¡¡Hecho!!
(nota: puede funcionar para diferentes modelos mtk de motorola.)
dejo log:
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM62
Port Name: MediaTek USB Port (COM62)
Path: \\?\usb#vid_0e8d&pid_0003#6&21de05da&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM62)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Wed Jun 2 22:49:30 CDT 2021
Android Ver. : 10
Patch Level : 2021-06-01
Platform : MT6771
Board : lima
Platform : mt6771
Platform : MT6771
Board : lima
Platform : mt6771
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.3]
como lo conectas a brom modo ? lo intente con botones mas y menos y me manda siempre a fastboot
yo lo conecte con boton volumen + y -. primero le das en ejecutar y ya despues lo conectas, tardas mas en conectarlo correctamente que en lo que UMT quita la cuenta! saludos
Potenciado por Invision Power Board
© Invision Power Services