G935fd Frp Opciones

[jkar5600]

les dejo estoque hize hoy con un s7 edge FD todo de mi autoria, thanks

PROHIBIDO LINKS EXTERNOS- LEA Y RESPETE EL REGLAMENTO

Flash COMBINATION_FA60_G935FXXU1AQA4_CL7964511_QB12290436_REV00_user_mid_noship.tar.md


When goes on use wondershare mobile portable and connect the phone
wait until recognize the phone, go to app and install kingo.apk
connect to wifi and run kingo, try 2 times and get root
after root use Z3X or octopus and press FRP/React/EE

well the tricky part is if you press the FRP/React/EE button, after the restart, its going to stay un samsung logo, so what i did was WHILE THE Z3X OR OCT IS LOADING, flash the BOOT.TAR FILE and just finish the process on your program, thats it

despues de todo van a download mod y checkean si esta FRP off, y flashean el firm que deseen, en mi caso el mio era uno de egypto, EGY G935FXXU1APD1_G935FOJV1APD1_EGY, lo desacrgan de sam firmwares, thats is, byee

UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' to deactivate Google account activation lock.

To reset Google account activation or Samsung reactivation lock:
1. Power on phone in download mode (turn off phone, press vol.down + home + power).
2. Connect phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)

Operation: Reset FRP/React/EE
Selected model: SM-G935F
Software version: 27.8

Checking local file... Ok
Searching server... Ok
Compare local and server file... OK (up to date)
Searching USB Flash interface... COM6 detected
Setup connection... Ok
Reading data from phone... Ok
Sending data to phone... Ok
Waiting ADB device... Ok
Reading phone info...
Model: SM-G935F
Android version: 6.0.1
Product code: SM-G935FZDUMTZ
Phone version: G935FXXU1APJ1
PDA version: FA60_G935FXXU1AQA4
CSC version:
CSC country code:
CSC sales code:
HW version: MP 0.801
Phone SN: RF8H52VF34Z
Chip name: EXYNOS8890
Modem board: SHANNON335
RF cal date: 20160527
IMEI:
Checking Super user right... true
Erasing FRP... Ok
Rebooting phone... Ok
Reset FRP done

Done with Samsung Tool PRO v.27.8

Mensaje modificado por alexacel el Mar 22 2017, 06:12 PM

Motivo de edición: Prohibido dar y/o pedir links externos, Lea y respete el Reglamento