Versión para Imprimir

Pulsa aquí para ver este tema en su formato original

Clan GSM - Unión de los Expertos en Telefonía Celular _ ChimeraTool - Soporte Oficial en Español _ A305g U6 Señal-aporte

Publicado por: stewarts39 el Oct 19 2020, 02:10 PM

amigos acabo de hacer este modelo a30 y salio , solo demora 2min salir señal ok
pacht de octubre 2020
-------------------------------------------------------------------------------------------------------------

Chimera Mobile Phone Utility version: 26.36.1122 @ 2020-10-19
Printing phone history

Patch Certificate
19/10/2020
06:56
p.m.

Repair IMEI
19/10/2020
06:14
p.m.

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A305G
Carrier ID: PET
Sales Code: PET
Country Code: PERU
Timezone: America/Lima
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Thu Jul 2 02:33:34 KST 2020
PDA Version: A305GUBS6BTG1 [july 2020, rev1]
Phone Version: A305GDXS6BTFA [june 2020, revA]
CSC Version: A305GOWA6BTF1 [june 2020, rev1]
Board Platform: UNIVERSAL7904
Modem Platform: SHANNON327
Serial Number: R28M800G1KH
Imei: 358392059864178
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-07-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
The phone must be started in recovery mode to be rooted!
To start recovery, you must use a key combo at startup. Usually [volume_up + power] or [volume_up + bixby + power].
Without root the patchcert will not work!
Restarting phone in recovery mode...
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [10.19.20 13:58:34]
WorkID: 111903265


rolleyes.gif rolleyes.gif rolleyes.gif rolleyes.gif rolleyes.gif

 

Publicado por: freddy041996 el Oct 19 2020, 05:52 PM

amigo disculpa ami no me deja reparar el serial

Chimera Mobile Phone Utility version: 26.36.1122 @ 2020-10-19
Printing phone history

Repair IMEI
19/10/2020
8:34
p. m.

Repair IMEI
19/10/2020
8:33
p. m.

Repair IMEI
19/10/2020
8:32
p. m.

Repair IMEI
19/10/2020
8:27
p. m.

Repair IMEI
19/10/2020
8:25
p. m.

Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A305G
Carrier ID: COM
Sales Code: ALE
Country Code: ECUADOR
Timezone: America/Bogota
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Thu Jul 2 02:33:34 KST 2020
PDA Version: A305GUBS6BTG1 [july 2020, rev1]
Phone Version: A305GDXS6BTFA [june 2020, revA]
CSC Version: A305GOWE6BTG1 [july 2020, rev1]
Board Platform: UNIVERSAL7904
Modem Platform: SHANNON327
Serial Number: R28M601BLFF
Imei: 354821100126367
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-07-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Unsupported modem. Install another firmware and try again.
Finished at local time: [10.19.20 17:38:20]
WorkID: 111930253

Publicado por: maxi2019 el Oct 19 2020, 06:35 PM

lo hiciste con algun firmware preroot ? porque a mi solo me levanta señal si lo inicias en modo root

Publicado por: maurote el Oct 19 2020, 06:40 PM

CITA(maxi2019 @ Oct 19 2020, 08:35 PM) *
lo hiciste con algun firmware preroot ? porque a mi solo me levanta señal si lo inicias en modo root

Tengo el mismo problema en un N975F.
No queda otra que cerrar sesión en la cuenta Samsung (si la tiene) y explicarle al cliente que si lo apaga/reinicia, luego tiene que ir a Acerca del teléfono -> Restablecer.


Capaz alguien tiene otro método

Publicado por: maxi2019 el Oct 19 2020, 06:54 PM

CITA(maurote @ Oct 19 2020, 06:40 PM) *
Tengo el mismo problema en un N975F.
No queda otra que cerrar sesión en la cuenta Samsung (si la tiene) y explicarle al cliente que si lo apaga/reinicia, luego tiene que ir a Acerca del teléfono -> Restablecer.
Capaz alguien tiene otro método

hice lo que decis y es verdad funciona voy a probar con un firmware preroot y les informo

Potenciado por Invision Power Board
© Invision Power Services