ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
!!!aportazo.... Unlock Redmi 9a Att Mexico, Read Code
onay95
mensaje Jul 15 2021, 07:30 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 87
Agradecimientos: 310
Registrado: 9-April 15
Desde: GB
Miembro No.: 706,217
Pais:cu


hola a todos, para mi todos los xiaomis venian libre de fabrica sin ningun tipo de bloqueo por parte de ningun operador, hasta que me llego uno que vino de mexico de att que pedia codigo. Aqui tienen los pasos para desbloquearlo

Necesario umt pro dongle y nck dongle
1- abrir umt mtk y seleccionen el modelo xiaomi redmi 9a y den en Disable Auth (conecten el telefono con vol arriba y vol abajo) y esperen a que termine, esto lo que hace es deshabilitar temporalente la seguridad
2- sin desconectar el telefono de la pc abran ahora el modulo de mtk de nck y seleccionen By CPU y busquen MT6765 y buscan la pestaña simlock unlock
3- en connection dejen meta mode y van donde dice read info (codes) para leer los codigos o le dan en direct unlock para que lo libere directo
4- si le dan en direct unlock lo libera directamente, si le dan en read codes te lee los codigos y luego le pones una linea y cuando te pida codigo de desbloqueo de red le ponen el codigo calculado y listo
5- cobrar por su trabajo

Log del proceso con UMT -MTK


Operation: Disable Auth
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM21
Port Name: MediaTek USB Port (COM21)
Path: \\?\usb#vid_0e8d&pid_0003#5&1f376113&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
SLA/DAA is disable, do not disconnect phone and
select your model and do desired operation.
[UltimateMTK Ver. 4.2]

Log del proceso con NCK Dongle (Direct Unlock)

This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[131]META Port Detected: MediaTek USB VCOM (Android) (COM131)
USB\VID_0E8D&PID_200E&MI_01\6&3751734D&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P79
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 864748xxxxxxxxxx
Phone imei[2] : 864748xxxxxxxxxx
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.

No olviden dar al boton de agradecer para seguir haciendo aportes

Mensaje modificado por onay95 el Jul 15 2021, 07:35 PM


--------------------
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Jul 15 2021, 07:30 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
JORGE COKENO
mensaje Feb 12 2022, 05:55 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 15
Agradecimientos: 240
Registrado: 5-April 15
Miembro No.: 704,906
Pais:mx


hago el proceso pero en la nck mtk no hace nada
como si no encontrara el dispositivo
sera problema de drivers ?
porque en la umt todo el proceso sale bien
me podrias ayudar?

Mensaje modificado por skyovercloker el Mar 2 2022, 01:32 PM
Motivo de edición: lea el reglamento prohibidas letras mayusculas
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a JORGE COKENO por su Colaboracion:
Jinxxfall
Odin167
mensaje Feb 12 2022, 08:21 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 51
Agradecimientos: 343
Registrado: 16-August 17
Desde: Mexico, CDMX. "La capirucha"
Miembro No.: 979,027
Pais:mx


CITA(JORGE COKENO @ Feb 12 2022, 05:55 PM) *
hago el proceso pero en la nck mtk no hace nada
como si no encontrara el dispositivo
sera problema de drivers ?
porque en la umt todo el proceso sale bien
me podrias ayudar?


Talvez te falta seleccionar modo meta. A mi me lo reconocio a la primera.

Operation: Disable Auth
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM26 [MediaTek USB Port (COM26)]
Device Path: \\?\usb#vid_0e8d&pid_0003#6&1fb58b2f&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: 3566C0973E17902F2FE4D2349038AEA3
Preparing device...
-- Success!
SLA/DAA is disable, do not disconnect phone and
select your model and do desired operation.
[UltimateMTK Ver. 4.8]

Exe version: NCKDongle AndroidMTK 2.7.7
Selected model: 0-By CPU MT6765
Action: Unlock
Detected(26) : MediaTek USB Port (COM26)
USB\VID_0E8D&PID_0003\6&1FB58B2F&0&4
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(26) : MediaTek USB Port (COM26)
[26] \\?\usb#vid_0e8d&pid_0003#6&1fb58b2f&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[23]META Port Detected: MediaTek USB VCOM (Android) (COM23)
USB\VID_0E8D&PID_200E&MI_01\7&378C365B&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P114
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 865606051
Phone imei[2] : 8656060513
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.
Go to the top of the page
 
+Quote Post
crash182
mensaje May 25 2022, 01:57 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 3
Agradecimientos: 5
Registrado: 6-February 10
Miembro No.: 83,617



Si sale, solo que si no lo detecta el segundo paso de NCK lo que yo hice fue desconectarlo cuando entro en metamode y volver a conectar y salio a la primera rolleyes.gif

Mensaje modificado por crash182 el May 25 2022, 01:57 PM
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a crash182 por su Colaboracion:
MEMOSALVATIERRA, SamuelBola, tona12, Trabajo5010.pc1
GALDINI008
mensaje Jun 18 2022, 03:00 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 34
Agradecimientos: 67
Registrado: 13-August 17
Desde: GB
Miembro No.: 978,291
Pais:mx


ph34r.gif ph34r.gif ph34r.gif ph34r.gif saludos colegas desde mexico en mi caso solo abri umt selecione xiaomi 9a modulos xiaomi cambio de imei escriben uno al azar cuando los mande a modo meta desconectan rapido abren nck MT6765 Unlock directo y listo el equipo prende liberado no pide codigo testeado


--------------------
Go to the top of the page
 
+Quote Post
TurboAnimal
mensaje Jul 13 2022, 12:58 PM
Publicado: #6

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,257
Agradecimientos: 822
Registrado: 21-December 09
Desde: Mexico
Miembro No.: 75,252



No hay manera de NO usar la UMT MTK? No tengo esa herramienta. Solo NCK Box. No hay manera de liberar directa o leer codigo solo con NCK?
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a TurboAnimal por su Colaboracion:
Arkndy01
AKUMADANTENES
mensaje Jul 14 2022, 04:18 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 3
Registrado: 22-July 16
Miembro No.: 853,507
Pais:mx


CITA(TurboAnimal @ Jul 13 2022, 01:58 PM) *
No hay manera de NO usar la UMT MTK? No tengo esa herramienta. Solo NCK Box. No hay manera de liberar directa o leer codigo solo con NCK?


puedes usar la unlocktool, en la pestaña mtk y auth bypass, conectar volumen + y - ya que termine continuas en nck
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a AKUMADANTENES por su Colaboracion:
alexander82, Berny, ricardozar
ricardozar
mensaje Jul 27 2022, 06:34 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 132
Agradecimientos: 195
Registrado: 30-December 09
Desde: Guadalajara Mexico
Miembro No.: 76,819
Pais:ad


CITA(AKUMADANTENES @ Jul 14 2022, 04:18 PM) *
puedes usar la unlocktool, en la pestaña mtk y auth bypass, conectar volumen + y - ya que termine continuas en nck


Comprobado tal cual lo dice el compañero con unlock tool y por precaucion lei codigo con nck y listo a cobrar
Go to the top of the page
 
+Quote Post
antraxX
mensaje Aug 21 2022, 04:52 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 99
Agradecimientos: 138
Registrado: 17-October 15
Miembro No.: 763,052
Pais:mx


hacer auht bypss con unlock tool coneccion test point
luego read codes con nck
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a antraxX por su Colaboracion:
estebantosca
loadlyon
mensaje Oct 17 2022, 02:43 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 341
Registrado: 25-March 10
Desde: Queretaro Mexico
Miembro No.: 92,812



SIN TEST POINT NI UNLOCKTOOL

NCK MTK Pasos

1. Seleccionar procesador MT6765 en la pestaña MAIN
2. Make software testpoint
3. Conectar apagado con VOL+ y VOL- (Esperar el proceso, NO DESCONECTAR el teléfono)
4. Read phone info in meta mode
5. IMPORTANTE (Verificar en el teléfono se conecte en META MODE, esto lo hará solo teléfono al darle Read phone)
6. Click en la pestaña SIMLOCK UNLOCK
7. Seleccionar Read INFO (Codes)
*** Nunca desconectar el telefono por que se pieder el testpoint por software.


Action : Skip boot mode auth.
Exe version: NCKDongle AndroidMTK 2.7.9
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(14) : MediaTek USB Port_V1632 (COM14)
[14] \\?\usb#vid_0e8d&pid_0003#6&3ad39a85&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6765 CPU code: 766 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.

Action : Meta Info.
Selected Model: 0-By CPU:MT6765
Exe version: NCKDongle AndroidMTK 2.7.9
Detected(14) : MediaTek USB Port_V1632 (COM14)
USB\VID_0E8D&PID_0003\6&3AD39A85&0&1
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(14) : MediaTek USB Port_V1632 (COM14)
[14] \\?\usb#vid_0e8d&pid_0003#6&3ad39a85&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
Aborted by user.
[0]All done.

Exe version: NCKDongle AndroidMTK 2.7.9
Selected model: 0-By CPU MT6765
Detected(15) : MediaTek USB VCOM (Android) (COM15)
USB\VID_0E8D&PID_200E&MI_01\7&101FA1FA&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P125
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
Meta mode conected ok, start reading phone....
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 86313xxxxxxxxxxxxxx
Phone imei[2] : 86313xxxxxxxxxxxxxx
Getting simlock handle, please wait...

[104]Simlock Info : Sim [1]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************

[104]Simlock Info : Sim [2]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************

[ef30][3ac]Simlock Info : Sim [1]

Block1[N] :Locked Code: 8304121794192559
Block1[NS] :UnLocked Code: 56781234
Block3[SP] :UnLocked [ Code: 11112222
Block3[C] :UnLocked Code: 33334444
Block5[SIM] :UnLocked Code: 55556666
**************************************

[ef30][3ac]Simlock Info : Sim [2]

Block1[N] :UnLocked Code: 12345678
Block1[NS] :UnLocked Code: 56781234
Block3[SP] :UnLocked [ Code: 11112222
Block3[C] :UnLocked Code: 33334444
Block5[SIM] :UnLocked Code: 55556666
**************************************
Error start AP mode.
[0]All done.

Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 11 usuario(s) le Agradece(n) a loadlyon por su Colaboracion:
alexander82, aljelisj, ben5, deydri376, gore, josepuc, LAB_SANTACRUZ, monkee, nrike, rudy sanchez, sixtos
Leyceis
mensaje Nov 8 2022, 11:31 AM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 62
Agradecimientos: 39
Registrado: 14-October 12
Desde: cuba
Miembro No.: 394,093



CITA(loadlyon @ Oct 17 2022, 03:43 PM) *
SIN TEST POINT NI UNLOCKTOOL

NCK MTK Pasos

1. Seleccionar procesador MT6765 en la pestaña MAIN
2. Make software testpoint
3. Conectar apagado con VOL+ y VOL- (Esperar el proceso, NO DESCONECTAR el teléfono)
4. Read phone info in meta mode
5. IMPORTANTE (Verificar en el teléfono se conecte en META MODE, esto lo hará solo teléfono al darle Read phone)
6. Click en la pestaña SIMLOCK UNLOCK
7. Seleccionar Read INFO (Codes)
*** Nunca desconectar el telefono por que se pieder el testpoint por software.
Action : Skip boot mode auth.
Exe version: NCKDongle AndroidMTK 2.7.9
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
Keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(14) : MediaTek USB Port_V1632 (COM14)
[14] \\?\usb#vid_0e8d&pid_0003#6&3ad39a85&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6765 CPU code: 766 Target config: e7
***********************
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization: true
SWJTAG enabled: true
EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: false
Root cert required: false
Memory read authorization: true
Memory write authorization: true
Cmd 0xC8 blocked: true
***********************
Executing exploit, do not disconnect phone
Exploit has been executed successfully.

Action : Meta Info.
Selected Model: 0-By CPU:MT6765
Exe version: NCKDongle AndroidMTK 2.7.9
Detected(14) : MediaTek USB Port_V1632 (COM14)
USB\VID_0E8D&PID_0003\6&3AD39A85&0&1
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(14) : MediaTek USB Port_V1632 (COM14)
[14] \\?\usb#vid_0e8d&pid_0003#6&3ad39a85&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
Aborted by user.
[0]All done.

Exe version: NCKDongle AndroidMTK 2.7.9
Selected model: 0-By CPU MT6765
Detected(15) : MediaTek USB VCOM (Android) (COM15)
USB\VID_0E8D&PID_200E&MI_01\7&101FA1FA&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P125
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
Meta mode conected ok, start reading phone....
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 86313xxxxxxxxxxxxxx
Phone imei[2] : 86313xxxxxxxxxxxxxx
Getting simlock handle, please wait...

[104]Simlock Info : Sim [1]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************

[104]Simlock Info : Sim [2]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************

[ef30][3ac]Simlock Info : Sim [1]

Block1[N] :Locked Code: 8304121794192559
Block1[NS] :UnLocked Code: 56781234
Block3[SP] :UnLocked [ Code: 11112222
Block3[C] :UnLocked Code: 33334444
Block5[SIM] :UnLocked Code: 55556666
**************************************

[ef30][3ac]Simlock Info : Sim [2]

Block1[N] :UnLocked Code: 12345678
Block1[NS] :UnLocked Code: 56781234
Block3[SP] :UnLocked [ Code: 11112222
Block3[C] :UnLocked Code: 33334444
Block5[SIM] :UnLocked Code: 55556666
**************************************
Error start AP mode.
[0]All done.


Esto de leer los codigos siempre te genera los mismos para todos los dispositivos y te da erroe de codigos tienen que darle direct unlock para que salga a la primera con nck despues de haber echo los pasos con unlock tool

Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a Leyceis por su Colaboracion:
celulareselchrist, yarocubacel
tallercell
mensaje Nov 8 2022, 01:24 PM
Publicado: #12

Miembro del Clan
*

Grupo: Miembros
Mensajes: 234
Agradecimientos: 411
Registrado: 6-September 10
Desde: Mexico
Miembro No.: 130,831
Pais:mx


Cuando son AT&T Mx pueden pedir gratis el código en la pagina de AT&T, el requisito es tener un sim de la compañía para que les pueda llegar un código de verificación, pero el código que te da es 100% correcto


--------------------
Mis Activaciones:
Z3X LG y Samsung PRO
Chimera
SamKey
Sim Unlocker Pro
Global Unlocker Pro
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a tallercell por su Colaboracion:
yulian911
Baphomet
mensaje Nov 14 2022, 01:44 PM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 145
Agradecimientos: 222
Registrado: 27-February 18
Desde: Mi casa
Miembro No.: 1,027,481
Pais:mx


CITA(tallercell @ Nov 8 2022, 12:24 PM) *
Cuando son AT&T Mx pueden pedir gratis el código en la pagina de AT&T, el requisito es tener un sim de la compañía para que les pueda llegar un código de verificación, pero el código que te da es 100% correcto


Pero cuando tenga adeudo no te dara el codigo o algunas veces aparece que hay un error en el servidor y no lo da pero si, siempre es bueno checar primero si da el codigo pero este proceso con MTK es bueno en esos casos
Go to the top of the page
 
+Quote Post
maykpsy
mensaje Dec 13 2022, 04:44 PM
Publicado: #14

Miembro del Clan
*

Grupo: Miembros
Mensajes: 13
Agradecimientos: 51
Registrado: 28-December 16
Desde: Ciudad De México
Miembro No.: 909,231
Pais:mx


CITA(onay95 @ Jul 15 2021, 07:30 PM) *
hola a todos, para mi todos los xiaomis venian libre de fabrica sin ningun tipo de bloqueo por parte de ningun operador, hasta que me llego uno que vino de mexico de att que pedia codigo. Aqui tienen los pasos para desbloquearlo

Necesario umt pro dongle y nck dongle
1- abrir umt mtk y seleccionen el modelo xiaomi redmi 9a y den en Disable Auth (conecten el telefono con vol arriba y vol abajo) y esperen a que termine, esto lo que hace es deshabilitar temporalente la seguridad
2- sin desconectar el telefono de la pc abran ahora el modulo de mtk de nck y seleccionen By CPU y busquen MT6765 y buscan la pestaña simlock unlock
3- en connection dejen meta mode y van donde dice read info (codes) para leer los codigos o le dan en direct unlock para que lo libere directo
4- si le dan en direct unlock lo libera directamente, si le dan en read codes te lee los codigos y luego le pones una linea y cuando te pida codigo de desbloqueo de red le ponen el codigo calculado y listo
5- cobrar por su trabajo

Log del proceso con UMT -MTK


Operation: Disable Auth
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM21
Port Name: MediaTek USB Port (COM21)
Path: \\?\usb#vid_0e8d&pid_0003#5&1f376113&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
SLA/DAA is disable, do not disconnect phone and
select your model and do desired operation.
[UltimateMTK Ver. 4.2]

Log del proceso con NCK Dongle (Direct Unlock)

This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[131]META Port Detected: MediaTek USB VCOM (Android) (COM131)
USB\VID_0E8D&PID_200E&MI_01\6&3751734D&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P79
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 864748xxxxxxxxxx
Phone imei[2] : 864748xxxxxxxxxx
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.

No olviden dar al boton de agradecer para seguir haciendo aportes


Al pie de letra rolleyes.gif rolleyes.gif
Cabe mencionar que no es necesaria UMT solo cualquier herramienta que haga Disable Auth y listo.

Waiting for mtk usb device... ok
BootMode : [COM42]
DriverDesc : Dispositivo serie USB
DriverPath : usb\vid_0e8d&pid_0003\5&105948fe&0&2
DriverSRV : usbser
DriverVersion : 10.0.19041.1202
DriverDate : 6-21-2006
DriverCFG : usbser.inf
DriverOEM : Microsoft
Connecting to BootROM......
● Chipset MT6765
● Identifier Helio P35
● Info 8A00_CA00_0000_cervino
● MEID:7B0A890E3DA68415428412AEC7708018
● SecCFG SBC+SLA+SDA
Disabling watchdog..
Disable BRom protection...
BootROM::UsbSendDevCtrl:Begin!
MTK Auth Disable(SLA/DAA) success!
now you can use SP Flash Tool or any MTK Tool
●●● Log file saved to => C:/Users/Mac/Desktop/MTKMETAUtility V63 Update/MTKMETAUtility V63 Update/Logs/2022_12_13_15_26_45.log


Exe version: NCKDongle AndroidMTK 2.8.2
Selected model: 0-By CPU MT6765
Action: Unlock
Detected(42) : Dispositivo serie USB (COM42)
USB\VID_0E8D&PID_0003\5&105948FE&0&2
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(42) : Dispositivo serie USB (COM42)
[42] \\?\usb#vid_0e8d&pid_0003#5&105948fe&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[75]META Port Detected: Dispositivo serie USB (COM75)
USB\VID_0E8D&PID_200E&MI_01\6&9FB19D&0&0001
Start sync target, waiting responce.....
ChipID: MT6765
[MT6765]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6765
[META]SW_VER : MOLY.LR12A.R3.MP.V107.5.P132
[META]HW_VER : LCSH_Q0MP1_MT6762_SP_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 868822xxxxxxxxxx
Phone imei[2] : 868822xxxxxxxxxx
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
Simlock checksum is ok.
Direct unlock done
[0]All done.
Go to the top of the page
 
+Quote Post
irmaac
mensaje Jan 12 2023, 07:53 PM
Publicado: #15

Miembro del Clan
*

Grupo: Miembros
Mensajes: 14
Agradecimientos: 7
Registrado: 28-October 14
Miembro No.: 652,603



En mi caso hice todo el procedimiento tal cual, no me pide código asi que hice en direct unlock, solo agarra telcel pero no movistar ni att, me sale correcto el proceso y no agarra movistar que es lo que quiere usar cliente, que procede ahi? hay alguna opción de poder usarlo? a alguien le ha pasado?
Go to the top of the page
 
+Quote Post
Gmustang79
mensaje Jan 17 2023, 12:58 AM
Publicado: #16

Miembro del Clan
*

Grupo: Miembros
Mensajes: 12
Agradecimientos: 93
Registrado: 3-November 13
Desde: mexico
Miembro No.: 533,489



CITA(irmaac @ Jan 12 2023, 07:53 PM) *
En mi caso hice todo el procedimiento tal cual, no me pide código asi que hice en direct unlock, solo agarra telcel pero no movistar ni att, me sale correcto el proceso y no agarra movistar que es lo que quiere usar cliente, que procede ahi? hay alguna opción de poder usarlo? a alguien le ha pasado?

Estoy en las mismas me llego un equipo Telcel termino el proceso todo queda ok pero no se libera el equipo pudiste solucionarlo ?
Go to the top of the page
 
+Quote Post
mvngo
mensaje Feb 9 2023, 06:04 PM
Publicado: #17

Miembro del Clan
*

Grupo: Miembros
Mensajes: 297
Agradecimientos: 1513
Registrado: 10-August 10
Desde: mexico
Miembro No.: 124,036



CITA(tallercell @ Nov 8 2022, 02:24 PM) *
Cuando son AT&T Mx pueden pedir gratis el código en la pagina de AT&T, el requisito es tener un sim de la compañía para que les pueda llegar un código de verificación, pero el código que te da es 100% correcto

me paso que pedi el codigo en la pagina de att al ingresarlo me marcaba codigo erroneo, intente con unloktool y nck y vuala, el codigo que me proporcionaba la pagina estaba mal en el ulimo digito


--------------------
Z3x
Nck Pro
Sigma Box
Octoplus
Go to the top of the page
 
+Quote Post
darksnees
mensaje Mar 11 2023, 07:42 PM
Publicado: #18

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 10-April 17
Miembro No.: 941,937
Pais:ad


habra alguna manera de hacerlo con hydra tool?
tengo el mismo modelo , hace tiempo lo habia comprado "desbloqueado" y solo toma la red telcel, otro chip/sim no lo acepta , siempre da sin señal.
Go to the top of the page
 
+Quote Post
joseterron
mensaje Apr 27 2023, 06:40 PM
Publicado: #19

Miembro del Clan
*

Grupo: Miembros
Mensajes: 47
Agradecimientos: 55
Registrado: 26-November 12
Desde: veracruz.mexico
Miembro No.: 408,544



CITA(mvngo @ Feb 9 2023, 05:04 PM) *
me paso que pedi el codigo en la pagina de att al ingresarlo me marcaba codigo erroneo, intente con unloktool y nck y vuala, el codigo que me proporcionaba la pagina estaba mal en el ulimo digito



Lo mas seguro es que terminaba en 0 el codigo
En cualquier modelo cuando no te acepte el codigo y el codigo termine en 0
Solo reemplaza el ultimo 0 por algun otro digito aleatorio del 1 - 9
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a joseterron por su Colaboracion:
MASTERCEL2030
desblockleija
mensaje Jul 24 2023, 06:47 PM
Publicado: #20

Miembro del Clan
*

Grupo: Miembros
Mensajes: 224
Agradecimientos: 2001
Registrado: 29-May 10
Desde: Mexico
Miembro No.: 106,609
Pais:mx


CITA(AKUMADANTENES @ Jul 14 2022, 04:18 PM) *
puedes usar la unlocktool, en la pestaña mtk y auth bypass, conectar volumen + y - ya que termine continuas en nck

comprobado con unlocktool el proceso
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 11:24 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +