primero num de copilacion 7 veces, activamos desbloqueo oem y depuracion usb despues tripiamos *#546368#*255# SVC Menu -> Port Check Test Enabled".
Welcome to Octoplus/Octopus Box LG Software version 2.8.8
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM300
Selected model: M255
Reading info...
Model ID: LG-M255
IMEI: 355574-08-341615-1
Android version: 7.0
Battery level: 43%
SW Version: M25510r
Mode: Normal
Firmware compiled date: Apr 17 2017
Firmware compiled time: 03:00:00
Firmware released date: Feb 7 2018
Firmware released time: 14:08:27
SW Version: MPSS.JO.2.0.c1.2-00029-8937_GENNS_PACK-1
IMEI: xxxxxxxxxxxxx
Bluetooth address: 48:60:5F:FA:6F:EF
Wi-Fi MAC address: 48:60:5F:58:66:6E
SPC: 000000
Unlocking...
Reading QCN...
Send SPC...OK
Reading Mobile Property...OK
Reading Feature Mask...OK
Reading Roaming List 0...OK
Reading NV_Numbered Items...OK
Reading NV_Numbered SIM1 Items...OK
Reading NV_Numbered SIM2 Items...OK
Reading NV Items...OK
Reading EFS...OK
Reading Provisioning Items...OK
Reading QCN done!
Backup saved to "M255_355574083416151_24-08-2018_11-20-25.qcn"
Switching to Download mode...OK
Initializing flash...OK
Reading partitions...OK
Detecting writing method...
LAF Error: 80000121.
Trying second method...
Trying third method...OK
Reading security area...OK
Backup saved to "M255_355574083416151_24-08-2018_11-26-09.SEC"
Writing security area...OK
Switching to Normal mode...
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.Failed!
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.
Please perform the following steps:
1. Disconnect cable
2. Put phone into Normal mode manually
3. Press "Ok" button
Trying to enable Diagnostics ports...Failed!
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Diagnostics ports are enbled!
Switching to Serial Port...
Found model LGM255AT* ÿh at port COM300
Send SPC...OK
Writing QCN...
Writing NV_Numbered Items...OK
Writing NV_Numbered SIM1 Items...OK
Writing NV_Numbered SIM2 Items...OK
Writing QCN done!
Phone successfully unlocked!
Rebooting phone...
Performed by 2.8.8 Software version.
LG 2-3G Tool v9.59
supported models: 1568
Not detect phone! Please manual select port or reboot PC!
Reading timeout, check cable
Error Code: ReadInfo,1,1
Elapsed: 3 secs. --> (v9.59)
Mode: Normal
Model: LGM255AT
Build version: Nov 29 201819:59:08May 07 201806:00:00LGM255AT
SW Version: MPSS.JO.2.0.c1.2-00044-8937_GENNS_PACK-1
IMEI: 35557408361868-1
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.59)
Checking phone at COM2279
Detected ID: 0000100C (MSM8909)
SW Version: MPSS.JO.2.0.c1.2-00044-8937_GENNS_PACK-1
Reading ESN... OK
Read SPC...
SPC: 000000
Unlock SPC... OK
Backuping RFNV... OK
Backuping Feature Mask... OK
Backuping NV Item... OK
Backuping NV Item SIM1... OK
Backuping NV Item SIM2... OK
Backuping Provisioning Item Files... OK
Phone mode is NORMAL
Switch to DOWNLOAD mode
Phone detected!
Read security zone...
Laf Protocol: 01000016
Model name: LG-M255
Software verion: M25520d
Android verion: 8.1.0
Target operator: ATT
Target country: US
Chipset: msm8937
IMEI: 355574083618681
Save part1...
Laf cmd error: LAF_CMD_READ fail[LAF_ERROR_UNKNOWN[80000119]].
Elapsed: 277 secs. --> (v9.59)
Alguien sabe como arreglar este error? Creo que es la ultima seguridad.
provado como dice el companero seguridad abril 2019
adjunto proceso de m255 20e android 8.1.0 de atyt sale de una con octoplus, delen sin miedo amigos.
agradecer sin les funciono !!
chimera lo saca solo habilitamos adb en modo desarollador.
Falta decir que hay que poner el equipo en modo mtp (siempre) donde sale arriba las notificaciones. A mi me salía solo carga y no me reconocía el tlefono después me lo reconoció pero me pedía root y cuando lo puse mtp siempre me salió full
Potenciado por Invision Power Board
© Invision Power Services