ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Solucion Liberacion Ls993 Sprint
s_lito88
mensaje Mar 13 2018, 02:58 PM
Publicado: #1

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 5
Agradecimientos: 49
Registrado: 20-October 12
Miembro No.: 395,981
Pais:ad


aqui la solucion para liberar el lg ls993 seguridad 1 de enero 2018 zva sin hacer brick

vamos a proceder a descargar estos archivos

1 primer paso instalar uppercut

2 segundo paso instalar lgup install 1.14

3 tercer paso sobre escribir lgup v20dll donde esta instalado uppercut

4 paso abrir lg up

5 paso buscar el kdz h87315c seleccionarlo

6 selecionar particiones


flahear y listo en telefono liberado full dato y full señal



no olviden agradecer

Mensaje modificado por s_lito88 el Mar 13 2018, 03:00 PM
 
Go to the top of the page
 
+Quote Post
A continuacion 8 usuario(s) le Agradece(n) a s_lito88 por su Colaboracion:
browear2, candelaunlock, CuBan0, flipe, kikxt, korea503sv, maxpatri9, merysorivel
Fernando Reyes
mensaje Apr 6 2018, 05:14 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 19
Registrado: 6-March 18
Desde: El Salvador
Miembro No.: 1,029,271
Pais:ad


Bueno… me aventure a hacerlo y lo logre!!! Si funciona y acá les doy los pasos de cómo lo hice...

Se usan los siguientes 4 archivos:
DRIVERS DE LG: LGMobileDriver_WHQL_Ver_4.2.0
LGUP: LGUP_Store_Frame_Ver_1_14_3
PARCHE DE LGUP: LGUP_V20dll_Patched
ROM: H87315c_00_OPEN_CA_OP_1026.kdz

PASOS:
1. Instalamos los drivers de LG
2. Instalamos LGUP
3. Descomprimimos el parche LGUP_V20dll_Patched
4. Dentro del parche que acabamos de descomprimir encontraremos la carpeta “Model” y el archivo “LGUP.exe” los cuales debemos pegarlos en la ruta donde está instalado el programa LGUP y así sustituir los que ahí ya existen.
Generalmente la ruta donde está instalado es la siguiente: C:\Program Files (x86)\LG Electronics\LGUP
(Recomendación: Eliminar primero la carpeta y el archivo existente y luego pegar los nuevos)
5. Poner nuestro LG G6 en modo Download:
-Apagarlo
-Presionar botón de volumen +
-Conectarle cable USB a la PC
6. Abrir “LGUP.exe” (automáticamente reconocerá nuestro dispositivo LG G6)
7. Ya con LGUP abierto en la sección “File Path” elegir el kdz descargado: H87315c_00_OPEN_CA_OP_1026.kdz
8. Marcar la opción “PARTITION DL” y dar click en “Start”
9. A los pocos segundos de iniciado el proceso nos aparecerá una ventana emergente que se llama “Partition List” en la cual marcaremos la casilla de abajo “Select all” y le damos en OK (con esto marcaremos todas las particiones)
10. Luego nos aparecerá la última ventana emergente “LGUP Common” que nos preguntara lo siguiente: Partition(s) changed “Persist”, “System”, “cache”, “OP”, “Userdata”, Do you want continue? Cliqueamos YES
11. Empezara el proceso de Flasheo que se tardara aproximadamente 3 minutos. Esperar a que este proceso termine (A mí eso me demoro y use un puerto USB 3.0)
12. Cuando el proceso termine LGUP nos mostrara debajo de la columna “Step” el siguiente mensaje: “COMPLETE!...Click here to continue” y nuestro LG se reiniciara.
13. Desconectar nuestro LG G6 y listo iniciara Android por primera vez y lo configuraremos como un dispositivo nuevo.

*Nota: Acá un punto importante, en mi caso mi LG G6 al terminar de flashearlo quedo en bootloop, se reinició y se reinició constantemente sin parar.
Por lo que para sacarlo de ese modo es necesario realizarle también un reseteo de fábrica, así que si su dispositivo después de flashearlo pasa más de 15 minutos reiniciándose constantemente sin pasar del logo de LG es porque también quedo en bootloop, pero tiene solución!.

Y es ingresando al “Factory Data Reset” y aplicándole un reseteo de fábrica. Los pasos son los siguientes:

Presionar botón de encendido y bajar volumen al mismo tiempo, esperar a que se reinicie, luego soltar el botón de encendido y presionarlo 2 veces seguidas sin soltar el boton de bajar volumen. De esa forma ingresamos a la pantalla “Factory Data Reset” en la cual elegiremos “SI”.
Esperamos a que el proceso de formateo termine y eso es todo!.
¡Nuestro LG G6 quedara como nuevo, iniciara correctamente, cargara Android y quedara liberado de fábrica para todas las compañías! smile.gif

Ahhh una cosa más, mi LG G6 en Versión de software decía “LS993ZVA” pero en LGUP aparecía como “LS993ZV4”, pero a pesar de eso me funciono el flasheo.
Y si tienen dudas al respecto ya sea con el procedimiento o los archivos necesarios pueden enviarme un MP para poder ayudarles. wink.gif
Go to the top of the page
 
+Quote Post
A continuacion 18 usuario(s) le Agradece(n) a Fernando Reyes por su Colaboracion:
adiel90, albertmex, AxGar28, cold45, eldorey2, flipe, freddy100, freemovil, froyfroy, gsm2200, juannava092, kikxt, kioskodanna, movilGSM, scandaloso19, vamed15, villacellvisur, zorro47
Anunciante Autorizado
mensaje Apr 6 2018, 05:14 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.
Haz Shift+Click si deseas
abrir una nueva ventana
sin abandonar ClanGSM
















Go to the top of the page
 
Quote Post
melvogsm
mensaje Jun 25 2018, 04:44 PM
Publicado: #3

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 383
Agradecimientos: 556
Registrado: 20-December 11
Desde: san salvador
Miembro No.: 287,171
Pais:sv


mi experiencia con este modelo fue la siguiente del soporte de la octopus baje este archivo
LS993zva_to_H87315d_for_unlock.oct
luego procedí a darle flash con la caja se flasho sin problema alguno ni riesgo alguno
aquí están las

Welcome to Octoplus/Octopus Box LG Software version 2.8.6
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM6
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LS993ZV9_05
Android version: 7.0
LAF Version: 1.1
Product ID: PT03S170320001498
IMEI: 3XXXXX-08-XXXXXX-7
Target operator: SPR
Hardware: rev_10
Performed by 2.8.6 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.8.6 Software version.

Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 115.87k ) Número de descargas: 0

Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 108.33k ) Número de descargas: 0

Fichero Adjunto  3.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 179.61k ) Número de descargas: 0

Fichero Adjunto  5.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 46.43k ) Número de descargas: 0


--------------------















CLAN GSM MAS QUE UN FORUM ES UNA HERRAMIENTA MUY IMPORTANTE.[color="#0000FF"][/color]
Go to the top of the page
 
+Quote Post
A continuacion 11 usuario(s) le Agradece(n) a melvogsm por su Colaboracion:
codes unlock, dolores, EL-GUERO, gerardovg167, gsm2200, joseses, kedy17, lEaNsEr, luisn, rafasuktra, Rubso
norman22
mensaje Apr 16 2019, 03:47 AM
Publicado: #4

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,148
Agradecimientos: 523
Registrado: 5-September 08
Desde: HONDURAS, San Pedro Sula
Miembro No.: 5,893
Pais:hn


100% en version ZVF delen sin miedo.

-----------
Platform: LG Qualcomm
Selected port: COM141
Selected model: LS993
Reading info...
IMEI: 355140-08-369961-6
Android version: 8.0.0
Battery level: 56%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914004154
IMEI: 355140-08-36996X-X
Target operator: SPR
Hardware: rev_10
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.9.3 Software version.

Fichero Adjunto  post_589... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 53.85k ) Número de descargas: 0


--------------------
"Las mentes brillantes manejan ideas; las mentes corrientes hablan de actualidades; las mentes mediocres hablan de los demás."
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a norman22 por su Colaboracion:
Alonsorq11, joseses
Tuxblack
mensaje May 20 2019, 04:32 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 195
Agradecimientos: 551
Registrado: 27-December 08
Desde: Aguascalientes, México
Miembro No.: 15,600
Pais:mx


con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Tuxblack por su Colaboracion:
guerreroL7
joseses
mensaje Jun 6 2019, 05:17 PM
Publicado: #6

Miembro del Clan
Icono de Grupo

Grupo: Miembro Clan V.I.P.
Mensajes: 25
Agradecimientos: 128
Registrado: 4-August 09
Miembro No.: 51,792



Alguien ya a probado para la version de software LS993ZVC

con seguridad de 1 de agosto 2018
Go to the top of the page
 
+Quote Post
100%Succefull
mensaje Jun 6 2019, 06:00 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 35
Agradecimientos: 22
Registrado: 21-July 18
Miembro No.: 1,059,158
Pais:do


CITA(Tuxblack @ May 20 2019, 05:32 PM) *
con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)


Funcionan los datos?
Go to the top of the page
 
+Quote Post
CelularCris
mensaje Jun 6 2019, 06:54 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 42
Agradecimientos: 50
Registrado: 2-November 15
Miembro No.: 767,529
Pais:mx


CITA(joseses @ Jun 6 2019, 05:17 PM) *
Alguien ya a probado para la version de software LS993ZVC

con seguridad de 1 de agosto 2018


En el soporte de octopus, hay un firmware para unlock, ahorita estoy haciendo uno.
Fichero(s) Adjunto(s)
 


--------------------
"Unlock World."
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a CelularCris por su Colaboracion:
joseses, markiraheta
CelularCris
mensaje Jun 6 2019, 07:38 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 42
Agradecimientos: 50
Registrado: 2-November 15
Miembro No.: 767,529
Pais:mx


Listo y comprobado

version de software utilizada y degradar sin miedo
LS993zva_to_H87315d_for_unlock

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's
firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.5 Software version.
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

Fichero(s) Adjunto(s)
 


--------------------
"Unlock World."
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a CelularCris por su Colaboracion:
joseses, tresma
tresma
mensaje Jun 6 2019, 07:40 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 17-June 16
Miembro No.: 840,404
Pais:mx


CITA(CelularCris @ Jun 6 2019, 08:38 PM) *
Listo y comprobado

version de software utilizada y degradar sin miedo
LS993zva_to_H87315d_for_unlock

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's
firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.5 Software version.
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.


Que proceso seguiste, podrias explicarlo mas detalladamente por favor?
Go to the top of the page
 
+Quote Post
joseses
mensaje Jun 7 2019, 05:36 PM
Publicado: #11

Miembro del Clan
Icono de Grupo

Grupo: Miembro Clan V.I.P.
Mensajes: 25
Agradecimientos: 128
Registrado: 4-August 09
Miembro No.: 51,792



Para complementar un poco mas el tema, dar gracias a los compañeros que se aventuraron, confirmo que la solucion funciona para la

version de software LS993ZVC con seguridad de 1 de agosto 2018.



Y agrego para el compañero tresma que el proceso que realice fue cargar el firmware del soporte, ser bastante paciente que tarda un poco

ya que inicia colocar el chip de cualquier compañia y listo telefono liberado. No hubo algun proceso extra. Servicio de datos correcto.



Agrego algunos datos extras para darle fortaleza al proceso.


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 622.88k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 662.24k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 661.15k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 714.2k ) Número de descargas: 0


Welcome to Octoplus/Octopus Box LG Software version 2.9.4
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM568
Selected model: LS993
Reading info...
IMEI:
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID:
IMEI:
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.4 Software version.
Go to the top of the page
 
+Quote Post
bryaf
mensaje Jun 7 2019, 05:59 PM
Publicado: #12

Miembro del Clan
*

Grupo: Miembros
Mensajes: 24
Agradecimientos: 25
Registrado: 11-March 12
Desde: Costa Rica
Miembro No.: 316,785



Verificado. Solo carga el soft del soporte.



CITA(CelularCris @ Jun 6 2019, 08:38 PM) *
Listo y comprobado

version de software utilizada y degradar sin miedo
LS993zva_to_H87315d_for_unlock

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's
firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.5 Software version.
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

Go to the top of the page
 
+Quote Post
Baphomet
mensaje Jun 11 2019, 07:57 PM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 47
Agradecimientos: 46
Registrado: 27-February 18
Desde: Mi casa
Miembro No.: 1,027,481
Pais:mx


CITA(melvogsm @ Jun 25 2018, 04:44 PM) *
mi experiencia con este modelo fue la siguiente del soporte de la octopus baje este archivo
LS993zva_to_H87315d_for_unlock.oct
luego procedí a darle flash con la caja se flasho sin problema alguno ni riesgo alguno
aquí están las

Welcome to Octoplus/Octopus Box LG Software version 2.8.6
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM6
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LS993ZV9_05
Android version: 7.0
LAF Version: 1.1
Product ID: PT03S170320001498
IMEI: 3XXXXX-08-XXXXXX-7
Target operator: SPR
Hardware: rev_10
Performed by 2.8.6 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.8.6 Software version.

Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 115.87k ) Número de descargas: 0

Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 108.33k ) Número de descargas: 0

Fichero Adjunto  3.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 179.61k ) Número de descargas: 0

Fichero Adjunto  5.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 46.43k ) Número de descargas: 0


Hola amigo, cargue el software que recomendaste, empezó a cargarlo perfectamente, a la mitad de la carga de System marco "Card error" y ahora que le quiero volver a cargar el sistema en uno de los puertos que habilita me marca esto:

CÓDIGO
Welcome to Octoplus/Octopus Box LG Software version 2.9.4
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM740
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.


y en el otro puerto:

CÓDIGO
Checking data...OK
Platform: LG Qualcomm
Selected port: COM740
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...
Performed by 2.9.4 Software version.



¿Alguna idea porque?
Go to the top of the page
 
+Quote Post
guerreroL7
mensaje Jun 12 2019, 10:50 PM
Publicado: #14

Miembro del Clan
Icono de Grupo

Grupo: Miembro Clan V.I.P.
Mensajes: 19
Agradecimientos: 116
Registrado: 5-November 10
Miembro No.: 148,563



CITA(Tuxblack @ May 20 2019, 04:32 PM) *
con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)



Probado ls993 zv8 conectado en modo download y solo detecto new firmware y funcionan datos
al 100
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
5 usuario(s) está(n) leyendo este tema (4 invitado(s) y 0 usuario(s) anónimo(s))
1 usuarios(s) registrado(s): rokkie

 



Ver Visitas Fecha y Hora actual: 24th June 2019 - 04:40 PM