Con samkey tmo , 10 creditos , soporta bit 9 pero solo la flash de este log
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 3747445A41313098
Model Name : SM-G965U
Android Version : 10
Carrier : TMB
Algorithm : AL-4 (UPL)
Device CodeName : STAR2QLTESQ
ADB Serial Number : 3747445a41313098
AP Version : G965USQS9FUB2
CP Version : G965USQS9FUB2
CSC Version : G965UOYN9FUB2
Android Version : 10
This operation takes 10 credits, Continue? YES
Algorithm : New 2021 SDK
Algorithm : CryptoEngine CipherX V1
MSL Address :
IMEI : 35*****************
Debug Level : 0x4f4c
Setting DEBUG level to HIGH.........OK
Waiting for Reboot...OK
CP Debug Level : 0x55ff
Setting CP DEBUG Mode.........OK
Waiting for Reboot...OK
Setting USB Settings to [diag,acm] automatically...OK
Searching for SAMSUNG Diagnostic Port...[COM211]...OK
QC SW Rev : MPSS.AT.4.0.c2.1-00545-SDM845_GEN_PACK-2
Release : Jan 30 202108:39:40Aug 05 202014:00:00sdm845
Authorizing NV access...[PWD:OK]...[SPC:OK]...OK
Executing RIL applet...OK
Starting RIL applet...OK
Checking CARRIER...OK
Checking DIAG security...[COM211]...OK
Waiting for UPLOAD MODE...[COM11]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Searching for PBKDF2 key...PASS
Sending data to SERVER...OK
Waiting for SERVER response...OK
Waiting for Reboot...OK
Starting RIL applet...OK
Unlocking phone...OK
Operation successful.
PLEASE REBOOT PHONE MANUALLY TO FINISH UNLOCK!
SamKEY Team (2017)
soportado tambien ya con Z3x binario 9 directo unlock SPR consume 10 creditos.
bin 9 ya con z3x 6 creditos
Operation: Unlock TMB via Server
Selected model: SM-G965U
Software version: 43.23
Checking Login and Password... OK
Balance: 26 crd.
You have 26 credit(s) left. This operation takes 6 credits. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G965U
Android version: 10
PDA version: G965USQU9FUE1
CSC version: G965UOYN9FUE1
Phone version: G965USQU9FUE1
Product code: SM-G965UZBATMB
CSC country code: USA
CSC sales code: TMB
Carrier ID: TMB
Phone SN: R28K21YEM3A
IMEI: 35464509
HW version: REV1.1
RF cal date: 2020.08.21
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM281
Reading IMEI... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching Ramdump interface... COM134 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Rebooting phone... OK
Unlock done
Done with Samsung Tool PRO v.43.23
El Bit 9 de T-Mobile sale también con SimUnlocker-Pro...pero solo seguridades de antes de Julio del 2021...la mejor opción es flashear el Firmware G960USQS9FUB2...por lo general da un error de inicio después del flasheo y entra al recovery automáticamente ...hacer un Hard Reset e iniciará normal....ya después unlock con esta herramienta por solo 5 créditos...dejo log:
Connect ADB Device [4x52xxxx457339x] : DONE
Model : SM-G960U
Android Version : 10
Phone Sn : 0000000000
Security Patch : 2021-02-01
IMEI : 35xxxxxxxxxxxxx
AP/CP Version : G960USQS9FUB2/G960USQS9FUB2
CSC : TMB/TMB/TMB
Warranty Void Bit : 0
Checking if Model Supported : OK
Operation : Direct Unlock
User Agreetments : OK
Setting CPDebug Level : OK
Rebooting Phone : OK
Setting Debug High Level : OK
Rebooting Phone : OK
Searching For SAMSUNG Mobile USB Serial Port : DONE
Loading Data From Server : OK
Searching For Samsung Modem Port : DONE
Reading Data From Phone : DONE
Calculate : RETRY..WORKING PLEASE WAIT...
Connect Port COM26 : DONE
Rebooting to Normal Mode : OK
Searching For SAMSUNG Mobile USB Serial Port : DONE
Loading Data From Server : OK
Searching For Samsung Modem Port : DONE
Reading Data From Phone : DONE
Calculate : OK
Connect Port COM26 : DONE
Rebooting to Normal Mode : OK
Loading Data From Server : OK
Unlocking : OK
Network Unlock Successful! :
✷✷PLEASE REBOOT YOUR PHONE!✷✷
Saving Log[Logs/Unlock (2022_7_27 20.58.13).log] : DONE
Elapsed Time : (07:01)
Positivo con simunlocker-pro
Connect ADB Device [305631344a573098] : DONE
Model : SM-G965U
Android Version : 10
Phone Sn : 0000000000
Security Patch : 2021-02-01
IMEI : 3582xxxxxxxx
AP/CP Version : G965USQS9FUB2/G965USQS9FUB2
CSC : TMB/TMB/TMB
Warranty Void Bit : 0
Checking if Model Supported : OK
Operation : Direct Unlock
User Agreetments : OK
Setting CPDebug Level : OK
Rebooting Phone : OK
Setting Debug High Level : OK
Rebooting Phone : OKOK
Searching For SAMSUNG Mobile USB Serial Port : DONE
Loading Data From Server : OK
Searching For Samsung Modem Port : DONE
Reading Data From Phone : DONE
Calculate : OK
Connect Port COM16 : DONE
Rebooting to Normal Mode : OK
Loading Data From Server : OK
Unlocking : OK
Network Unlock Successful! :
✷✷PLEASE REBOOT YOUR PHONE!✷✷
Saving Log[Logs/Unlock (2022_9_20 16.04.59).log] : DONE
Elapsed Time : (05:28)
Colegas, estoy intentando con simunlocker pro pero me da un problema.
Connect ADB Device [45334a5731453498] : DONE
Model : SM-G960U
Android Version : 10
Phone Sn : R58M74MXRHD
Security Patch : 2021-12-01
IMEI : 358192100255283
AP/CP Version : G960USQU9FUL1/G960USQU9FUL1
CSC : SPR/SPR/BST
Warranty Void Bit : 0
Checking if Model Supported : OK
Operation : Direct Unlock
User Agreetments : OK
Searching For SAMSUNG Mobile USB Serial Port : DONE
Reading Data From Phone :
You need to flash Eng Modem
Saving Log[Logs/Unlock (2022_10_4 17.29.44).log] : DONE
Elapsed Time : (00:35)
Tambien me pide lo mismo, "You need to flash Eng Modem" pero con el g965u binario 9. creo es un archivo que se carga con odin pero no lo encuentro, alguien que pueda ayudar ??
Tengo entendido que el archivo que pide es el que se saca del COMBINATION
Lo instalas con el programa de tu preferencia, en mi caso, uso octoplus
y ya te permite liberarlo
Potenciado por Invision Power Board
© Invision Power Services