ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Sp200 11b Quedo Con Rayas En La Pantalla Luego De Flashear Sp20013b_to_x210ulma10d_for_unlock.oct
Emsel
mensaje Jan 12 2019, 10:51 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 59
Agradecimientos: 27
Registrado: 11-August 15
Desde: Cuba
Miembro No.: 744,076
Pais:cu


Hola chicos, al intentar hacer el procedimiento de desbloqueo para este modelo segui estos pasos:

1. Leer la eprom
2. Flashear SP20013b_to_X210ULMA10d_for_unlock.oct del soporte de octoplus
3. Escribir la eprom
4. Hard Reset

Al Flashear SP20013b_to_X210ULMA10d_for_unlock.oct dio error en la particion System, al encender mostro el logo K8+, retire la bateria para colocar en modo download y flashear nuevamente, pero esta vez LA PANTALLA SALIO DAÑADA CON RAYAS, flashee sin errores nuevamente con otroa version de octoplus, se siente que el cel inicia, el tactil funciona, pero sigue con defecto en la imagen raas con colores. A alguien le ha pasado?

12/01/2019 5:54:49 > Welcome to Octoplus/Octopus Box LG Software version 2.9.0
12/01/2019 5:55:57 > --------------------------------------------------------------------------------
12/01/2019 5:55:57 > Checking data...12/01/2019 5:55:57 > OK
12/01/2019 5:55:57 > Platform: LG MTK
12/01/2019 5:55:57 > Selected port: COM1
12/01/2019 5:55:57 > Selected baudrate: 921600
12/01/2019 5:55:57 > Selected model: SP200
12/01/2019 5:55:57 > Selected USB connection type
12/01/2019 5:56:01 > Please, disconnect cable, reconnect battery, connect P999 cable (with 910k resistor)
12/01/2019 5:56:01 > or
12/01/2019 5:56:01 > Reconnect battery, press and hold "Vol+" for 10 seconds and connect Micro USB cable.
12/01/2019 5:56:27 > Phone found at port COM116
12/01/2019 5:56:31 > Mode: Emergency
12/01/2019 5:56:31 > Initializing flash...12/01/2019 5:56:33 > OK
12/01/2019 5:56:34 > Model ID: LG-SP200
12/01/2019 5:56:34 > Platform: mt6750
12/01/2019 5:56:34 > Android version: 7.1.2
12/01/2019 5:56:34 > SW version: SP20011b_00
12/01/2019 5:56:34 > LAF Version: 1.1
12/01/2019 5:56:34 > Product ID: CT69S171212002292
12/01/2019 5:56:34 > IMEI:
12/01/2019 5:56:34 > Target operator: SPR
12/01/2019 5:56:34 > Hardware: rev_10
12/01/2019 5:56:34 > Battery level: 50%
12/01/2019 5:56:34 > Reading partitions...12/01/2019 5:56:34 > OK12/01/2019 5:56:34 > OK
12/01/2019 5:56:36 > Checking security...
12/01/2019 5:56:36 > Read 00380000...
12/01/2019 5:56:36 > Checking security passed!
12/01/2019 5:56:36 > --------------------------------------------------------------------------------
12/01/2019 5:56:36 > IMEI: 351980-09-060836-3
12/01/2019 5:56:36 > MEID: 351980-09-060836
12/01/2019 5:56:36 > Bluetooth address: B4:F7:A1:35:83:1B
12/01/2019 5:56:36 > Wi-Fi MAC address: B4:F7:A1:DE:35:44
12/01/2019 5:56:36 > SPC: 823547
12/01/2019 5:56:36 > --------------------------------------------------------------------------------
12/01/2019 5:56:36 > Reading security area...12/01/2019 5:56:36 > OK
12/01/2019 5:56:36 > Backup saved to "SP200_351980090608363_12-01-2019_17-56-36.EEP"
12/01/2019 5:56:36 > --------------------------------------------------------------------------------
12/01/2019 5:56:36 > Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
12/01/2019 5:56:36 > --------------------------------------------------------------------------------
12/01/2019 5:56:41 > Opening "SP20013b_to_X210ULMA10d_for_unlock.oct"...12/01/2019 5:56:41 > OK
12/01/2019 5:56:41 > Setting options...12/01/2019 5:56:43 > OK
12/01/2019 5:56:43 > Reading partitions...12/01/2019 5:56:43 > OK12/01/2019 5:56:43 > OK
12/01/2019 5:56:43 > Formating USERDATA...12/01/2019 5:56:47 > OK
12/01/2019 5:56:47 > Formating ENCRYPT...12/01/2019 5:56:51 > OK
12/01/2019 5:56:51 > Sending signature...12/01/2019 5:56:52 > OK
12/01/2019 5:56:52 > Writing preloader...12/01/2019 5:56:55 > OK
12/01/2019 5:56:55 > Writing pgpt...12/01/2019 5:56:55 > OK
12/01/2019 5:56:55 > Writing lk...12/01/2019 5:56:56 > OK
12/01/2019 5:56:56 > Writing lk2...12/01/2019 5:56:56 > OK
12/01/2019 5:56:56 > Writing laf...12/01/2019 5:56:58 > OK
12/01/2019 5:56:58 > Writing boot...12/01/2019 5:56:59 > OK
12/01/2019 5:56:59 > Writing recovery...12/01/2019 5:57:01 > OK
12/01/2019 5:57:01 > Writing logo...12/01/2019 5:57:01 > OK
12/01/2019 5:57:01 > Writing lo_bak_go...12/01/2019 5:57:01 > OK
12/01/2019 5:57:01 > Writing secro...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing tee1...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing tee2...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing rct...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing factory...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing efuse...12/01/2019 5:57:02 > OK
12/01/2019 5:57:02 > Writing md1img...12/01/2019 5:57:04 > OK
12/01/2019 5:57:04 > Writing md1dsp...12/01/2019 5:57:04 > OK
12/01/2019 5:57:04 > Writing md1arm7...12/01/2019 5:57:04 > OK
12/01/2019 5:57:04 > Writing md3img...12/01/2019 5:57:05 > OK
12/01/2019 5:57:05 > Writing system...12/01/2019 5:58:59 > Failed!
12/01/2019 5:59:29 > Performed by 2.9.0 Software version.
12/01/2019 5:59:29 > Elapsed Time: 12:03:32

.Necesito ayuda.

Gracias!
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 04:40 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +