Hola amigos este post lo hice ayer pero no hice salva de imagen pero tengo el log todo esto es sin escribir combination.
Con Octoplus box.
1. Selecionar modelo A510F.
2. Boton Reset FRP-Reactivation.
3. Boton Via UART (EMMC Memory Chip)
4. Conectar el telefono usando el cable C3300k RJ45 yo lpo hice y me funciono todo esto realizado con Windows 10 64bit.
5. El telefono se reinicia varias veces asi que sin miedo el software te guia cuando hay que conectarlo y desconectarlo.
6. Enjoy.
AQUI EL LOG.
Welcome to Octoplus Box Samsung software version 2.6.9
Platform: Samsung Android
Selected port: COM4
Selected model: SM-A510F
Operation: Reset FRP - UART EMMC
Searching for UART interface..
COM41
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...
OK
Please connect phone to USB cable..
Searching for a phone. Please wait...
OK
Reading data...
Checking operation...
OK
Searching for UART interface..
COM41
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface..
COM41
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..
success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.9 Software version.
sirve para a510f bin 5 tambien probado ok
Potenciado por Invision Power Board
© Invision Power Services