Aporte Frp Asus Zenfone 4 Max Zc520kl Umt Box Opciones

[jhon32271]

Poner en modo EDL
escoger asus zc520kl
reset frp

Brand : ASUS
Model : ZC520KL
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 195B400B367642F4CF4C418D86A4E5DF32466A4DD10562790AEF7CEE900E2B8E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8917_007.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8917, eMMC, 16 GB
LU Count : 1 [0x01D5A000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : asus ASUS_X00HD [msm8937]
Software : NMF26F.WW_Phone-14.2016.1712.367-20171225, WW_Phone-14.2016.1712.367-20171225 [Mon Dec 25 18:29:19 CST 2017]
Android Ver. : 7.1.1
Patch Level : 2017-12-01
Resetting FRP Lock.......Done
Operation Finished.
UltimateFRP Ver. 0.5