ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Frp Xiaomi Mi A2 Con Umt
yizelpaola
mensaje Jan 7 2019, 11:49 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 10
Registrado: 13-March 12
Miembro No.: 317,608



Buenos días, hoy quiero aportar esta solución de como quitar cuenta google a un xiaomi mi a2 con umt.

Para empezar abren el modulo qcfire, luego a la ventana de read & tools
en brand seleccionan xiaomi y el modelo mi 6x
hacen el respectivo test point del mi a2
reset frp
Fichero Adjunto  fff.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 40.43k ) Número de descargas: 0

agradecer no cueta nada
Go to the top of the page
 
+Quote Post
A continuacion 9 usuario(s) le Agradece(n) a yizelpaola por su Colaboracion:
Bako01, costa, DANIELDEZA, DelvinBuitrag, faktorinverzo, gore, hugo.aguilar, KAMELOTS, vico1234567
Anunciante Autorizado
mensaje Jan 7 2019, 11:49 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
ospitalth
mensaje Feb 27 2019, 04:38 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 7
Agradecimientos: 9
Registrado: 19-September 18
Miembro No.: 1,071,302
Pais:mx


CITA(yizelpaola @ Jan 7 2019, 11:49 AM) *
Buenos días, hoy quiero aportar esta solución de como quitar cuenta google a un xiaomi mi a2 con umt.

Para empezar abren el modulo qcfire, luego a la ventana de read & tools
en brand seleccionan xiaomi y el modelo mi 6x
hacen el respectivo test point del mi a2
reset frp
Fichero Adjunto  fff.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 40.43k ) Número de descargas: 0

agradecer no cueta nada

podrias subir el log por a mi me marco que no es compatible
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a ospitalth por su Colaboracion:
SystemLeon
jhon32271
mensaje Mar 8 2019, 05:19 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 292
Agradecimientos: 317
Registrado: 8-April 15
Desde: Colombia
Miembro No.: 705,995
Pais:co


no funciona:

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM13)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.0.8.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...Failed
VIP Enabled / Auth Enabled Device!
Error Log : PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiID8+CjxkYXRhPgo8bG9nIHZhbHVlPSJF
lJPUjogT25seSBub3AgYW5kIHNpZyB0YWcgY2FuIGJlIHJlY2V2aWVkIGJlZm9yZSBhdXRoZW50aWNhd
lvbi4iLz4KPC9kYXRhPjw/eG1sIHZlcnNpb249IjEuMCIgZW5jb2Rpbmc9IlVURi04IiA/Pgo8ZGF0YT4KPHJlc3BvbnNlIHZhbHVlPSJOQUsiIC8+CjwvZGF0YT5=
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 3.9
Go to the top of the page
 
+Quote Post
DelvinBuitrag
mensaje May 21 2019, 10:33 AM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 58
Agradecimientos: 182
Registrado: 10-May 13
Desde: Valmore Rodriguez, Estado Zulia.
Miembro No.: 468,998



Device : Xiaomi Mi 6x
Operation : Full Reset EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Mi A2
Software : PKQ1.180904.001.V10.0.7.0.PDIMIXM, V10.0.7.0.PDIMIXM [Fri Mar 22 23:11:44 WIB 2019]
Android Ver. : 9
Patch Level : 2019-03-05
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_Mi A2_PKQ1.180904.001.V10.0.7.0.PDIMIXM_2019-03-05_190521_103143.ueb
Reset EFS (Full)......Done
Operation Finished.
QcFire Ver. 4.1

Funcionó, inclusive seleccioné el modelo MI A2 en la 4.1 y no mandaba el CPU, seleccioné el 6X y paso derecho.
Go to the top of the page
 
+Quote Post
totypunk
mensaje Jun 7 2019, 12:25 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 139
Agradecimientos: 417
Registrado: 5-February 15
Desde: La serena
Miembro No.: 685,499
Pais:cl


CITA(DelvinBuitrag @ May 21 2019, 11:33 AM) *
Device : Xiaomi Mi 6x
Operation : Full Reset EFS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FE47B192EF4D1BA34CB4E879F0C6B771D06D2DE87BF21F65BA3303834E1
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Mi A2
Software : PKQ1.180904.001.V10.0.7.0.PDIMIXM, V10.0.7.0.PDIMIXM [Fri Mar 22 23:11:44 WIB 2019]
Android Ver. : 9
Patch Level : 2019-03-05
Saving EFS Backup.......OK
EFS Backup : EFS_Xiaomi_Mi A2_PKQ1.180904.001.V10.0.7.0.PDIMIXM_2019-03-05_190521_103143.ueb
Reset EFS (Full)......Done
Operation Finished.
QcFire Ver. 4.1

Funcionó, inclusive seleccioné el modelo MI A2 en la 4.1 y no mandaba el CPU, seleccioné el 6X y paso derecho.


Colega ud lo que hizo fue resetar el efs creo que se equivocó de proceso.
Go to the top of the page
 
+Quote Post
oscaredd
mensaje Jun 18 2019, 02:23 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 245
Agradecimientos: 374
Registrado: 24-June 09
Miembro No.: 44,074



mismo error detecting chip error no funciona
Go to the top of the page
 
+Quote Post
jonitrance
mensaje Sep 4 2019, 12:21 PM
Publicado: #7

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 538
Agradecimientos: 1100
Registrado: 27-September 08
Desde: Buenos Aires, Argentina
Miembro No.: 7,498
Pais:ar


CITA(yizelpaola @ Jan 7 2019, 01:49 PM) *
Buenos días, hoy quiero aportar esta solución de como quitar cuenta google a un xiaomi mi a2 con umt.

Para empezar abren el modulo qcfire, luego a la ventana de read & tools
en brand seleccionan xiaomi y el modelo mi 6x
hacen el respectivo test point del mi a2
reset frp

agradecer no cueta nada

Y el "respectivo" testpoint?
Si vas a aportar, que sea completo, de lo contrario no sirve tu aporte.
Y no pidas agradecimiento, eso se gana solo!
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a jonitrance por su Colaboracion:
netomotoneto300
frankerebus
mensaje Oct 9 2020, 04:27 PM
Publicado: #8

Maestro del Clan
***

Grupo: Miembros
Mensajes: 867
Agradecimientos: 2529
Registrado: 8-August 08
Desde: x ahora en Colima Mexico
Miembro No.: 4,675



Salio con su modelo directo
dejo log & imagen de tespoint para referencia.
Device : Xiaomi Mi A2
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Android HS-USB QDLoader 9008 (COM105)
Driver Info : TCL, qcusbser.sys, 6.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1C00800 [8996] 00000000
OPK_DATA : F7337FEflawless
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8996_022]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : MSM8996, eMMC, 128 GB
LU Count : 1 [0x0E8F6000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Mi A2 [jasmine_sprout]
Brand : xiaomi
Prod.Name : jasmine
Software : PKQ1.180904.001.V10.0.18.0.PDIMIXM, V10.0.18.0.PDIMIXM [Wed Dec 11 01:35:31 WIB 2019]
Android Ver. : 9
Patch Level : 2019-12-05
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 5.7
Fichero(s) Adjunto(s)
 


--------------------
live long & prosper
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a frankerebus por su Colaboracion:
KLNitro, linares21
dacollirg
mensaje Nov 3 2020, 11:17 AM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 1
Registrado: 12-January 15
Miembro No.: 676,844



CITA(yizelpaola @ Jan 7 2019, 11:49 AM) *
Buenos días, hoy quiero aportar esta solución de como quitar cuenta google a un xiaomi mi a2 con umt.

Para empezar abren el modulo qcfire, luego a la ventana de read & tools
en brand seleccionan xiaomi y el modelo mi 6x
hacen el respectivo test point del mi a2
reset frp

agradecer no cueta nada


si me salio con el modelo mi 6x intente con el mismo modelo a2 me salio error testeen colegas saludos
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 09:29 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +