Buenas tardes, está soportado el bit 10 para F4 en el J260M?
Por lo pronto no puedo generar el boot.img parcheado, Magisk da error empaquetando.
Existe dicho archivo, la cuestión es si alguien la pudo rootear/trabajar en ese bit, seguridad Abril20.
Desde ya les agradezco, saludos!
EDIT:
Al día de hoy, 21/04 SI repara bit10
Chimera Mobile Phone Utility version: 24.52.1313 @ 2020-04-21
Repair started
Unable to detect IMEI number and baseband version. It seems that the modem does not work or the network is unavailable/disabled.
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: COL
Country Code: COLOMBIA
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Fri Mar 27 02:03:32 KST 2020
PDA Version: J260MUBSAATC9 [march 2020, rev9]
Phone Version: J260MUBSAATC6
CSC Version: J260MOWMAATD1 [april 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number:
Battery Status: 4.25V (99%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-04-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Current imei: 3
Repaired imei: 3
Successfully finished.
Finished at local time:
WorkID:
Chimera Mobile Phone Utility version: 24.52.1313 @ 2020-04-21
Patch certificate started
Unable to detect IMEI number and baseband version. It seems that the modem does not work or the network is unavailable/disabled.
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: COL
Country Code: COLOMBIA
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Fri Mar 27 02:03:32 KST 2020
PDA Version: J260MUBSAATC9 [march 2020, rev9]
Phone Version: J260MUBSAATC6
CSC Version: J260MOWMAATD1 [april 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number:
Battery Status: 4.25V (100%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-04-01
Preparing...
Checking root access.
The phone is rooted by: c94f9e1c:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time:
WorkID:
Lo pruebo y comento si Chimera realiza el proceso.
Gracias!
Edit 1: Efectivamente con el archivo subido en el mensaje anterior, el equipo con bit10 realiza el proceso de empaquetado.
Edit 2: Al día de la fecha, la versión v24.52.1313 repara y parchea bit10. Tarda unos minutos en tomar señal.
Gracias a youmother por colaborar.
Quiero confirmar que este metodo tambien funciona para BIT 9, yo utilice este firmware "J260MUBS9ATA1", busquen en google y ahi lo encuentran, y le pase el boot de magisk que dejo adjunto, de ahi seguir los pasos que el colega postio. Es importante que recuerden que despues de que pasen el archivo boot hay que hacer factory reset y una vez que encienda hay que conectarlo al wifi para poder activar el desbloqueo OEM, si no hacen eso cuando reinicien el cel se les va a quedar en bootloop.
yo estaba intentado certificar el imei para ese modelo y con el bit 10 y no funciono..
claro en cuanto rotear si se pudo.,pero al reparar el imei me decía módem no soportado.., 😏😏😏
repara el imei pero no me deja parchar
ahora si pude certificar el imei en j2 sm-260m con binario 10..
gracias ustedes amigos, gracias!!
Unable to detect IMEI number.
Model: SM-J260M
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Tue Apr 28 07:14:04 KST 2020
PDA Version: J260MUBSAATD7 [april 2020, rev7]
Phone Version: J260MUBSAATD5 [april 2020, rev5]
CSC Version: J260MOWOAATD1 [april 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28M10FLR6A
Battery Status: 4.22V (94%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-05-01
There is no match between the model name and the firmware name.
Model: SM-J260M Firmware: Magisk-v20.4(20400).zip
Invalid custom flash image.
Finished at local time: [05.26.20 20:54:27]
WorkID: 96236574
me dice asi.
Perdon no entiendo mucho, recien estoy aprendiendo todo esto de software, descargue el magisk y hasta ahi llegue.
intentare seguir mirando tutoriales y aprendiendo. disculpas por la ignorancia.
logre hacer el root con la imagen boot de mi firmware pero ahora me tira error el chimera y no me deja parchar certficado.
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: CTI
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Thu Apr 30 01:54:55 KST 2020
PDA Version: J260MUBSAATD8 [april 2020, rev8]
Phone Version: J260MUBSAATD5 [april 2020, rev5]
CSC Version: J260MOWAAATD1 [april 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28M10FLR6A
Battery Status: 4.25V (100%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-05-01
Preparing...
Checking root access.
The phone is rooted by: 20.4:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Unsupported modem. Install another firmware and try again.
Finished at local time: [05.27.20 14:26:23]
WorkID: 96312794
https://www.clangsm.com/forum/index.php?showtopic=541539
Aquí está él fix utilizado Bro
No es necesario descargar toda la rom
Solo flashea este archivo y bun
De un sólo sale
J260m bit 10 full
proceso exitoso, tambien tuve problema con una version que me trajo el equipo pero luego de ponerle otra de colombia funciono a la primera
Amigos y el unlock con bit A o bit 10 como seria siempre me da error de modem no soportado, alguna ayuda?
Alguien de casualidad le ha podido hacer algo al J260M BIT 11 ??
Chimera Mobile Phone Utility version: 25.13.0748 @ 2020-06-19
Printing phone history
Repair IMEI
19/06/2020
16:55:54
Repair IMEI
19/06/2020
16:54:20
Patch certificate started
Unable to detect IMEI number.
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: PET
Country Code: PERU
Timezone: America/La_Paz
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Wed Apr 1 07:11:08 KST 2020
PDA Version: J260MUBSAATD3 [april 2020, rev3]
Phone Version: J260MUBSAATC6 [march 2020, rev6]
CSC Version: J260MPETAATD1 [april 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R58M91PXX3P
Battery Status: 3.93V (60%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Warranty Bit: 1
Security Patch: 2020-04-01
Preparing...
Checking root access.
The phone is rooted by: 20.4:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [06.19.20 12:57:54]
WorkID: 98398455
Alguien a probado F4 del samsung J260m Bit 11
Todavia no es posible bit 11, chimera deja cambiar el serial pero al parchar pide degradar el modem
un saludo colegas
para los que tengan problema con bit 10 para unlock o para f4 pueden probar esta solución que me a sido satisfactoria en los procesos.
1. reparar con chimera tool
2. flashear modem , ubicar en casilla CP (incluido en el rar)
3. luego flashear root con EFTSU_Flash ( modo download)
en la carpeta vienen varios archivos EFTSU para que prueben según la rom de su equipo, sirven por igual las variantes
4. patch con chimera ( aun no e probado con z3x o con octoplus) si alguien puede confirmar
en el caso de unlock ya verificar segun el caso y confirmar
exitos y saludos
espero sea de gran ayuda colegas
buenas tardes colegas me cuentas mas del proceso? tengo en mis manos uno con bit 10, tienes que root antes de repair o repair luego root para parche? gracias.
hola colegas aca dejo mi aporte
pasa el modem de combinacion para binario 10 para trabajar el patch probado 100% root eftsu herramienta usada chimera
a mi me esta saliendo este error, supongo que es mi Internet nomas?
Operation: Repair
Selected model: SM-J260M
Software version: 40.8
Waiting ADB device... Listo
Leyendo información del teléfono ...
Modelo: SM-J260M
Android version: 8.1.0
PDA version: J260MUBSAATD7
CSC version: J260MOWOAATD2
Versión del telefono: J260MUBSAATD5
Código del Producto: SM-J260MZDAARO
Código de país CSC: Argentina
Código de Venta CSC: ARO
Phone SN: R28K92FPTAE
IMEI: 35182xxxxxxxxx
HW version: MP 0.500
RF cal date: 20180923
Chip name: EXYNOS7570
Módem: SHANNON305
Security patch: 2020-05-01
Boot Warranty bit: 1
SIM State: READY
Initialization zTool... Listo
Running zTool, please wait... Listo
Lectura de datos desde el teléfono ... Listo
Buscando servidor... error
Wrong login/password!
Done with Samsung Tool PRO v.40.8
Buenas tardes alguien hizo el proceso con z3x bit 10 android 8.1.0 ?
si así fuera cual es el proceso.gracias
buenas colegas, F4 para bit 11 ya hay algo?? cuento con chimera,z3x y octoplus pero no quiero mandarmela. Hasta bit 10 hice sin problemas pero bit 11 no encuentro nada como para saber si se puede o no. Gracias de antemano. Saludos
Buenas Aqui otro log de reparacion en bit 10 android 8.1.0 con chimera.
Model: SM-J260M
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Tue Apr 28 07:14:04 KST 2020
PDA Version: J260MUBSAATD7 [april 2020, rev7]
Phone Version: J260MUBSAATC6 [march 2020, rev6]
CSC Version: J260MOWOAATD2 [april 2020, rev2]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28K92FPTAE
Battery Status: 4.00V (64%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-05-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Current imei: 3518241xxxxxxxxxx
Repaired imei: 351824xxxxxxxxx
Successfully finished.
Finished at local time: [08.05.20 19:47:18]
WorkID: 102992099
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Tue Apr 28 07:14:04 KST 2020
PDA Version: J260MUBSAATD7 [april 2020, rev7]
Phone Version: J260MUBSAATC6 [march 2020, rev6]
CSC Version: J260MOWOAATD2 [april 2020, rev2]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28K92FPTAE
Battery Status: 4.03V (66%)
Network Type: GSM
SIM Status: READY
Multisim Config: SS
Warranty Bit: 1
Security Patch: 2020-05-01
Preparing...
Checking root access.
The phone is rooted by: 20.3:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [08.05.20 19:51:15]
WorkID: 102992427
buenas firmware y boot para repara y parchar el samsung j260 bit11
Potenciado por Invision Power Board
© Invision Power Services