Versión para Imprimir

Publicado por: worldfixcelular el Mar 4 2024, 03:18 PM

En el apartado de RESET/ FRP Seleccionamos frp y le damos execute conectamos el teléfono haciendo test point y aunque marque error en el frp queda al 100 sin cuenta google adjunto log.



Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901A00 [SM6375] 0300A401
OPK_DATA : 489DD7DE2DB26F5DBD1CDF921F54B949A93388CEAEE92B0E805882C469B20EC3
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6375_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6375, UFS, 128 GB
LU Count : 6 [0x01D7B800] [0x00000800] [0x00000800] [0x00000800] [0x0004B000] [0x00002800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock...Failed
Using Patch Method... Done
Operation Finished.
QcFire Ver. 9.3