ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Aporte Pin Y Frp Blu Studio Xl2 S0270uu
chinoperez
mensaje Jul 3 2018, 11:42 AM
Publicado: #1

Maestro del Clan
***

Grupo: Miembros
Mensajes: 754
Agradecimientos: 2201
Registrado: 6-May 09
Desde: San Salvador, El Salvador
Miembro No.: 35,730
Pais:sv


este modelo es nuevo acá
hecho con Infinity en segundos...

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 36 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4500017045434148370501411B279D04
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , AECAH
[eMMC] : FLASH_CID : 700100454841434541010537049DC31B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000390000000
[eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB]
DEV RID : 0x62D5844F838159B719BFDEDFCD5BAD79
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:51
Reconnect Power/Cable!


Fichero Adjunto  1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.15mb ) Número de descargas: 0

Fichero Adjunto  2.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.3mb ) Número de descargas: 0


saludos.


--------------------
Se prudente siempre y cuando no puedas, entonces por conveniencia...intenta serlo[font="Arial Black"][/font]
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a chinoperez por su Colaboracion:
gpuellop
Anunciante Autorizado
mensaje Jul 3 2018, 11:42 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
gpuellop
mensaje Jan 31 2019, 02:09 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 4
Registrado: 18-April 14
Desde: cartagena colombia
Miembro No.: 592,722



CITA(chinoperez @ Jul 3 2018, 11:42 AM) *
este modelo es nuevo acá
hecho con Infinity en segundos...

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 36 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4500017045434148370501411B279D04
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , AECAH
[eMMC] : FLASH_CID : 700100454841434541010537049DC31B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000390000000
[eMMC] : FLASH_UCP : 14592 MiB [eMMC 16 GiB]
DEV RID : 0x62D5844F838159B719BFDEDFCD5BAD79
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear FRP ( Google Reset Protection )
Clear Ok!
Clear DIN
Clear Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!

Done!
Elapsed: 00:00:51
Reconnect Power/Cable!
Fichero Adjunto  1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.15mb ) Número de descargas: 0

Fichero Adjunto  2.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.3mb ) Número de descargas: 0


saludos.




sale con NCK crack en 3 segundos

Action : Boot Info.
Selected 0-By CPUM 0-By CPUMT6571_EMMC
Exe version: NCKDongle AndroidMTK 2.5.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM36)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045484143 : 000000000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
IMEI marker was found in nvram
IMEI[1] from NVRAM: ee11e0e76bdfafc
If this phone have OTP IMEI, this is normal.
IMEI[2] from NVRAM: ee11e0e76647af1
If this phone have OTP IMEI, this is normal.
Partition table saved to: Android_MTK\partition_tables\
Wait untill phone will start charging.
All done.
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM36)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045484143 : 000000000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.

Gust Apps
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a gpuellop por su Colaboracion:
aaroncorpo, Juan2630, luisernesto04
edwardpttg
mensaje May 20 2019, 03:49 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 76
Agradecimientos: 222
Registrado: 26-April 16
Desde: Palo Alto, CA
Miembro No.: 822,528
Pais:us


NCK

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM11)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045484143 : 000000000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM17)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a edwardpttg por su Colaboracion:
Juan2630
R@iden
mensaje Dec 24 2020, 02:20 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 25
Agradecimientos: 39
Registrado: 21-June 19
Desde: Cuba
Miembro No.: 1,124,688
Pais:cu


abrir Parche NCK

escoger MT6735

Reset FRP

Conectar el telefono apagado

OK

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM47)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6735M_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (114Gb+16384Mb) KSI 0x454841434541
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 70010045484143 : 000000000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : DA USB VCOM Port (COM48)
Checking data....wait!

FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 17th April 2024 - 10:13 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +