Probado en Android 11
Abrir UMT QC Fire
Pestaña Read & Tools
Seleccionar Samsung y Modelo A115AZ
FRP y conectar con el test point
Device : Samsung Galaxy A11 (SM-A115AZ)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM158)
Driver Info : Network Connect, qcusbser.sys, 2.0.8.4
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : B760FFE029F9CC9659D0B718BB14D9263721242DD5BB36081C3E418AAFC32A50
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_045]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : RP1A.200720.012.A115AUCU5BUG3, A115AUCU5BUG3 [Wed Jul 28 18:17:08 KST 2021]
Android Ver. : 11
Patch Level : 2021-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 7.3
tambien sale con chimera a115az android 11 bit4
hola disculpen tengo un samsung a11AZ con cuenta google pasa que uso unloock tooll pero me pide un archivo loader me pueden decir como lo puedo sacar me da error
ERASE FRP Selected Model : Samsung Galaxy A11
Code Name : A115F | A115U | A115AZ
Operation : Erase FRP [1]
Authenticating... OK
Retrieving data... OK [233.2 KiB]
Initializing data... OK
Searching for HS-USB QDLoader 9008... COM18
Connection : USB 2.0 High-Speed
USB Driver : [Qualcomm Incorporated] qcusbser - Version : 2.1.2.7
Connecting to device... OK
Handshaking... FAIL
[Sahara] Reading Hello - Failed to handshake with device PBL!
Trying to connect to FIREHOSE Mode!
Connecting to flash programmer... FAIL
Waiting for response timeout!
UNLOCKTOOL 2022.04.19.0
Elapsed time : 22 seconds
Es correcto, así como indica el compañero autor del post, uniendo los dos puntos de la flecha.
Device : Samsung Galaxy A11 (SM-A115A)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM97)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : B760FFE029F9CC9659D0B718BB14D9263721242DD5BB36081C3E418AAFC32A50
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953_045]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8953, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Software : RP1A.200720.012.A115AUCU5BUG3, A115AUCU5BUG3 [Wed Jul 28 18:17:08 KST 2021]
Android Ver. : 11
Patch Level : 2021-08-01
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 8.8
como no encontre nada por eso adjunto evidencia samsung a115az por mas que intente con unlocktool no salio y con nck modulo qualcomm de una salio sin ni un problema saludos conectar por test point y es todo
con cable edl y sin destapar sale
Potenciado por Invision Power Board
© Invision Power Services