Versión para Imprimir

OCTOPLUS FRP
LG X520HM
RESET FRP
consume 100 creditos

Con Infinity MTK opcion X-FIREFLY sale en 30 segundos presionando volumen subir y bajar mientras esta apagado y conectar USB

Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.32

Load IDBase v1121431 Ok!

UserName and/or Password not set! Can't continue!

Load IDBase v1121431 Ok!

Operation : Reset Settings/Format FS [ v2.32 ]

Mode : FRP [ RESET PROTECTION ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : LGE Mobile USB Serial Port (COM66)
MODE : PRELOADER PORT
PORT : 66
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
AGENT : 0_base : X_FireFly | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : Reset Interface!
PTFN : MediaTek USB Port_V1632 (COM14)
MODE : BOOTROM
PORT : 14
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 91BA15A6C4889954A31D95F2BD748923
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 00E8CA4BAE9BF35B6DD240D4B5717A1823AA4C3C8B022757FB64D8CF61FEF99F
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : FF : Look for EMI
BROM : FF : EMI found!
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : X_FireFly | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_muse6765_64_eh35_q.bin
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: CID : 150100445636444D42037617D0C4186D
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445636444D42
EMMC: VEN : SAMSUNG : DV6DMB
EMMC: SNN : 1981272260 ( 0x7617D0C4) , MF : 1/2021

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x01000000 [ 16.00 MB ]
USER : 0x1D1EC00000 [ 116.48 GB ]

CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 6918DD4F95EB3756D43940612A6BDA75

DA : USB : HIGH-SPEED

Boot done!

Format Ok : RESET PROTECTION

Done!
Elapsed: 00:00:27

Reconnect Power/Cable!

Con Infinity MTK opcion X-FIREFLY sale en 30 segundos presionando volumen subir y bajar mientras esta apagado y conectar USB

que modulo se usa?

OCTOPLUS FRP
LG X520HM
RESET FRP
consume 100 creditos

Welcome to Octoplus/Octopus Box LG Software version 3.2.0
Card S/N :
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 00000000018E9B0D
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 0
Selected model: X520HM
Connecting to phone...
Power OFF phone, press and hold "Vol+" for 10 seconds and connect
USB cable.
Phone found at port COM14
Mode: Emergency
Initializing flash...OK
Model ID: LM-X520HM
Platform: mt6765
Code name: mmh4p
Android version: 9
SW version: LMX520HMAT-00-V10c-SCA-XXX-AUG-28-2019+0
LAF Version: 1.1
Product ID: 96AGAN68B7BY01DDU
-------------------------------------------------------------------------
IMEI: xxx
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username:
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 41 credits.
To perform "Reset FRP" operation you need to have 20 credits.
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Removing write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Restore write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Resetting FRP lock successfully completed!
Performed by 3.2.0 Software version.

yo lo hice con unlocktool k52
sale full en modo brom