ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Quitar Patron Y Cuenta A J510mn
ESTEBAN98
mensaje Apr 23 2018, 02:20 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 134
Agradecimientos: 376
Registrado: 19-March 18
Desde: GB
Miembro No.: 1,032,655
Pais:mx


ALGO CURIOSO YA QUE ME LLEGO UN J510MN PARA QUITAR BLOQUEO DE PANTALLA Y FRP LO QUE HICE FUE ASI COMO ESTABA EN Z3X SELECCIONE J510UN Y EN MODO DESCARGA LE DI RESET FRP/REACT/EE Y CUANDO PRENDIO PRENDIO SIN NINGUN BLOQUEO BUENO ESTO LO SUBO CON TAL DE QUE LO VEAN ASI NO PIERDEN MUCHO TIEMPO Y LO ASEN MAS RAPIDO


UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Reset FRP/React/EE
Selected model: SM-J510UN
Software version: 31.0

Searching Samsung USB Flash interface... COM595 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.31.0


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a ESTEBAN98 por su Colaboracion:
ajito17, Delmer Lopez, eduardo loayza, fitoguille, VENADOUNLOCKER
Anunciante Autorizado
mensaje Apr 23 2018, 02:20 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
fitoguille
mensaje Jul 10 2018, 04:52 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 22
Agradecimientos: 40
Registrado: 30-October 08
Miembro No.: 10,508



Salió impecable! lo que si tengo que decir que me borró todos los datos, muchas gracias colega

Mensaje modificado por fitoguille el Jul 10 2018, 04:55 PM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a fitoguille por su Colaboracion:
ajito17
david777
mensaje Aug 15 2018, 10:43 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 192
Agradecimientos: 302
Registrado: 15-October 15
Miembro No.: 762,366
Pais:ve


Yo quite Cuenta Samsung con tu Aporte

Operation: Reset FRP/React/EE
Selected model: SM-J510UN
Software version: 31.1

Searching Samsung USB Flash interface... COM4 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.31.1
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 29th March 2024 - 07:56 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +