ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

2 Páginas: V  < 1 2  
Reply to this topicStart new topic
Pequeño Aporte Unlock G930p Binario 6
lolo24
mensaje Sep 21 2018, 01:56 PM
Publicado: #21

Maestro del Clan
***

Grupo: Miembros
Mensajes: 974
Agradecimientos: 2213
Registrado: 22-January 16
Desde: CUBA
Miembro No.: 791,161
Pais:cu


CITA(frodo @ Sep 3 2018, 03:36 PM) *
LEE CON ATENCION BIT 6 NO REV 6 TU BIT ES 4 SI VES TU LOG ESTA SOLUCION ES PARA G930PVPU6BRD2 VEZ ES BIT 6

Frodo, se hace en Bit6, baja a rev 4 el baseband porque le escribes el modem del Comboonation. pero se hace en Binario 6 wink.gif

CITA(arandapit @ Sep 21 2018, 01:42 PM) *
tengo un gran problema

tengo uno que es bit 7

sera que tenga que hacer lo mismo para liberarlo???
tiene oreo instalado

Samkey solo x el momento.
Att.
Luis Manresa


--------------------
Mis Box: SimgaKey PLUS - OctopusBox (Samsung,LG,FrpTool) - UMT + NCK - EFT - GC Pro Key (DEAD) - Infinity Box
- FuriousGold Pack 1,2,3,4,5,6 - Eft PRO - Infinty Box ...ChimeraTOOL


* Use siempre el botón DAR GRACIAS
* Use el buscador antes de Publicar
* Siga las reglas del FORO AQUI
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Sep 21 2018, 01:56 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
Kampe2009
mensaje Sep 24 2018, 01:27 PM
Publicado: #22

Miembro del Clan
*

Grupo: Miembros
Mensajes: 102
Agradecimientos: 86
Registrado: 17-April 09
Desde: Veracruz
Miembro No.: 32,698



CITA(frodo @ Sep 3 2018, 03:36 PM) *
LEE CON ATENCION BIT 6 NO REV 6 TU BIT ES 4 SI VES TU LOG ESTA SOLUCION ES PARA G930PVPU6BRD2 VEZ ES BIT 6

Lee bien amigo, su bin es 6, pero te esta diciendo que degardes el modem con el combination, por eso queda en 4 solo el modem, ve lo demas.


--------------------
Go to the top of the page
 
+Quote Post
arandapit
mensaje Sep 25 2018, 10:21 AM
Publicado: #23

Miembro del Clan
*

Grupo: Miembros
Mensajes: 84
Agradecimientos: 171
Registrado: 22-June 15
Desde: Nicaragua
Miembro No.: 729,180
Pais:ni


con bit 7 me da esto en octoplus

Plataforma: Samsung Android
Puerto seleccionado: COM13
Modelo seleccionado: SM-G930P
Operation: Unlock
Modelo del teléfono detectado: SM-G930P
Fecha de creación del firmware: Mon Aug 27 21:39:34 KST 2018
PDA version: G930PVPS7CRH2
CSC version: G930PSPT7CRH2
Versión del SW: G930PVPU4AQI1
Phone SN: 00000000000
Android version: 8.0.0 (R16NW)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-08-01
Warranty Void: 0
SIM 1 status: card io error
Codename: heroqltespr
Checking Root:
Phone is not Rooted.
Installing service app...
Liberando el teléfono...
Finalizing...
El teléfono ha sido liberado con éxito
To finish the operation, please restart the phone via phone's menu.
WARNING! If 'INVALID SIM' message still remains then Root the phone
and try again!
Performed by 2.7.1.7 Software version.


igual queda sim invalida necesito me ayuden con el root
Go to the top of the page
 
+Quote Post
robertyanta83
mensaje Sep 25 2018, 06:12 PM
Publicado: #24

Miembro del Clan
*

Grupo: Miembros
Mensajes: 59
Agradecimientos: 73
Registrado: 9-September 15
Desde: Cuba
Miembro No.: 752,223
Pais:cu


CITA(arandapit @ Sep 25 2018, 11:21 AM) *
con bit 7 me da esto en octoplus

Plataforma: Samsung Android
Puerto seleccionado: COM13
Modelo seleccionado: SM-G930P
Operation: Unlock
Modelo del teléfono detectado: SM-G930P
Fecha de creación del firmware: Mon Aug 27 21:39:34 KST 2018
PDA version: G930PVPS7CRH2
CSC version: G930PSPT7CRH2
Versión del SW: G930PVPU4AQI1
Phone SN: 00000000000
Android version: 8.0.0 (R16NW)
Sales code: SPR
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-08-01
Warranty Void: 0
SIM 1 status: card io error
Codename: heroqltespr
Checking Root:
Phone is not Rooted.
Installing service app...
Liberando el teléfono...
Finalizing...
El teléfono ha sido liberado con éxito
To finish the operation, please restart the phone via phone's menu.
WARNING! If 'INVALID SIM' message still remains then Root the phone
and try again!
Performed by 2.7.1.7 Software version.
igual queda sim invalida necesito me ayuden con el root


amigo para bit 7 hasta el momento solo SamKEY TMO lo saca, saludos
Go to the top of the page
 
+Quote Post
Katobe
mensaje Oct 10 2018, 07:55 AM
Publicado: #25

Miembro del Clan
*

Grupo: Miembros
Mensajes: 75
Agradecimientos: 75
Registrado: 12-September 18
Miembro No.: 1,069,793
Pais:co


instala la combination binario7 que ya se encuentra en la red unlock yo lo hago con gc pro y luego montas de nuevo el stock firmware del mismo binario
Go to the top of the page
 
+Quote Post
josue9710
mensaje Oct 19 2018, 11:10 AM
Publicado: #26

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 1
Registrado: 25-February 12
Miembro No.: 311,798



Sale bien con el aporte si les da error flashear con este fimware G930PVPU6BRD2 hecho el bit 6


Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a josue9710 por su Colaboracion:
joseantsime
JokkerUCF
mensaje Oct 26 2018, 06:40 PM
Publicado: #27

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 5
Registrado: 5-June 16
Desde: CUBA
Miembro No.: 836,315
Pais:ad


hola amigos mi gran duda es la siguiente tengo un modelo SM-G930P pero con bit 2 pero descarge el firmware con bit 6, mi interrogante es si flasheo el bit 6 pierdo la decodificacion ?????
Go to the top of the page
 
+Quote Post
saidapunki1
mensaje Oct 27 2018, 06:43 PM
Publicado: #28

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 655
Agradecimientos: 1195
Registrado: 25-May 12
Desde: México
Miembro No.: 343,890



Aquí el combination para el bit 7
Fichero(s) Adjunto(s)
 


--------------------
Mis herramientas.
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a saidapunki1 por su Colaboracion:
emilyoliveros, freshcamell, lesther89
bigdaddy1870
mensaje Dec 3 2018, 01:45 PM
Publicado: #29

Miembro del Clan
*

Grupo: Miembros
Mensajes: 21
Agradecimientos: 14
Registrado: 6-October 15
Desde: Mexico
Miembro No.: 759,720
Pais:mx


con octoplus sale full consume 80 creditos sin necesidad de root ni flash de ningún tipo






Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-G930P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G930P
Operation: Unlock
Searching for a phone. Please wait...
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Phone unlocking failed
Performed by 2.7.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G930P
Operation: Unlock
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G930P
Firmware compiled date: Fri May 25 20:16:11 KST 2018
PDA version: G930PVPU6CRE7
CSC version: G930PSPT6CRE7
SW version: G930PVPU6CRE7
Phone SN: 00000000000
Android version: 8.0.0 (R16NW)
Sales code: BST
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-04-01
Warranty Void: 0
SIM 1 status: ready
Codename: heroqltespr
Connecting to modem port...
Found phone on COM29
Reading IMEI...OK
-----------------------------------------------------------------------------------
Connecting to server...OK
Checking smart card...OK
Username:
Authorizing...OK
Checking balance...OK
Checking operation...OK
Your balance:.
-----------------------------------------------------------------------------------
Sending device information...OK
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone
Searching for a phone. Please wait...OK
Initializing...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Rebooting phone
Searching for a phone. Please wait...
Searching for signatures...OK
Sending data to server...OK
Initializing exploit...OK
Preparing phone..OK
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Initializing...OK
Unlocking phone...OK
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.5 Software version.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a bigdaddy1870 por su Colaboracion:
Eliezer Salcido
hackdev185
mensaje Jan 17 2019, 09:17 AM
Publicado: #30

Miembro del Clan
*

Grupo: Miembros
Mensajes: 11
Agradecimientos: 27
Registrado: 22-July 12
Desde: Los Angeles
Miembro No.: 365,721
Pais:ad


CITA(bigdaddy1870 @ Dec 3 2018, 02:45 PM) *
con octoplus sale full consume 80 creditos sin necesidad de root ni flash de ningún tipo
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-G930P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G930P
Operation: Unlock
Searching for a phone. Please wait...
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Phone unlocking failed
Performed by 2.7.5 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G930P
Operation: Unlock
Searching for a phone. Please wait...
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G930P
Firmware compiled date: Fri May 25 20:16:11 KST 2018
PDA version: G930PVPU6CRE7
CSC version: G930PSPT6CRE7
SW version: G930PVPU6CRE7
Phone SN: 00000000000
Android version: 8.0.0 (R16NW)
Sales code: BST
Country: USA
HW platform: msm8996
HW Chip: MSM8996
HW Modem: MSM8996
Security patch level: 2018-04-01
Warranty Void: 0
SIM 1 status: ready
Codename: heroqltespr
Connecting to modem port...
Found phone on COM29
Reading IMEI...OK
-----------------------------------------------------------------------------------
Connecting to server...OK
Checking smart card...OK
Username:
Authorizing...OK
Checking balance...OK
Checking operation...OK
Your balance:.
-----------------------------------------------------------------------------------
Sending device information...OK
Rebooting phone
Searching for a phone. Please wait...OK
Rebooting phone
Searching for a phone. Please wait...OK
Initializing...OK
Rebooting phone in Upload Mode...
Searching for a phone. Please wait...OK
Reading data...OK
Rebooting phone
Searching for a phone. Please wait...
Searching for signatures...OK
Sending data to server...OK
Initializing exploit...OK
Preparing phone..OK
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Initializing...OK
Unlocking phone...OK
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.5 Software version.



me quedo sin señal uno, sabes a que se deba?
Go to the top of the page
 
+Quote Post
servitelce
mensaje Jan 26 2019, 03:10 PM
Publicado: #31

Gran Maestro del Clan
****

Grupo: Miembros
Mensajes: 1,874
Agradecimientos: 3155
Registrado: 25-July 09
Desde: GB
Miembro No.: 50,064
Pais:hn


full con samkey,me dio error al marcar SKIP ERASE,lo desmarque y salio full bit 6

Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 7333F210
Model Name : SM-G930P
Android Version : 7.0
Checking SEC data...OK
PDA Version : G930PVPU6BRD2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[AT:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Rebooting device for NV restore...OK
Searching for SAMSUNG Diagnostic Port...[COM7]...OK
QC SW Rev : MPSS.TH.2.0.c2-00171-M8996FAAAANAZM-1.118789.1.135156.1
Authorizing NV access...OK
Preparing NV restore...[0x41]...OK
Writing NV items...OK
Writing NV Elements...OK
Registering NV items...OK
Saving data to NV storage...[0x09]...OK
Operation successful.

SamKEY Team (2017)


--------------------
Go to the top of the page
 
+Quote Post
sadick89
mensaje Mar 23 2019, 01:08 AM
Publicado: #32

Miembro del Clan
*

Grupo: Miembros
Mensajes: 53
Agradecimientos: 95
Registrado: 8-October 11
Miembro No.: 262,748



Hice todo el proceso con el modem y el root pero al darle Unlock me dice que fue exitoso pero me dice Invalid Sim, ya repetí el proceso como 5 veces, le cargo software y software y sale lo mismo... Es bit 6 de boost mobile
Go to the top of the page
 
+Quote Post
chokii
mensaje May 11 2019, 09:50 AM
Publicado: #33

Miembro del Clan
*

Grupo: Miembros
Mensajes: 59
Agradecimientos: 59
Registrado: 29-January 17
Miembro No.: 920,163
Pais:mx


dale unlock con gc pro amigo queda al 100
Go to the top of the page
 
+Quote Post
danielvp
mensaje Nov 30 2021, 05:03 PM
Publicado: #34

Miembro del Clan
*

Grupo: Miembros
Mensajes: 73
Agradecimientos: 51
Registrado: 12-April 12
Miembro No.: 328,000



g930p unlock bit 6 puse el combination del bit 7 aser unlock con z3x box y luego flash el firmware el bit 8 y queda unlock estas son los firmware que use
coombination vzw fa60 g930pvpu7ari1 y G930PVPS8CRJ2_SPT8CRJ2 y listo yo cale munchas cosas y no pude pero con esto si.
Go to the top of the page
 
+Quote Post

2 Páginas: V  < 1 2
Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 12:12 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +