some phones unlocked by new method of NCK Calculation:

Desbloquear Métodos Disponibles ahora:


PM308 recálculo (independiente, libre)
NCK de cálculo (independiente, Free, New Method)
NCK de cálculo (independiente, libre, viejo método) Nota: sólo funciona en teléfonos SL2 Rapido, SW <V30
RPL de cálculo (basados en servidores, sin créditos)

(necesidad de seleccionar necesario desbloquear el método antes de desbloquear)



3600 SL2 HASH 9DDB


BB5 Unlock Started...
MCU Version V 07.23
MCU Date 17-07-09
Product RM-352
Manufacturer © Nokia
IMEI 353661016041511
Mastercode 261533754
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220C00008921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: E4BA39EE248FC5E165E280B6AD60C5C0B1A1DA6D
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006030C192101033000
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 1240001610F05850C9695BBBB518C05E116F9CA1
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT_BOOT_ROM_CRC: 273F6D55
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+949788008380325+1#
#pw+854251965631463+2#
#pw+914751634966481+3#
#pw+253083871743310+4#
#pw+160466531792339+5#
#pw+300636055043893+6#
#pw+831255876340647+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V 07.23
MCU Date 17-07-09
Product RM-352
Manufacturer © Nokia
IMEI 353661016041511
Mastercode 261533754
Simlock Server SIMLOCK SERVER
Simlock Key 2600300000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26003F
Simlock NCK #pw+831255876340647+7#
Unlock finished!


5300 SL1 HASH BAF3

BB5 Unlock Started...
MCU Version V 07.20
MCU Date 23-10-08
Product RM-174
Manufacturer © Nokia.
IMEI 356407014798521
Mastercode 471632634
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2600600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26006F
Simlock NCK #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK #pw+˙˙˙˙˙8€+255#
Simlock NCK #pw+`+38#
Simlock NCK #pw+˙˙˙ř4&o˙+255#
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.9.11.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC220800006921, Samsung, NOR
FlashContent[0,CMT]: 00000000000000000000000000000000, NOR
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAP3Gv3_algo.fg, Type: Algorithm, Rev: 0.9.17.0, Algo: BB5 ALGORITHM
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: D6D07E588DC4E06DEE7012A3C0ECC4E35D3CE263
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006010C192101001101
CMT_EM_ASIC_ID: 00000232
CMT_EM_ASIC_ID: 00000353
CMT_PUBLIC_ID: 22C000133A0B6E561E7820319A02ED6A64141878
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
CMT_BOOT_ROM_CRC: 191EC665
CMT_SECURE_ROM_CRC: DFAAF68F
RAP3Gv3_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+160352032409019+1#
#pw+973120735381744+2#
#pw+821765151806152+3#
#pw+691221967364775+4#
#pw+282254235199826+5#
#pw+674406233058521+6#
#pw+159388652648611+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V 07.20
MCU Date 23-10-08
Product RM-174
Manufacturer © Nokia.
IMEI 356407014798521
Mastercode 471632634
Simlock Server SIMLOCK SERVER VERSION 63
Simlock Key 2600600000000000
Simlock Profile 8000000000000000
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26006F
Simlock NCK #pw+@U˙˙˙˙˙˙˙˙˙˙+17#
Simlock NCK #pw+˙˙˙˙˙8€+255#
Simlock NCK #pw+`+38#
Simlock NCK #pw+˙˙˙ř4&o˙+255#
Unlock finished!


