Unlocker Nokia :5000 D -2 Type :rm -362 Opciones

[Eliminado_gardner_*]

Buenas tardes

Ya en la actualidad Gracias a todos aprecian el foro y muy bueno.

Si usted me puede ayudar en mi pregunta para desbloquear un Nokia 5000d

En primer lugar esto es lo que estoy softwer utelizar la misma y la siguiente.







Nokia DCT4/WD2/BB5 Service Tool Initialization Started, Engine Revision: 1.0.0.8236
Handling device: [Cyclone Team], [Cyclone Box]
Initializing box...
Box Firmware: Cyclone Nokia Application v01.35, (Apr 16 2010 18:05:39, gcc v4.3.2, RTOS V6.0.1), Type: Signed Production Application, © KarwosSoft 2010 wk13
Box Serial Number: xxxxxxxxxxxxxxxxxxxxx
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk10 / wk14
Initializing security card...
Card Serial Number: xxxxxxxxxxxxxxxxxxxx
Card Firmware Revision: 0109
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,94v PASSED
MCU Voltage 3,30v PASSED
Core Voltage 1,76v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,90v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
Internal Box VPP Enabled
VPP Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
Initializing FBUS...
All initialized - Ready to work
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to Read Product Code -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected
Failed to read info -> Phone not detected


Ahora no tengo los cables para colocar dos teléfonos móviles en el mod de prueba, pero las puntas de la marca UFC.

Yo soy el número 6 utelizar punta y por debajo como por ejemplo, Nokia 2630, las patillas de salida igual que ellos dicen.

En primer lugar los símbolos +, -, y finalmente la BSI y el valor de resistencia a 5,1.


Y yo no soy capaz de hacer lo mismo Unlocker.
Al salir del ciclón poner el logotipo de adaptadores UFX, no se debe conectar el amarillo que viene con el ciclón, que los artefactos explosivos abandonados que el amarillo y para BB5, y el teléfono es un derecho DCT4.

Ahora me gustaría ayudar, por favor tener un teléfono para desbloquear y todavía estoy nueva en estas cosas ya se hayan facilitado una nota de agradecimiento a todos los


Box Maintenance procedure started at 17:35:03
Handling device: [Cyclone Team], [Cyclone Bootloader]
Bootloader: Cyclone Secure Bootloader v2.10, (Dec 5 2009 23:39:04), Type: Signed Production Application
Service Tag: 5C4D26C15D2B6262A19C8D0B243D42A3
Connecting to Cyclone Server
Cyclone Server (1.0.0.591), Cyclone Box Team 2008, 2009, 2010 - Ready.
========= Box Info =========
Box SN: C0000EE1
HW Revision: A, Suitable for: Production, Case: First Plastic Case, MCU Manufacture Time: 2009, wk10 / wk14
Set: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OKSet: Box, TX2 Adapter, 100 Credits, 6 Months Warranty
Box registration status: Registered OK
Paired Card SN: xxxxxxxxxxxx
First Name: xxxxxxxx
Surname: xxxxxxxxx
Nickname:xxxxxxxxxxxxx
Address: xxxxxxxxxxxxx
Country: Portugal
E-Mail: xxxxxxxxxxxxxxxxxxx
Reseller: xxxxxxxxxxxxxxxxxxx
Warranty Start Date: xxxxxxxxxxxxx
Warranty Period (months): xxx
Warranty Stop Date: xxxxxxxxx
Warranty active:xxxxxxxxxxxx
============================
Updating Security Area...
Security Area Update Skipped, Not allowed
Updating Main Firmware...
Main Firmware Update Skipped, Not allowed
Updating Secure Bootloader...
Secure Bootloader Update Skipped, Not allowed or not needed
Disconnected from Cyclone Server
Box Maintenance finished successfully


Aguardo atentamente .