Versión para Imprimir
Pulsa aquí para ver este tema en su formato original
Clan GSM - Unión de los Expertos en Telefonía Celular _ Samsung _ Aporte Frp Samsung N920v 7.0
Publicado por: jer1982 el Oct 19 2017, 07:30 PM
me llego un samsung n920v 7.0 N920VVRU3CQB9 y no encontré ninguna solucion con esta versión de android e hice lo siguiente
procedí a degradar el teléfono con el firmware N920VVRS3BQA1_N920VVZW3BQA1_N920VVRS3BQA1_HOME.tar que versión 6.0.1
y luego elegí el modelo N920S en la Z3X le di Reset FRP/Rect/EE
y listo a cobrar
Publicado por: PanchoGT el Nov 3 2017, 08:18 PM
Con el modelo N920T tambien aplica y version de android
Operation: Reset FRP/React/EE
Selected model: SM-N920T
Software version: 29.6
Searching Samsung USB Flash interface... COM37 detected
Configurar conexión ... Listo
Reading PIT from phone... Listo
Searching FRP lock... Listo
Erasing FRP lock... Listo
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data rese
Done with Samsung Tool PRO v.29.6
Publicado por: Dr.Celelular el Nov 3 2017, 11:22 PM
Tengo unos que es B4 y no se puede degradar ,que hago en este caso?
Publicado por: kioskodanna el Nov 17 2017, 11:13 AM
aqui con octoplus sin desgradar
https://www.clangsm.com/forum/index.php?showtopic=484705
Publicado por: leonel1990 el May 22 2018, 11:38 AM
puedes ponerle un eng root con odin ,,cuando encienda con octoplus cojes modelo n920t ile das reset frp via adb y listo https://www.mediafire.com/file/9bhf7c3dy7qj3a9/N920V_ENG_ROOT_B3-7.0+by+pakfirmware.com.zip
Publicado por: ddrcomics el Aug 2 2018, 02:28 PM
con octoplus en modo uart en 30 segundos sale escogiendo el modelo t
Publicado por: reydecel2018 el Aug 18 2018, 09:47 PM
excelente llevaba unas horas batallando y me ha funcionado perfecto
Publicado por: erhickson el Aug 31 2018, 01:08 PM
procedí a degradar el teléfono con el firmware N920VVRS3BQA1_N920VVZW3BQA1_N920VVRS3BQA1_HOME.tar que versión 6.0.1
y luego elegí el modelo N920S en la Z3X le di Reset FRP/Rect/EE
y listo a cobrar
funciono a la perfeccion gracias
Publicado por: yoel504 el Nov 6 2018, 12:20 PM
ME FUNCIONO CON ESTA VERCION
To connect SM-N920T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-N920T
Operation: Reset FRP - ADB
Searching for a phone (waiting for ADB device)...
Reading info...
Detected phone model: SM-N920V
Firmware compiled date: Wed Aug 9 15:19:00 KST 2017
PDA version: N920VVRS3CQH1
CSC version: N920VVZW3CQH1
SW version: N920VVRS3CQH1
Phone SN: RF8H52LH40E
Android version: 7.0 (NRD90M)
Sales code: VZW
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: MDM9635M
Security patch level: 2017-08-01
Warranty Void: 0
SIM 1 status: ready
Codename: nobleltevzw
Resetting FRP lock..
FRP lock is successfully reseted!
Goto "Menu->Settings->Backup and reset" and make "Factory data
reset"
Performed by 2.7.3 Software version.
Publicado por: kedy17 el Nov 13 2018, 09:07 PM
salio con el boot del compañero en android 7
aqui el log
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)
To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.
Operation: Reset FRP
Selected model: SM-N920T
Software version: 33.8
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Phone version: N920VVRS3CRH1
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: RF8H932441Z
IMEI: 990007021775470
HW version: N920V.04
RF cal date: 2016.09.28
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.33.8
Publicado por: laleyenda el Dec 18 2018, 09:27 AM
aqui el log
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)
To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.
Operation: Reset FRP
Selected model: SM-N920T
Software version: 33.8
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Phone version: N920VVRS3CRH1
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: RF8H932441Z
IMEI: 990007021775470
HW version: N920V.04
RF cal date: 2016.09.28
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.33.8
veo en que en el soporte octopus esta
EngROOT_N920T_B4_QC6_7.0.oct
funcionara _
Publicado por: laleyenda el Dec 18 2018, 10:36 AM
procedí a degradar el teléfono con el firmware N920VVRS3BQA1_N920VVZW3BQA1_N920VVRS3BQA1_HOME.tar que versión 6.0.1
y luego elegí el modelo N920S en la Z3X le di Reset FRP/Rect/EE
y listo a cobrar
degrade 6.0.1
File analysis... OK
Total file size: 0x11EE32DC0 (4590 Mb)
Searching USB Flash interface... COM25 detected
Setup connection... OK
Reading PIT from phone... OK
Sending sboot.bin... OK
Sending cm.bin... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending cache.img... OK
Sending modem.bin... OK
Flashing done (time - 00:05:18)
despues con elmodelo n920t
Searching Samsung USB Flash interface... COM25 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
y listo
Done with Samsung Tool PRO v.34.6
Publicado por: eljaker el Dec 21 2018, 11:14 AM
con octoplus por medio de uart escojiendo modelo n920t
Publicado por: jonathantorre el Jan 10 2019, 11:43 AM
Yo tengo uno en la versión 7.0 N920VVRS3CRH1 y estoy tratando de hacerlo con la Octopus Box por medio del cable UART, pero no me está funcionando porque cuando me pide que lo conecte al cable Micro UART con 525K resistor y presione "Vol-" + "Power" por 15-20 segundos, nunca reconoce el teléfono. Sigo las instrucciones, primero lo conecto al USB y después que me pide conectarlo al UART conecto el teléfono al uart y nunca reconoce el teléfono.
Publicado por: jonathantorre el Jan 10 2019, 12:12 PM
Estaba teniendo problema tratando de quitar la cuenta a la version 7 N920VVRS3CRH1. Hasta había intentado el método por UART y nada, el teléfono no conectaba. Pero utilicé este eng root y logré quitar la cuenta por ADB.
Operation: Reset FRP
Selected model: SM-N920T
Selected port: COM3 RIM Virtual Serial Port v2
Software version: 34.6
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Phone version: N920VVRS3CRH1
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R38GA0YXXDA
IMEI: 990005893247495
HW version: N920V.04
RF cal date: 2015.10.26
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.34.6
Publicado por: jojecell el Feb 10 2019, 11:38 AM
Operation: Reset FRP/React/EE
Selected model: SM-N920T
Software version: 29.6
Searching Samsung USB Flash interface... COM37 detected
Configurar conexión ... Listo
Reading PIT from phone... Listo
Searching FRP lock... Listo
Erasing FRP lock... Listo
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data rese
Done with Samsung Tool PRO v.29.6
no funciona este metodo colgue el telefono
Publicado por: angelmayor el May 22 2019, 01:09 PM
procedí a degradar el teléfono con el firmware N920VVRS3BQA1_N920VVZW3BQA1_N920VVRS3BQA1_HOME.tar que versión 6.0.1
y luego elegí el modelo N920S en la Z3X le di Reset FRP/Rect/EE
y listo a cobrar
Cuando cargué el sistema N920VVRS3BQA1 el equipo se colgó, le hice Reset FRP/Rect/EE en modo download aunque el equipo no entrara a menú, después de hacerle el FRP con Z3x el equipo entró, por último le active el Desbloqueo OEM y le hice un reset desde el menú, la final le cargué el sistema N920VVRU3CQB9 con la versión de android 7.0. Listo a cobrar...
Publicado por: aletsin el May 23 2019, 11:28 PM
Con Z3x
una vez que termine, reinicias el telefono en modo manual, y entra sin ningun problema, restauras, la cuenta, y vuelves a cargar firm original sin problemas!!
Operation: Reset FRP
Selected model: SM-N920T
Selected port: COM8 USB Serial Port
Software version: 36.2
You must activate ADB before reset FRP Si
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Versión del telefono: N920VVRS3CRH1
Código del Producto: Not Active
Código de país CSC: USA
Código de Venta CSC: VZW
Phone SN: RF8H80DY39M
IMEI: 990007021654659
HW version: N920V.04
RF cal date: 2016.08.04
Chip name: EXYNOS7420
Módem: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Incorrect model selected. This may damage your phone. Continue? Si
Bypass FRP... Listo
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.36.2
Publicado por: gersi92 el May 29 2019, 09:49 AM
procedí a degradar el teléfono con el firmware N920VVRS3BQA1_N920VVZW3BQA1_N920VVRS3BQA1_HOME.tar que versión 6.0.1
y luego elegí el modelo N920S en la Z3X le di Reset FRP/Rect/EE
y listo a cobrar
funciono al 100%.... luego de que el celular encendio... hice un reseteo nuevamente. y esta como nuevo. gracias
Publicado por: laleyenda el Jan 7 2020, 10:50 AM
Operation: Reset FRP
Selected model: SM-N920T
Selected port: COM3 RIM Virtual Serial Port v2
Software version: 34.6
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Phone version: N920VVRS3CRH1
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R38GA0YXXDA
IMEI: 990005893247495
HW version: N920V.04
RF cal date: 2015.10.26
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.34.6
usar modelo n920t cagar el archico con z3x en pda
va a activar adb con el mismo modelo reset frp y listo probado n920v 7.0 bit 3
aqui el log
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-N920V
Android version: 7.0
PDA version: N920VVRS3CRH1
CSC version: N920VVZW3CRH1
Phone version: N920VVRS3CRH1
Product code: Not Active
CSC country code: USA
CSC sales code: VZW
Phone SN: R38G90PFZRE
IMEI: 990005892414682
HW version: N920V.04
RF cal date: 2018.01.10
Chip name: EXYNOS7420
Modem board: MDM9635M
Security patch: 2018-08-01
Boot Warranty bit: 0
SIM State: ABSENT
Incorrect model selected. This may damage your phone. Continue? Yes
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.38.11
Potenciado por Invision Power Board
© Invision Power Services