E51 SL2 HASH CAEEBB

BB5 Unlock Started...
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer © Nokia
IMEI 357663016552576
Simlock Server SIMLOCK SERVER
Simlock Key 2600100000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26001F
Reading Security Block...
Security block OK!
Determining PA Simlock...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.37.1, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
FlashChip[0,CMT]: 0x00EC004000600022, Samsung, ONENAND
FlashContent[0,CMT]: 00000000000000000000000000000000, ONENAND
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
Transmission Mode Requested: Single Line, 8 bit, Accepted: Single Line, 8 bit
RAPIDOv11_algo.fg, Type: Algorithm, Rev: 0.1.40.0, Algo: XSR 1.5
Flashbus Write baud set to 2.0Mbits
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 35AC54F8E31BE1357AB78D73834F020906331653
APE Boot skipped on user request
Flashbus Write baud set to 5.0Mbits
Restarting MCU...
Determined PA Simlock: PA_SL2
Checking for Rootkey Hash support with selected Unlock Method...
Selected Unlock Method: NCK Calculation (new method)
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101021103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0E60010930850058EEBC00CD174EE90CEB054FF0
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: A8C1D671
CMT_SECURE_ROM_CRC: 3E691FF8
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 0.1.30.0, Algo: BB5
Flashbus Write baud set to 1.0Mbits
Flashbus Read baud set to 98Kbits
Using OLD BB5 FLASHING PROTOCOL
Exploiting - running preloader...
Preloader running OK, Running Custom Loader...
Custom loader running OK! Working...
#pw+994514387188636+1#
#pw+274615204717885+2#
#pw+842137240978606+3#
#pw+544842230747164+4#
#pw+653436892097337+5#
#pw+113577555381583+6#
#pw+360432392883102+7#
Sending NCK Code (Level 7)..
NCK Accepted! Phone unlocked OK!
MCU Version V ICPR71_08w44.4
MCU Date 11-12-08
Product RM-244
Manufacturer © Nokia
IMEI 357663016552576
Simlock Server SIMLOCK SERVER
Simlock Key 2600100000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: 26001F
Simlock NCK #pw+360432392883102+7#
Unlock finished!



Download Link : http://rapidshare.com/files/340620565/Cyclone.exe

(REPLACE EXE at C:\Program Files\Cyclone Box\)

Best Regards,
"Sleeping" Cyclone Team

Mensaje modificado por geovanny78 el Jan 24 2010, 09:49 PM

[arnoldo0945]

Tambien lo puden bajar del web de Cyclone:

http://www.cyclonebox.com/downloads/Cyclone.exe

Saludos

[arkantos]

Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!!
New version of Cyclone Box Software is ready. There is a lot of changes, here is some of them:

Quote:
- WORLD'S UNIQUE : Standalone Superdongle Key Calculator Added! No internet, no logs, no time! Calculation time - 0.003 sec ! Works for any SL1, SL2 and SL3.

- WORLD'S UNIQUE : Standalone Unlocking/Relocking using RPL Added! No internet, no logs, no time! Calculation time - 0.002 sec ! Works for any SL1 and SL2.

- WORLD'S UNIQUE : Standalone SX4 Authorization Added! Box is now emulating Nokia SX4 card - no need internet, no need logs to authorize ANY Nokia Phone, just box! Works for any SL1, SL2 or SL3. Emulated SX4 works with ORIGINAL NOKIA Superdongle keys (no need rebuild SD), Custom keys (made by Cyclone,MT,UB), etc. In case of Authorization fail, it will automaticly write and authorize using Custom Keys. Authoirzation time - 0.004 sec ! Supported are RAP and RAPIDO mcu, in case of RAPU phones SX4 Remote Card will be used. After authorization with Cyclone, PHONE STILL CAN be Authorized with ORIGINAL SX4 Card!

- WORLD'S UNIQUE - Cyclone can now authorize Barred Phones (with Correct superdongle keys, but with higher KeyIndex ever used than 0 (possible KeyIndex 0..7), SX4 card can use any higher keyindex at time, when higher key is used, lower keys are automaticly not used in future, and phone requires to use higher key index) - UB and other custom boxes can't do it as long SX4 emulation is not 100% Nokia-Like

- WORLD'S UNIQUE : Starting from now, Cyclone Box have ability to make _FULL RPL BACKUP_ of BB5 phones! Current existing SW on market creating only some part of RPL (NPC,HWC,Simlock) - Cyclone is now backing up missing part:
- Added SUPER DONGLE KEY extracting (this Original Nokia one, so after writing it back phone still can be authorized with original SX4 card)

- Added CMLA KEY DATA extracting (That means created RPL File by Cyclone is now 100% SAME AS NOKIA'S ONE! )

- WORLD'S UNIQUE : Added BB5 MCU & DSP Timestamps Reader / Diagnostic Tool. This will help diagnostic of downgraded phone, will read Security Block, decode timestamps of current installed SW (and factory one, or Dejan Hack if exists) with FLASH installed MCU/DSP timestamps. Will have ability to FULL REBUILD downgrade security zone (dead06) soon.

- WORLD'S UNIQUE : BB5 Security Block Analyzer added, this will read Security Block and analyze it's health for content of following Security Data: SIMLOCK DATA, SUPERDONGLE KEY DATA, ECC KEYS DATA, DIV DATA, CMLA (DRM) DATA. Also it reads ST_SIMLOCK_TEST and ST_SECURITY_TEST and when problems occur, recommends actions.

- WORLD'S UNIQUE : Standalone BB5 Calculator Added. This calculated BB5 NCK (levels 1-7) for unlocking purposes. Calculated codes works only with phones which have been relocked with Cyclone Box. To calculate code is needed only IMEI - no need cable, phone, flashbus logger, etc.

- WORLD'S UNIQUE : BB5 Unlock by NCk/RPL, SD Recalc, SX4 auth using USB !! (once log file readen)

- Upon box upgrade (maintenance) Bootloader in box is syncronized with server to avoid Activation Problems
- Bootagent server upgraded to 1.01, fixed "Box is not activated, ID 09)
- Fixed "Access Violation" when Cyclone Box SW is already launched and connection to box opened
- After BB5 Relock, unlock codes is displayed
- More detailed messages is now shown upon new NCK or RPL calculation
- BB5 Security Code Reading is moved to "UserArea" tab (needed space for MCU/DSP timestamp reading and security block analyzing)
- Total unlock/relock time added after operation is finished (thx to arash)
- Box Firmware version is now checked upon loading of Nokia Module - if box firmware is obsolete, SW asks for upgrade and doing it automaticly
- Selected unlock method is now displayed before RootkeyHash support check
- Upon first reading of NCK Code (Extracting) or RPL Calculation, "CYC" log file is stored in "StoredFiles" and next time upon BB5 Security Actions (Calculation of SD, Extracting NCK, Calculating RPL (Relocking)) phone is no booted anymore and whole process took only 1 second!! Keep in mind calculated CYC file is paired with Box Serial number, so in case if your box serial number is changed-go to stored files and purge all "cyc" files.
- Decrypted AES Subblock of Security Block is now checksum checked (16 bytes checksum at end of block)
- Fixed "This is invalid integer..." when parsing phone with damaged IMEI
- When another copy of Cyclone Software is running, message is displayed instead of errors
- New method of NCK Calculation is now default BB5 unlocking method
- When New Method of NCK calculation is selected, PA_SL is not determined already (saves lots of time)
- Skin Manager updated to v6.54 (more stability)
- When BB5 RPL Don't contain Certificates (NPC,HWC) phone isn't booted
- Fixed bug when Flash RPL BB5 Data is being written two times
- Added more verbose debug messages when preparing Boot BB5 Phone
- Garbage characters when dealing with SLPA phones (#pw+___garbage___+1) bug fixed
- New splash screen added, thx to arash, again
- When Cyclone fails to boot APE subsystem, it shows hint about TX2
- APE subsystem is now no longer booted upon CheckFlashingBus
- Changed "Failed to write CMT Cert Data (3)" message, added TX2 information
- BB5 TX2 Line test added after "CheckFlashingBus"
- Before RPL Write, Software testing TX2 Line and when its faulty (not adapter) it showing apporiate message
- Writing BB5 CMT HWC Certificate from RPL fixed (thx to arash)
- Parsing some Simlock Arrays (5130) produced garbage output - fixed (thx to arash again)
- Added support for Cyclone Box HW Rev A11D
Just download EXE file and replace at C:\Program files\Cyclone Box\
Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

You don't need any activations,logs to use this update.

Notes:
SX4 Emulation works offline and emulates SX4 card 1:1, in case of failure still server will be used.

BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei - no need cable or connection to box too).

BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.

Update is fast and most of security functions (sd,rpl) works very fast.

Don't forget to upgrade your Box Firmware to v01.21.

Download Link : http://rapidshare.com/files/349693053/Cyclone.exe

More coming.
Best Regards,
Cyclone Team

[SpLock]

Cyclone BOMB ! Standalone : SX4 Emulation, SD Repair, RPL Calc, BB5 NCK Calc, more!!! Sacado del soporte oficial de la Cyclone

Just download EXE file and replace at C:\Program files\Cyclone Box\
Make sure Installer is installed aswell (this one from january, else you will have message RootkeyHash not supported).

No necesita ninguna las activaciones, los registros a utilizar esta actualización.

PD:
SX4 Emulation works offline and emulates SX4 card 1:1, en caso de fallo del servidor todavía se utilizará.

BB5 NCK Calculator works for phone relocked by Cyclone Only (unlocking using IMEI only, no need know other data, just imei - no need cable or connection to box too).

BB5 USB Unlocking and other security tools works only if phone log (by flashbus) is readen before.

Update is fast and most of security functions (sd,rpl) works very fast.

Don't forget to upgrade your Box Firmware to v01.21.

Descargar Aqui

[Fixcell]

Para los que tienen problema como yo descragar desde rapidsahre aqui les dejo el link...Aqui Link Directo

[Leonize]

Hola ....

Actualizacion de el main de NOKIA cyclone .... del 05/04/10

Finalmente resolvieron problemas de hardware del servidor (reiniciando cada 30minute/hour/2hours desde unos pocos días) y se puede empezar a salir a lo uno por uno, por lo que
El firmware es completamente reescrito y Refactorized desde cero, aquí hay algunos cambios (sólo una parte)
Tengo información sobre:
Flashbus de lectura / escritura optimizaciones.
problemas de arranque BB5 ido (con los teléfonos muertos también) y el tiempo arranque reducida.
Apoyo a nuevo Protocolo (sin embargo nuevo cliente necesita también, que karwos acabado por el momento)
MPU
USB cuestiones pila fija
Solucionado el problema de caja, mientras que colgar el arranque del firmware principal (permanentemente)
Corregidos los problemas de activación permanente
interfaz de tarjeta inteligente mejora
Gestor de arranque de actualización es ahora transparente y "en línea" - sin necesidad de llave del servidor, se actualiza cada caja de inicio
+ Otras cosas ... Es más que empezar

Nuevo protocolo de flasheo de nokias como :
E52 with new ST chip
5800 with new protocol
E51 with new protocol
6220c with new protocol
N97 with new protocol
y mas....

he aqui logs de flasheo con cyclone :

CÓDIGO

n97
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-505_21.0.102_prd.core.C00 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-505_21.0.102_prd.core.C00, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x0AB9FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.921s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 125.671s
Flashing Speed: 7080,19 kBit/S
Restarting MCU...
Processing RM-505_21.0.102_prd.core.C00 (APE)...
Processing RM-505_21.0.102_prd.rofs2.V38 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-505_21.0.102_prd.rofs2.V38, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x079A0000-0x09C9FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.203s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 29.391s
Flashing Speed: 6899,36 kBit/S
Restarting MCU...
Processing RM-505_21.0.102_prd.rofs2.V38 (APE)...
Processing RM-505_21.0.102_C01_prd.rofs3.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-505_21.0.102_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09CA0000-0x0AB9FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 0.79s
Flashing Speed: 934,48 kBit/S
Restarting MCU...
Processing RM-505_21.0.102_C01_prd.rofs3.fpsx (APE)...
Processing RM505_507_21.0.102_uda_1_001.uda.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM505_507_21.0.102_uda_1_001.uda.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x0ABA0000-0x0F71FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.406s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 11.578s
Flashing Speed: 6368,59 kBit/S
Restarting MCU...
Processing RM505_507_21.0.102_uda_1_001.uda.fpsx (APE)...
Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000296
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 0CB000038A720052E7F618F98DD2D5F6E5C93100
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM505_APE_ONLY_ENO_09w23_v0.072.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: DAEF2C397A3F8FC5CA8B1F429D73C94C4A25B15B
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Started group flash erase
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.31s
Writing all blocks...
Writing CMT SOS*ENO Certificate...
Programming Status OK!
All blocks written OK! Time taken 3.406s
Flashing Speed: 6772,35 kBit/S
Restarting MCU...
Processing RM505_APE_ONLY_ENO_09w23_v0.072.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version V ICPR72_09w44.11
MCU Date 20-01-10
Product RM-505
Manufacturer (c) Nokia
IMEI 354225031272243
Mastercode 324273227
IMEI Spare 3A45220513722204
IMEI SV 3345220513722214F0000000
CNT 21.0.102.uda_1_001rRM505_001_000_M015,
PSN CUC268456
Product Code 0576368
Basic Product Code 0570816
PSD 0000000000000000
LPSN 0
WLAN MAC 0025CFC562A9
APE SW v 21.0.102
APE Variant v 21.0.10221.0.102.38.0121.0.102.C01.01
APE Test 0.072
APE HW 256
APE ADSP 256
RETU 16
TAHVO 22
AHNE 11
HW 4001
RFIC |Vapaus_5.1 | Aura_?.?
DSP gadget_ICPR72_09w43_p1
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 0000000000000000
Simlock Key Cnt 1
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!

CÓDIGO

5800
Processing pre flash tasks...
Pre flash tasks finished, continuing...
Processing RM-356_31.0.008_prd.core.C00 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-356_31.0.008_prd.core.C00, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
Flashbus Write baud set to 5.0Mbits
Sending Certificates...
Certificates OK
Partitioning...
Partitioning OK
Started group flash erase
EraseArea[0,CMT]: 0x00040000-0x00082FFF, ONENAND
EraseArea[0,CMT]: 0x00083400-0x003FFFFF, ONENAND
EraseArea[0,CMT]: 0x00400000-0x007FFFFF, ONENAND
EraseArea[0,CMT]: 0x00800000-0x00D5FFFF, ONENAND
EraseArea[0,CMT]: 0x00D60000-0x09E5FFFF, ONENAND
Erase Partition (CMT)
Waiting 320s for erasure finish...
Erase taken 0.875s
Writing all blocks...
Writing CMT ADA Certificate...
Writing CMT KEYS Certificate...
Writing CMT PRIMAPP Certificate...
Writing CMT RAP3NAND Certificate...
Writing CMT PASUBTOC Certificate...
Writing CMT PAPUBKEYS Certificate...
Writing CMT SOS*UPDAPP Certificate...
Writing CMT SOS*ENO Certificate...
Writing CMT SOS*DSP0 Certificate...
Writing CMT SOS*ISASW Certificate...
Writing CMT SOS+CORE Certificate...
Writing CMT SOS+ROFS1 Certificate...
Programming Status OK!
All blocks written OK! Time taken 112.282s
Flashing Speed: 7015,94 kBit/S
Restarting MCU...
Processing RM-356_31.0.008_prd.core.C00 (APE)...
Processing RM-356_31.0.008_prd.rofs2.V06 (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-356_31.0.008_prd.rofs2.V06, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x06560000-0x0915FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.250s
Writing all blocks...
Writing CMT SOS+ROFS2 Certificate...
Programming Status OK!
All blocks written OK! Time taken 39.297s
Flashing Speed: 6899,31 kBit/S
Restarting MCU...
Processing RM-356_31.0.008_prd.rofs2.V06 (APE)...
Processing RM-356_31.0.008_C01_prd.rofs3.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM-356_31.0.008_C01_prd.rofs3.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09160000-0x09E5FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.78s
Writing all blocks...
Writing CMT SOS+ROFS3 Certificate...
Programming Status OK!
All blocks written OK! Time taken 1.562s
Flashing Speed: 6593,12 kBit/S
Restarting MCU...
Processing RM-356_31.0.008_C01_prd.rofs3.fpsx (APE)...
Processing RM356_31.0.008_020_xxx_U01.uda.fpsx (CMT)...
Booting RAP...
CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101031103
CMT_EM_ASIC_ID: 00000295
CMT_EM_ASIC_ID: 00000B22
CMT_PUBLIC_ID: 16900018F3740052C3ECA61A74BBE7E9A3A34FCE
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
CMT_BOOT_ROM_CRC: 4B9B7510
CMT_SECURE_ROM_CRC: 3E691FF8
RM356_31.0.008_020_xxx_U01.uda.fpsx, Type: Flash Image, Algo: XSR 1.5, BB5
RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.9.50.0, Algo: BB5
Flashbus Write baud set to 650Kbits
Flashbus Read baud set to 98Kbits
Using NEW BB5 FLASHING PROTOCOL
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
RAPIDOv11_XSR15_alg.fg, Type: Algorithm, Rev: 512.9.50.0, Algo: XSR 1.5
Writing CMT PASUBTOC Certificate...
Writing CMT ALG Certificate...
CMT Algorithm Ready!
Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
Box TX2 Data Pin set to: Service Pin 3
Adding FUR Client (CMT, State: Ready)...
CMT FUR Ready!
Box VPP disabled
Internal CMT Phone VPP Enabled
PAPUBKEYS Hash for CMT: 76A20187051C30162EE91C77AE5E6011F5F1BA61
Flashbus Write baud set to 5.0Mbits
Started group flash erase
EraseArea[0,CMT]: 0x09E60000-0x0F71FFFF, ONENAND
Waiting 320s for erasure finish...
Erase taken 0.484s
Writing all blocks...
Programming Status OK!
All blocks written OK! Time taken 1.156s
Flashing Speed: 625,47 kBit/S
Restarting MCU...
Processing RM356_31.0.008_020_xxx_U01.uda.fpsx (APE)...
All images processed OK! Processing post flash tasks...
Reading info...
MCU Version V ICPR72_09w20.8
MCU Date 09-07-09
Product RM-356
Manufacturer (c) Nokia
IMEI 353205037049770
Mastercode 323571474
IMEI Spare 3A35020573407907
IMEI SV 3335020573407947F4000000
CNT v 31.0.008_020_xxx_U01, 18-08-09, vanilla, RM356
PSN CCI237144
Product Code 0576922
Basic Product Code 0578897
PSD 0000000000000000
LPSN 0
WLAN MAC 002547C7A103
APE SW V 31.0.008
APE Variant V 31.0.008V 31.0.008 V 31.0.008
APE Test eno_version
APE HW 256
APE ADSP 256
RETU 15
TAHVO 22
AHNE 11
HW 1101
RFIC 17141715
DSP ICPR72_09w19_1
Simlock Server SIMLOCK SERVER
Simlock Key 2440700000000000
Simlock Profile 8000000000000006
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Flashing successfully finished!

Como lo puedes obtener solo abre el software de cyclone y actualiza en main...

saludos cordiales.

[miguelcpm22]

Hello,
you can download latest beta from here:
Cyclone Beta DCT4RSA BB5 New Protocol



(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight hopefully.).

Don't forget to upgrade box firmware!

Post unlocked phones here.

Best Regards
Cyclone Team

 CycloneB... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 12.2mb ) Número de descargas: 55