agradecer no cuesta nada.!
1.- realizar f4 con chimera.
2.- pasar el TWRP adjunto y el root de defex preferiblemente.
3.- parchar y cobrar bien.
aca el log:
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G610M
Sales Code: COO
Country Code: Colombia
Timezone: America/Guayaquil
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Tue Dec 31 03:30:29 KST 2019
PDA Version: G610MUBS7CTA1 [january 2020, rev1]
Phone Version: G610MUBS7CTA1 [january 2020, rev1]
CSC Version: G610MCOO7CTA1 [january 2020, rev1]
Product Code: COO
HIDSw Version: G610MUBS7CTA1/G610MCOO7CTA1/G610MUBS7CTA1/G610MUBS7CTA1
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: R58J551JC9Z
Imei: 357713080XXXXX
Unique Number: CAJ033F76462954
Connections: AT,MTP
Battery Status: 3.71V (5%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2020-01-01
Data Encryption State: unencrypted
Preparing...
Checking root access.
The phone is rooted by: 17.3:MAGISKSU (topjohnwu)
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [02.15.20 13:57:45]
WorkID: 89204476
colega, tengo un problema pude realizar todo el procedimiento pero con linea movistar cuando intentas llamar queda en llamando hasta que dice llamada finalizada, ahora si configuro las bandas en solo gsm si llama. alguna solucion?
hola amigos, que firmware usaron para poder realizar la operación. Me dice "modem no soportado"
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM750
Selected model: SM-G610M
Operation: Repair Network
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Repairing network failed.
Performed by 2.9.7.3 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM750
Selected model: SM-G610M
Operation: Repair Network
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G610M
Firmware compiled date: Tue Dec 31 03:30:29 KST 2019
PDA version: G610MUBS7CTA1
CSC version: G610MUUB7CTA1
SW version: G610MUBS7CTA1
Build number: QB14786060
Phone SN: R58K4101PTV
Android version: 8.1.0 (M1AJQ)
Sales code: TTT
Country: TRINIDAD AND TOBAGO
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2020-01-01
Warranty Void: 1
SIM 1 status: absent
Codename: on7xelteub
Checking Root:
Phone is Rooted.
-----------------------------------------------------------------------------------
Connecting to server ..
Username: oct_KfGsVqf
Connect to server successfull.
Checking smart card...
Your balance: 100 credits.
Checking operation...OK
-----------------------------------------------------------------------------------
Repairing network. Please wait, this can take some time...OK
Network is successfully repaired.
Performed by 2.9.7.3 Software version.
yo lo realizo de otra forma.. flashean firmware TTT bit 7
activan depuracion y oem
flashean en AP el archivo root que les dejo
cuando termine de flashear les va a pedir restablecer (no se asusten) tocan restablecer
cuando inicie instalamos magisk 7.5.1 apk desde archivos y el telefono ya estara rooteado
solo queda reparar imei y parchar
despues subo el log
pregunto ya se puede para el bit 8?
REPAIR INSTRUCTIONS:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Fill values what you need to repair.
6. Press 'Repair' button.
7. Press 'Patch Certificate' if you have network problem after repairing.
7. Press 'Reset EFS' if you need to reset it.
Be carefully, do not perform this without necessity. Backup will be created automatically.
Operation: Patch CERT Nov 2019
Selected model: SM-G610M
Software version: 42.7
Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 8.1.0
PDA version: G610MUBS7CTA1
CSC version: G610MUUB7CTA1
Phone version: G610MUBS7CTA1
Product code: SM-G610MZKATPA
CSC country code: PANAMA
CSC sales code: TPA
Phone SN: R58J71MLNCW
IMEI:
HW version: MP 0.100
RF cal date: 20170711
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2020-01-01
Boot Warranty bit: 1
SIM State: READY
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK
Done with Samsung Tool PRO v.42.7
alguno pudo solucionar lo de las llamadas al realizar root probe con varias rom y nada los root con eftsu parche con z3x chimera y octo pero nada
Potenciado por Invision Power Board
© Invision Power Services