un saludo
ocuparemos samkey tmo version 3.20.2
toma 5 creditos
aunque samkey diga que no esta soportado bin 4 si sale
activamos depuracion
y en samkey seleccionamos Deep SEC Calculate (sino va decir software no soportado)
le damos en Calculate SEC
samkey nos da el MSL
activamos DM ADB
seguimos los pasos normales de samkey
luego write SEC y listo
funciona todo datos y llamadas
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 50E6E01D
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Writing MEID SEC data...[MEID:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Rebooting device for NV restore...OK
Searching for SAMSUNG Diagnostic Port...[COM380]...OK
QC SW Rev : MPSS.TA.2.3.c2-00070-8953_GEN_PACK-1
Authorizing NV access...OK
Preparing NV restore...[0x41]...OK
Writing NV items...OK
Writing NV Elements...OK
Registering NV items...OK
Saving data to NV storage...[0x28]...OK
Operation successful.
espero les funcione
100% probado por mi.
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 60B0E0F9
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Writing MEID SEC data...[MEID:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Rebooting device for NV restore...OK
Searching for SAMSUNG Diagnostic Port...[COM374]...OK
QC SW Rev : MPSS.TA.2.3.c2-00070-8953_GEN_PACK-1
Authorizing NV access...OK
Preparing NV restore...[0x41]...OK
Writing NV items...OK
Writing NV Elements...OK
Registering NV items...OK
Saving data to NV storage...[0x0A]...OK
Operation successful
trabajando al muy bien. (si les da error intenten varias veces)[attachment=297652:20180906_102324.jpg]
confirmado, da algunos erores en el proceso en ambos calculate sec y write sec, pero lo intentas varias veces y sale sin problema
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : A3B006E5
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Writing MEID SEC data...[MEID:OK]...[C1:OK]...[C2:OK]...[C3:OK]...OK
Rebooting device for NV restore...OK
Searching for SAMSUNG Diagnostic Port...[COM187]...OK
QC SW Rev : MPSS.TA.2.3.c2-00070-8953_GEN_PACK-1
Authorizing NV access...OK
Preparing NV restore...[0x41]...OK
Writing NV items...OK
Writing NV Elements...OK
Registering NV items...OK
Saving data to NV storage...[0x10]...OK
Operation successful.
Lanzamiento de Samkey TMO Edition v3.20.4
Qué hay de nuevo :
Desbloqueo S9 (G960U) Sprint / Boost BIT2 se ha mejorado
Se corrigió el destello del modem automático para S9 / S9 + Sprint / Boost (v3.20.4)
Soporte J727P BIT4 deshabilitado (Debe esperar hasta el lanzamiento oficial)
Parece que llego un día tarde para mí, resulta que la nueva version de SamKey TMO v3.20.4 que salió hoy da firmware no soportado en binario 4 aunque marque la casilla Deep SEC Calculate.
algo mas que tienen que saber es que si su knox esta void sera imposible aun mas liberarlo ya que por el momento la seguridad knox no permire el unlock en bit 4 asi que no root el j727p si lo quieren liberar en las proximas actualisaciones de samkey
que mal ... estaba perfecto... lo siento por los que ya no pudieron hacerlo... no se que espera team samkey
agan todo el proceso del nv y luego alterminar pongan el modem del combination bit 4 y ya estara desbloqueado lo que sin RX Y TX en eso es en lo que hay que trabajar que estoy haciendo pruevas
buenas noticias,, samkey ya lo soporta de nuevo, ahora oficial
solo waranty void 0
What's New :
Added support for J727P BIT4 (100% PERMANENT) <KNOX:0 only>
Notice : J727P BIT4 WARRANTY VOID =0x1 (KNOX:1) is NOT supported at the moment !
Hice el proceso con Samkey, un telefono salió al 100 y el otro quedó sin señal..
Samkey ya lo soporta j727p Binary 4.
What's New :
Added support for J727P BIT4 (100% PERMANENT) <KNOX:0 only>
MEID Write process for J727P has been upgraded (v3.20.6)
Calculate SEC algorithm has been upgraded (v3.20.6)
Notice : J727P BIT4 WARRANTY VOID =0x1 (KNOX:1) is NOT supported at the moment !
Hay que activarnos con los nv item de uno ya hecho con samkey, tenia uno pero el cliente se lo llevo.
Algun compañero que quiera compartir la salucion de señal con el foro por favor, ya que habemos muchos con ese problema.
Ak les pondre dos soluciones con las cuales pueden solucionar este problema la primera s las pongo en una imagen esta sale 100 provado por mi
La segunda es mediante la escritura del combination COMBINATION_SPT_FA70_J727PVPU4ARF1_SPTFAC_CL10429084_QB18608896_REV00_user_mid_n
ship_MULTI_CERT.tar.md5 activamos en la calculador *#0808# activamos el DM y escrivimos la seguridad con Samkey nuevamente por favor agradescan plis las imagenes se las pondre enumeradas
Con la primera solucion, me salta un mensaje diciendo: WARNING WARNING WARNING.. THIS WILL ERASE IMEI,CERT & CALIBRATION DATA DO YOU WANT TO CONTINUE???.. Traducido: ADVERTENCIA ADVERTENCIA ADVERTENCIA ... ESTO ERRARÁ LOS DATOS DE IMEI, CERT Y CALIBRACIÓN ¿DESEA CONTINUAR?
Sera seguro proceder??
paquito22
No te lo recomeinedo si no tienes backup de sguridad.
De hecho hice el proceso y al parecer todo se encuentra normal (IMEI, baseband, y todo lo demas), excepto que ahora me dice SIM INVALIDA, pero ya les envie un correo a los de SAMKEY para ver si puedo hacer nuevamente la liberacion atravez de ellos sin costos extras, pero aun no han respondido.
Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : F094AAD5
Model Name : SM-J727P
Android Version : 7.0
Checking SEC data...OK
PDA Version : J727PVPU4ARG2
Warranty VOID : 0
Debug Level : READY
Preparing RIL module....[P1:OK]...OK
Starting RIL applet...[REQ:OK]...OK
Waiting for phone to reboot...OK
Waiting for phone to initialize...OK
Loading RIL applet....[P1:OK]...[SU:NA]...[J7POPLTESPR]...OK
Starting RIL applet...[REQ:OK]...OK
Analysing SEC data...OK
Writing SEC data...[SD1:OK]...[IM:OK]...[C1:OK]...[C2:OK]...[C3:OK]FAIL(11)
ERROR (1092): Timeout waiting for ADB ack!
SamKEY Team (2017)
alguien sabe por que me sale ese error?
Tengo uno en estos momentos(bin4) el cual sin tildar la seccion DEEP SEC CALCULATE me tira error en "leyendo la Ram"
Pero al tildarlo ya no tira error en leyendo la Ram PERO al terminar el log queda solamente en "waiting for server responding"... he quedado buen tiempo esperando pero no pasa de ahi...
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 7E9C9B4A
Model Name : SM-J727P
Android Version : 8.1.0
Carrier : BST
Device CodeName : J7POPLTESPR
Board Type : MSM8953
Hardware : QCOM
Warranty VOID : 0
AP Version : J727PVPU4BRH5
CP Version : J727PVPU4BRH5
Debug Level : READY
CP Debug Level : READY
Preparing RIL module....[P1:OK]...[SH:OK]...[J7POPLTESPR]...OK
Starting RIL applet..[AT:OK]...OK
Reading MODEM security info...
IMEI : 35355908
MSL address : R28J73G18W
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:583016]...OK
Searching for SAMSUNG Diagnostic Port...[COM45]...OK
QC SW Rev : MPSS.TA.2.3.c2-00079-8953_GEN_PACK-1
Initialize result : OK
Authorizing NV access...OK
Reading NV network data...OK
Reading NV Elements...OK
Reading NV config...OK
Reading NV registry...OK
Writing applet to device....OK
Starting UPLOAD MODE...OK
Searching for device in UPLOAD MODE...[COM5]...OK
Preparing to read data...OK
Reading RAM data...[SEC:OK]...OK
Security analyse result : OK
Rebooting device to NORMAL mode...OK
Sending data to SERVER...OK
Waiting for SERVER response..
recomiendan pasar combinacion y hacerle nuevamente a liberacion?.
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : B6xxxxxx
Model Name : SM-J727P
Android Version : 7.0
Carrier : XAS
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM40]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARG2/J727PVPU4ARG2
IMEI : 3557xxxxxxxxxx
S/N : 0000000000
U/N : CQ300B62AD6FAC4
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARG2
Android Version : 7.0
Warranty VOID : 1
SIM State : OK
Debug Level : READY
CP Debug Level : READY
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 355xxxxxxxx
MSL address : R28K416TJC
Certificate Status : VALID (OK)
Bypassing MEID auth...[PW1:NA]...FAIL
alguien sabe de este problema.
ya revise y todo esta asi
final imei certi pass
mipi test success
con chimera sacan bit 4 sin root
solo conectar con adb activo y seguir instrucciones.
para quien le sirva el dato.
entonces aun no hay nada confirmado bien el unlock?
Ultima actualzacion y nada del J727P aun.
10-24-2018, 10:52 PM
What's New :
Added J327P PERMANENT Unlock(BIT3 & BIT4)- Any KNOX
Added support for G960U, G960U1 Virgin Mobile USA (VMU)
Added support for G965U, G965U1 Virgin Mobile USA (VMU)
Added new FREE function : Read SPC/MSL
Notice:
New J327P Permanent Unlock is FREE for phones which already unlocked by SamKEY TMO before.
He hecho unlock perfecto a 10 equipos y doy fe de que Samkey TMO lo hace ocupando 5 créditos por teléfono. Salen a la primera y sin ninguna pérdida de serial.
Sale de Una Solo con leer SPC
Yo lo que hice fue utilizar combination para leer el SPC MSL COMBINATION_SPT_FA70_J727PVPU4ARF1
Despues le pase el J727PVPU4ARG2_SPT4ARG2
ya con esto solo utilice SamKey Tmo y listo unlock
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 58BDD3C1
Model Name : SM-J727P
Android Version : 7.0
Carrier : BST
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM186]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARG2/J727PVPU4ARG2
IMEI : 355743092477435
S/N : 0000000000
U/N : CQ30058BDD3C115
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARG2
Android Version : 7.0
Warranty VOID : 0
SIM State : OK
Debug Level : 0x4f4c
Setting DEBUG level to HIGH.........OK
Waiting for Reboot...OK
CP Debug Level : 0x55ff
Setting CP DEBUG Mode.........OK
Waiting for Reboot...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 355743092477435
MSL address : R28K32TYQ9
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:117643]...OK
Switching to UPLOAD MODE...OK
Algorithm : MSM Crypto Engine
Waiting for UPLOAD MODE...[COM6]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Calculating security data...[SIGN:OK]...OK
Waiting for Reboot...OK
Setting suitable DEBUG level.........OK
Waiting for Reboot...OK
Debug Level : OK
Checking USB Modem...[COM186]...OK
Connecting to DEVICE in DL-Mode...OK [COM6]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Checking RADIO...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading data from phone...OK
Searching for SAMSUNG Diagnostic Port...[COM187]...OK
QC SW Rev : MPSS.TA.2.3.c2-00014-8953_GEN_PACK-1.85362.1.86233.1
Release : Jun 19 201822:51:42Feb 01 2017J727P.028953
Authorizing NV access...[PWD:OK]...[SPC:OK]...OK
Sending data to SERVER...OK
Waiting for SERVER response...OK
Writing SEC data...[PWD:OK]...[SPC:OK]...[MD1:OK]...[MD2:OK]...[0x04]...OK
Checking USB Modem...[COM186]...OK
Connecting to DEVICE in DL-Mode...OK [COM6]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Verifying SimLock status...OK
Operation successful.
con chimera sale de una sin root ni creditos
les ha tocado que si libere pero no de señal¿ el imei esta normal
lo corroboro con chimera sale de una sin creditos
yo tengo problemas para ponerlo en adb ya que no me reconoce el *#0808#. gracias.
Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 990DD6E5
Model Name : SM-J727P
Android Version : 7.0
Carrier : BST
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM47]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARG2/J727PVPU4ARG2
IMEI : 3535590819XXXXX
S/N : 0000000000
U/N : CQ300990DD6E534
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARG2
Android Version : 7.0
Warranty VOID : 1
SIM State : OK
Debug Level : 0x4f4c
Setting DEBUG level to HIGH.........OK
Waiting for Reboot...OK
CP Debug Level : 0x55ff
Setting CP DEBUG Mode.........OK
Waiting for Reboot...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 3535590819XXXXX
MSL address : R28J40ZCJN
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:287158]...OK
Switching to UPLOAD MODE...OK
Algorithm : MSM Crypto Engine
Waiting for UPLOAD MODE...[COM8]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Calculating security data...[SIGN:OK]...OK
Waiting for Reboot...OK
Setting suitable DEBUG level.........OK
Waiting for Reboot...OK
Debug Level : OK
Checking USB Modem...[COM47]...OK
Connecting to DEVICE in DL-Mode...OK [COM8]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Checking RADIO...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading data from phone...OK
Searching for SAMSUNG Diagnostic Port...[COM45]...OK
QC SW Rev : MPSS.TA.2.3.c2-00014-8953_GEN_PACK-1.85362.1.86233.1
Release : Jun 19 201822:51:42Feb 01 2017J727P.028953
Authorizing NV access...[PWD:OK]...[SPC:OK]...OK
Sending data to SERVER...OK
Waiting for SERVER response...OK
Writing SEC data...[PWD:OK]...[SPC:OK]...[MD1:OK]...[MD2:OK]...[0x04]...OK
Checking USB Modem...[COM47]...OK
Connecting to DEVICE in DL-Mode...OK [COM8]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Verifying SimLock status...OK
Operation successful.
ya no tuve necesidad de escribir write sec, quedo liberado de una y la misma samkey te da la instruccion.
probe con chimera y mas bien gaste porque compre licencia de 3 dias y nada que lo libero.
me sorprendio samkey, recomendada. cobren bien.
Colegas, ayuda..
Intento liberar un J727p bit 4 con la ultima versión de Samkey TMO y empieza a trabajar bien todo el proceso pero cuando me aparece "waiting for reboot" no lo encuentra y desconoce el adb, cierro Samkey y la computadora automáticamente me lo reconoce, es como que Samkey bloqueara el adb
tengo este problema con un equipo no se cual sea la solucion alguien me pdria ayudar ? gracias ....
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : 3C7
Model Name : SM-J727P
Android Version : 7.0
Carrier : BST
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM763]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4ARG2/J727PSPT4ARG2/J727PVPU4ARF2/J727PVPU4ARG2
IMEI : 35574
S/N : 0000000000
U/N : CQ3003C7AE01AC4
AP Version : J727PVPU4ARG2
CP Version : J727PVPU4ARF2
Checking USB Modem...[COM763]...OK
ERROR(1045) : DB installation failed!
SamKEY Team (2017)
Con samkeyTMO sale a la primera con 5 creditos android 8.1 no adjunto logs porque cometi error de borrar para ver cuantos creditos consumia.
QUIEN ME PUEDE AYUDAR CON ESTE PROBLEMA, SIEMPRE ME SALE ESTE ERROR
Loading ADB module..OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : D88C9AB1
Model Name : SM-J727P
Android Version : 7.0
Carrier : SPR
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM3]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU3AQJ3/J727PSPT3AQJ3/J727PVPU3AQJ3/J727PVPU3AQJ3
IMEI : 35XXXXXXXXX
S/N : 0000000000
U/N : CQ300D88C9AB1A4
AP Version : J727PVPU3AQJ3
CP Version : J727PVPU3AQJ3
Android Version : 7.0
Warranty VOID : 0
SIM State : OK
Debug Level : READY
CP Debug Level : READY
Loading RIL applet...OK
Starting RIL applet...FAIL
SamKEY Team (2017)
Gracias.
Unlock exitoso, equipo probado en llamada audio perfecto
LOG:
Loading ADB module...OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
ADB Serial Number : B885B4EE
Model Name : SM-J727P
Android Version : 8.1.0
Carrier : XAS
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM122]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-J727P
VER : J727PVPU4BRK4/J727PSPT4BRK4/J727PVPU4BRK4/J727PVPU4BRK4
IMEI : 35574309XXXXX
S/N : 0000000000
U/N : CQ300B885B4EEC4
AP Version : J727PVPU4BRK4
CP Version : J727PVPU4BRK4
Checking USB Modem...[COM122]...OK
Connecting to DEVICE in DL-Mode...OK [COM16]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Android Version : 8.1.0
Warranty VOID : 0
SIM State : OK
Debug Level : 0x4f4c
Setting DEBUG level to HIGH.........OK
Waiting for Reboot...OK
CP Debug Level : 0x55ff
Setting CP DEBUG Mode.........OK
Waiting for Reboot...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading MODEM security info...
IMEI : 35574309282XXXXX
MSL address : R28K345S7F
Certificate Status : VALID (OK)
Bypassing MEID auth...OK
Reading SPC/MSL code...[SPC:278987]...OK
Switching to UPLOAD MODE...OK
Algorithm : MSM Crypto Engine
Waiting for UPLOAD MODE...[COM16]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Calculating security data...[SIGN:OK]...OK
Waiting for Reboot...OK
Setting suitable DEBUG level.........OK
Waiting for Reboot...OK
Debug Level : OK
Checking USB Modem...[COM122]...OK
Connecting to DEVICE in DL-Mode...OK [COM16]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Checking RADIO...OK
Loading RIL applet...OK
Starting RIL applet...OK
Reading data from phone...OK
Searching for SAMSUNG Diagnostic Port...[COM125]...OK
QC SW Rev : MPSS.TA.2.3.c2-00014-8953_GEN_PACK-1.85362.1.86233.1
Release : Jun 19 201822:51:42Feb 01 2017J727P.028953
Authorizing NV access...[PWD:OK]...[SPC:OK]...OK
Sending data to SERVER...OK
Waiting for SERVER response...OK
Writing SEC data...[PWD:OK]...[SPC:OK]...[MD1:OK]...[MD2:OK]...[0x04]...OK
Checking USB Modem...[COM122]...OK
Connecting to DEVICE in DL-Mode...OK [COM16]
Setting up module...OK
Initializing memory...OK
Transmitting data...OK
Restarting DEVICE to AT-Mode...OK
Verifying SimLock status...OK
Operation successful.
SamKEY Team (2017)
Model: SM-J727P
Android version: 8.1.0
PDA version: J727PVPS5BSA3
CSC version: J727PSPT5BSA3
Phone version: J727PVPS5BSA3
Product code: Not Active
CSC country code: USA
CSC sales code: BST
Phone SN: 00000000000
IMEI: 355743092472626
HW version: J727P.02
RF cal date: 2018.03.20
Chip name: MSM8953
Modem board: MSM8953
Security patch: 2019-02-01
tengo este en binario 5 y no encuentro maneras de hacerlo. alguien sabe como ??
Como el compañero eljaker comenta, solo poner stock rom y con chimera direct unlock, no gasta créditos, no hace falta root y si necesitan leer el spc ahí mismo con chimera sale.
Alguien puede facilitarme combinación binario 5. Se me quedo el imeo a ceros. Por cargarle un modem..
Quiero activar el MSL pero el smartphone solo me dice no registrado en la red al marcar ##3424# ?
A mi samkey tmo sólo me quito los 5 creditos y no lo liberó tuve que hacerlo con octopus.
Correcto, chimera lo saca de una vez, tarda pero lo saca, en mi caso me pregunto si le cambiaba el modem por uno mas nuevo y accedi, a los minutos lo libero, pero al ponerlo a cargar me aparece que la temperatura de la bateria es muy alta, a alguien mas le ha dado este error?
Potenciado por Invision Power Board
© Invision Power Services