Versión para Imprimir

Pulsa aquí para ver este tema en su formato original

Clan GSM - Unión de los Expertos en Telefonía Celular _ UMT Box _ Aporte Reparar Imei F4 Xiaomi Mi A2 Lite Umt Android 10

Publicado por: DrKiller el Nov 21 2021, 05:08 PM

Primero activar puerto DIAG, para ello no hay que rootear, ni acrivar adb, ni oem, ni nada. Simplemente marcar *#*#717717#*#* y ya. Si no te activa haz un hard reset y prueba de nuevo, no se necesita nada mas, ni ser root.

Ya activado abrir umt QcFire y en la pestaña read & tools en security seleccionar repair imei, dar en Yes, y seleccionar el puerto diag.

Escribir ambos imei y dar ok.

Después pedirá entrar en modo EDL y para eso desarmar, apagar, desconectar, y hacer test point. (Adjunto imagen)

Dar en OK, y esperar a que finalice.

Pedirá entrar nuevamente en Diag, hacemos lo mismo con la marcación.

Esperar a que finalice y reiniciar. Listo.

Cualquier duda estoy al tanto para ayudar.

Log:
Operation : Repair IMEI
Searching for Device in FTM Mode...Not Found
Port : COM22 : Qualcomm HS-USB Diagnostics 9091 (COM22)
Compile : May 13 2021 17:53:25
Release : Apr 24 2020 07:00:00
Hw. Ver. : 8953.gen
Software : ----
IMEI : 865477046293076 / 865477046293084
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\8953.gen_----_865477046293076_211121_101442.qcn
Switching to EDL Mode...Failed
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : [daisy_sprout]
Software : QKQ1.191002.002.V11.0.20.0.QDLMIXM, V11.0.20.0.QDLMIXM [Wed Jun 2 13:18:58 WIB 2021]
Android Ver. : 10
Patch Level : 2021-06-01
Saving EFS Backup.......OK
EFS Backup : EFS_QKQ1.191002.002.V11.0.20.0.QDLMIXM_2021-06-01_211121_102011.ueb
Reset EFS (Full).......Done
Port : COM22 : Qualcomm HS-USB Diagnostics 9091 (COM22)
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 7.3

Publicado por: ATUSERA69 el Feb 8 2023, 05:45 PM

CITA(DrKiller @ Nov 21 2021, 04:08 PM) *
Primero activar puerto DIAG, para ello no hay que rootear, ni acrivar adb, ni oem, ni nada. Simplemente marcar *#*#717717#*#* y ya. Si no te activa haz un hard reset y prueba de nuevo, no se necesita nada mas, ni ser root.

Ya activado abrir umt QcFire y en la pestaña read & tools en security seleccionar repair imei, dar en Yes, y seleccionar el puerto diag.

Escribir ambos imei y dar ok.

Después pedirá entrar en modo EDL y para eso desarmar, apagar, desconectar, y hacer test point. (Adjunto imagen)

Dar en OK, y esperar a que finalice.

Pedirá entrar nuevamente en Diag, hacemos lo mismo con la marcación.

Esperar a que finalice y reiniciar. Listo.

Cualquier duda estoy al tanto para ayudar.

Log:
Operation : Repair IMEI
Searching for Device in FTM Mode...Not Found
Port : COM22 : Qualcomm HS-USB Diagnostics 9091 (COM22)
Compile : May 13 2021 17:53:25
Release : Apr 24 2020 07:00:00
Hw. Ver. : 8953.gen
Software : ----
IMEI : 865477046293076 / 865477046293084
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\8953.gen_----_865477046293076_211121_101442.qcn
Switching to EDL Mode...Failed
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 64 GB
LU Count : 1 [0x0747C000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : [daisy_sprout]
Software : QKQ1.191002.002.V11.0.20.0.QDLMIXM, V11.0.20.0.QDLMIXM [Wed Jun 2 13:18:58 WIB 2021]
Android Ver. : 10
Patch Level : 2021-06-01
Saving EFS Backup.......OK
EFS Backup : EFS_QKQ1.191002.002.V11.0.20.0.QDLMIXM_2021-06-01_211121_102011.ueb
Reset EFS (Full).......Done
Port : COM22 : Qualcomm HS-USB Diagnostics 9091 (COM22)
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 7.3

cree que sirva en un redmi note 11

Publicado por: smlo96 el Jun 28 2023, 04:49 PM

CITA(ATUSERA69 @ Feb 8 2023, 05:45 PM) *
cree que sirva en un redmi note 11


no colega con el note 11 va via resistencia, toca cambiar unas resistencia

Potenciado por Invision Power Board
© Invision Power Services