Elige "Memory Test" en SPFLASH Tool
MIcloud:
Offset: 0x47000000
Length: 0x3000000
FRP:
Offset: 0x3bd88000
Length: 0x100000
Suerte..!
Saludos, amigo, esta info ya la haz testeado tu? como al final colocas Suerte!
Frp y remove cuenta mi redmi 9c semipermanente umt box
1- remover blindaje y desconectar
2- abrir Ultimate multi tool, pestaña mtk 4.4
3- conectar batería y presionar vol +y - y conectar cable USB
4- ojo no actualizar
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM27
Port Name: MediaTek USB Port (COM27)
Path: \\?\usb#vid_0e8d&pid_0003#5&3746211c&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k65v1_64_bsp_211127_105246.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM27)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
Con UMT sale sin problemas.
Brand : Xiaomi
Model : Redmi 9C
Operation : Reset Mi Account
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3 [MediaTek USB Port_V1632 (COM3)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&3b0d2cff&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: DA871923E79C4EE05B9C4A1DEA625E76
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_221016_155309.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM3)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Resetting Mi Account...
- Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]
Que tal colegas, Global Unlocker lo saca rápido, solo cuesta 4 créditos, apagan el cel y conectan con botones de volumen + y - presionados, aquí el log:
Remove Mi Account
- Check Environment : USB Driver [01/22/2016,3.2]
- Platform : Windows 10 (Version 10.0, Build 22000, 64-bit Edition)
# Power Off Then Connect
# Some Devices Need To Press Volume Down
- Wait For MTK Device : MediaTek USB Port (COM6)
- Connecting : OK
- Chip Info : 0766:8A00:CA00:0000[MT6765]
- Chip Name : (HELIO P35-CERVINO)
- Connect Brom : OK
- Disable BROM Sec : OK
- BROM SEC : [SBC] [SLA] [DAA]
- EMI Info : MTK_BLOADER_INFO_V35
- Connect DA : OK
- MEID : CBB9EFC22A95B1BA4517E57BB93F6A50
- Storage Size : 58.27GB
- Read Info :
- Manufacturer :XIAOMI
- Device Name :REDMI 9C NFC
- Model :M2006C3MNG
- System Name :ANGELICAN_EEA
- Incremental :V12.5.3.0.RCSEUOR
- Android Version :11OK
- Check Model Info : OK
- This Operation Will Take 4 Credits
- Connect To Server : OK
- Read Account Info : OK
- Disable DM-Virty : OK
- Remove MI Account : OK
- Reboot : OK
# Elapsed Time [00:09]
UMT sin problemas
tambien me cayo un Redmi 9C NFC que no salía FRP ni por Octoplus, Chimera, UMT MTK1 y MTK2, ni Unlocktool, pero mirando y mirando econtre que Unlocktool te daba la opción Sideload, aqui lo ilustro y me salié
Tener en cuenta que el unlocktool por BROM me daba un error que me mandaba a hacer un EMI Factory Reset pero este movil no tiene ese testpoint para hacerlo. la seguridad 2022-07-01
Hi! Muchas gracias por su apoyo. Mire, tengo uno de esto con el pache 2022 que cada vez yo le di unlock con unlock se da un error como si fuera el pin de carga que lleva menos o mas coriente. Por favor, cual sera la mejor forma de desbloquearlo y cual caja me aconsejo?
Potenciado por Invision Power Board
© Invision Power Services