Hola a todos,realice una lectura de codigo via server con la nueva actualizacion de z3x, todo el proceso lo hizo exitosamente, pero al colocar la sim de otra compania no me pide codigo de red,me dice que lo realice por la aplicacion device unlock la cual me tira error, alguien me podria ayudar.muchas gracias
Versión del telefono: G950USQU1AQEF
PDA version: G950USQU1AQEF
CSC version: G950UOYN1AQEF
Código de país CSC: USA
Código de Venta CSC: TMB
HW version: REV1.0
Phone SN: R**********
Chip name: MSM8998
Módem: MSM8998
Security patch: 2017-05-01
RF cal date: 2017.03.17
IMEI:
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Searching Ramdump interface... COM73 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... Listo
Waiting for server answer... Listo
Congelar código: 82505824
NET lock: 38390858
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
Para comprobar bloquea el estado: *#7465625#
Tengo uno Tmobile le pase otra rom me pidio el NCK lo puse me dijo correcto y al reiniciar dice sim invalida alguien logro liberarlo?
Amigos los que tienen la aplicacion device unlock salen solo por servidor de pago y bastante costoso.
Solo mediante la APP Device Unlock, no sigan perdiendo dinero y gastando creditos en vano.
espero y les sirva de algo esto que vi en otro forum
y ya lo han echo y hay un video en youtube
How to change carrier:
1. Download Factory Binary, EngBoot, and the G950W firmware.
2. Turn off phone
3. Hold down on Bixby button + power + volume down
4. open Odin v3.12.7
5. add the Factory Binary to the AP section of Odin.
6. Plug your phone into your computer (NEEDS TO BE WINDOWS) with Odin open
7. Make sure your device is connected and recognized by Odin.
8. Click start.
9. One the phone reboots run the ADB command, adb reboot bootloader
10. Open modded Odin and flash the EngBoot
11. Click start
12. Once the phone reboots type the command adb reboot bootloader
13. Put the HOME_CSC of the G950W firmware into the CSC part of Odin (unmodded)
14. Click start
15. Open IME setting on Factory Binary
16. Type in *#243203855#
17. Select XAC
18. Click install
19. Wait for phone to reboot
20. Once it does open terminal and type in adb shell
21. Then type in echo "XXX" > /efs/imei/mps_code.dat
22. Type in exit into adb shell
23. Type in adb reboot bootloader
24. Flash the G950U firmware of your choosing without Userdata. Also make sure to flash the non-home CSC
25. Enjoy your new carrier!
CSC Values (replace on of these with the "XXX" in step 21):
BST Boost
VZW Verizon
ATT ATT
USC US Cellular
ACG C Spire
TMK MetroPCS
VMU Virgin Mobile
TFN Tracfone
XAS Sprint
TMB T-Mobile
XAA Unlocked US
SPR Sprint
CCT Xfinity Mobile
1 solo cn el app como ya q esta en funcionamiento
oh con servidor
2. el problema no es el modem nada de eso
el problema es como leer el cert para poder volber a escribirlo otrabes
Ya se puede hacer con z3x actualizacion 30.2 por servidor consume 10 creditos hasta 1 enero despues serian 16 aqui la prueba
Operation: Unlock
Selected model: SM-G950U
Software version: 30.2
Checking Login and Password... OK
Ballance: 45 crd.
You have 45 credit(s) left. This operation takes 10 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 7.0
Product code: SM-G950UZKATMB
Phone version: G950USQS2BQL1
PDA version: G950USQS2BQL1
CSC version: G950UOYN2BQL1
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone SN: R28J53J1CLX
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2017-12-01
RF cal date: 2017.05.28
IMEI: 355987083438373
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM96 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait...
Start... OK
Initialization... OK
Generate and check client proof... OK
Verify proof by client... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.30.2
Hoal como te va? gracias por compartir esto, te queria preguntar si pusiste leer codigo o desbloquear para el TMOBILE porque los creditos estan 5? o cuando reconoce que es TMOBILE te cobra 10? por el unlock APP, yo tengo la 30.2 y veo unlock (que es con el msl como siempre) o read code by server, que ese te lee el codigo, pero en tu log no leyo el codigo sino que lo trabajo distinto, me podrías contar por favor.
gracias!
g950u de tmb en 8.0 android tiene unlock?
me da "error 3" por z3x y por octoplus "error 1"
Samsung g950u tmobile
unlock TBM via server
This operation takes 10 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-G950U
Android version: 8.0.0
PDA version: G950USQU2CRB9
CSC version: G950UOYN2CRB9
Versión del telefono: G950USQU2CRB9
Código del Producto: SM-G950UZKATMB
Código de país CSC: USA
Código de Venta CSC: TMB
Phone SN: R28K40CLPYH
IMEI: 355987085464211
HW version: REV1.0
RF cal date: 2018.04.04
Chip name: MSM8998
Módem: MSM8998
Security patch: 2018-02-01
Boot Warranty bit: 0
Searching Samsung diag port... detectado COM342
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... Listo
Buscando servidor... Listo
Waiting for server answer... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Reiniciando teléfono ... Listo
Desbloqueo Listo
Done with Samsung Tool PRO v.32.6
Alguien sabe si se puede el G955U BIT 4 TMOBILE CON LOS CREDITOS Z3X?
yo libere uno en bit 2 sin problemas amigos
Checking Login and Password... Listo
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 10 credits.Continue? Si
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-G950U
Android version: 8.0.0
PDA version: G950USQS3CRE2
CSC version: G950UOYN3CRE2
Versión del telefono: G950USQS3CRE2
Código del Producto: SM-G950UZSATMB
Código de país CSC: USA
Código de Venta CSC: TMB
Phone SN: R28J42PB59X
IMEI: 3xxxxxxxxxxxxxxx
HW version: REV1.0
RF cal date: 2017.10.31
Chip name: MSM8998
Módem: MSM8998
Security patch: 2018-05-01
Boot Warranty bit: 0
Searching Samsung diag port... detectado COM141
Leyendo información del teléfono ... Listo
Lectura de datos desde el teléfono ... error (0), skip
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Reiniciando teléfono ... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Rebooting to upload... Listo
Searching Ramdump interface... COM205 detected
Lectura de datos desde el teléfono ... Listo
Calculando... Listo
Buscando servidor... Listo
Waiting for server answer... Listo
Waiting ADB device... Listo
Waiting for device to become ready... Listo
Initialization zTool... Listo
Running zTool, please wait...
Start... Listo
Initialization... Listo
Generate and check client proof... Listo
Verify proof by client... Listo
Lectura de datos desde el teléfono ... Listo
Reiniciando teléfono ... Listo
Desbloqueo Listo
Done with Samsung Tool PRO v.33.2
listo ....................[
alguien ha podido g950u binario 4 , por favor alguien que responda no encuentro nadie que confirme que lo hecho y como. saludos yanjo
lo hize en menos de 1 minuto tal como muestra la imagen,aclaro consume 10 creditos en z3x
Comprobado 100% con z3x box,cobra 10 creditos, solo deben dejar que se instalen los drivers y luego dejar que la box haga la magia.
unlock TMB, Bit 7 funcionando perfecto, solamente consume 6 creditos.
1 minuto
saludos
AMIGOS CON BINARIO 8 TUVE MUCHOS PROBLEMAS PERO LES COMPARTO MI SOLUCION
MODELO G950U T MOBILE
DESPUES DE PROBAR TODAS LAS ROM CON EL RESPECTIVO BINARIO NO TUVE EXITO, POR LO QUE CARGUE LA ROM DE OTRO DE MODELO G950U1
ABRI Z3X CON EL MODELO G950U1 Y CARGUE LA SIGUIENTE ROM G950U1UES8DTJ1_OYM8DTJ1 LA PUEDEN DESCARGAR DE LA BOX
DESPUES LE DI EN UNLOCK SERVER TMB Y ME PIDIO 6 CREDITOS Y OPERACION CORRECTA
UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Unlock TMB via Server
Selected model: SM-G950U1
Selected port: COM6 SAMSUNG Mobile USB Serial Port
Software version: 42.11
Checking Login and Password... OK
Balance: 15 crd.
You have 15 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U1
Android version: 9
PDA version: G950U1UES8DTJ1
CSC version: G950U1OYM8DTJ1
Phone version: G950U1UES8DTJ1
Product code: SM2G950UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: RF8K31D5LZV
IMEI: 353111092108669
HW version: REV1.0
RF cal date: 2018.03.11
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM6
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM13 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.42.11
Binario 8 ya esta saliendo full con Z3X sin problemas y a la primera. 6 creditos.
la version t mobile sale con creditos unicamente (algunos creen que el metodo free por combinacion pero en los t mobile no funciona, yo probe) consume 6 creditos nada más y listo full unlock
Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G950U
Android version: 9
PDA version: G950USQU7DTG2
CSC version: G950UOYN7DTG2
Phone version: G950USQU7DTG2
Product code: SM2G950UZKATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: RF8K31D5WPM
IMEI: **********************
HW version: REV1.0
RF cal date: 2018.03.10
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM143
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting to upload... OK
Searching Ramdump interface... COM36 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Potenciado por Invision Power Board
© Invision Power Services