ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Aporte: Unlock Directo Lg Ls676 De Bost Mobile Con Lgtool
macjacksm
mensaje Dec 23 2016, 05:20 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 28
Agradecimientos: 17
Registrado: 5-June 11
Desde: Morelia Mexico
Miembro No.: 217,575



Espero les sirva, aunque no encontre nada, si hago spam favor de borrar.
Para hacerlo solo seleccionan en lgtool el modelo LS980, activan depuración y seleccionan solo carga en el teléfono,dan en conectar, abren la pestaña flash/dump y dan unlock, configuran manualmente tipo de banda (gsm) y programan apn de manera normal y a cobrar!

en caso de no detectar el telefono seleccionan el LS696 y siguen las instrucciones para acivar el puerto DIAG ##3424# el SPC se los cuando le dan conectar.

Adjunto capturas y log para que no haya dudas.

P.D. si te sirve no olvides agradecer.

Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.73mb ) Número de descargas: 0
Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.25mb ) Número de descargas: 0


To connect the phone you should select "Charge only" in
Apps\Settings\Connectivity and reconnect the cable
If the phone doesnt load into normal mode due to a corruption
you can launch it in download mode manually:
To switch to Download Mode you should disconnect cable
and power off the phone. Then push and hold
VolumeUp button and while holding
them connect the cable to the phone

Connecting with LS980
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Version: LS676ZV3
Connected
Receiving phone info
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Released: 00:00:00
Firmware Compiled: 16:17:14
Connect mode: Normal
Firmware Version: LS676ZV3
SPC: 093373
MEID: 35878407155xxx
Mobile ESN: 804722xx
SSD_A: 0000000000000000
SSD_B: 0000000000000000
OTKSL: 197681
User Lock Code: 5646
Info received
Unlocking phone
Installing apn launcher
Apn launcher installed. You can edit apns with this program
Checking Emergency Mode...
Mode: Normal
Switching to Emergency Mode...
Mode: Emergency
Checking connect in LAF-Emergency Mode...
Checking...
Checking connect in LAF-Emergency Mode: OK
Initializing connection
making apn list
Unlocking...
Unlocking done
Dumping security zone
Unlocking carrier
Unlocking carrier done
Resetting to normal mode
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Phone successfully unlocked
Don't forget to restart the phone
Disconnected


--------------------
[/size][size="5"][color="#0000FF"][/color][font="Arial Black"][/font]
Gracias Jesus Por las horas extras........
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a macjacksm por su Colaboracion:
boster27, mike1082
Anunciante Autorizado
mensaje Dec 23 2016, 05:20 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
neno1605
mensaje Dec 24 2016, 08:47 AM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 245
Agradecimientos: 774
Registrado: 31-May 11
Miembro No.: 215,763



a mi no me funciono, aparecio el apartado de configurar el apn lo configuro y no levanta señal de internet , otro error es que queda fallando la señal de llamadas, con octoplus tan siquiera la señal es estable, ahora restaure el telefono y ya no pasa de la configuracion inicial solo queda pidiendo idioma, tenga cuidado con este proceso.


--------------------
Valora la ayuda, un simple gracias motiva a seguir ayudando
Go to the top of the page
 
+Quote Post
jc95
mensaje Feb 13 2017, 06:18 PM
Publicado: #3

Maestro del Clan
***

Grupo: Miembros
Mensajes: 714
Agradecimientos: 1316
Registrado: 6-February 12
Desde: CELUDARIO_Ciudad Dario-NICARAGUA
Miembro No.: 304,602



CITA(macjacksm @ Dec 23 2016, 06:20 PM) *
Espero les sirva, aunque no encontre nada, si hago spam favor de borrar.
Para hacerlo solo seleccionan en lgtool el modelo LS980, activan depuración y seleccionan solo carga en el teléfono,dan en conectar, abren la pestaña flash/dump y dan unlock, configuran manualmente tipo de banda (gsm) y programan apn de manera normal y a cobrar!

en caso de no detectar el telefono seleccionan el LS696 y siguen las instrucciones para acivar el puerto DIAG ##3424# el SPC se los cuando le dan conectar.

Adjunto capturas y log para que no haya dudas.

P.D. si te sirve no olvides agradecer.

Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.73mb ) Número de descargas: 0
Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.25mb ) Número de descargas: 0


To connect the phone you should select "Charge only" in
Apps\Settings\Connectivity and reconnect the cable
If the phone doesnt load into normal mode due to a corruption
you can launch it in download mode manually:
To switch to Download Mode you should disconnect cable
and power off the phone. Then push and hold
VolumeUp button and while holding
them connect the cable to the phone

Connecting with LS980
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Version: LS676ZV3
Connected
Receiving phone info
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Released: 00:00:00
Firmware Compiled: 16:17:14
Connect mode: Normal
Firmware Version: LS676ZV3
SPC: 093373
MEID: 35878407155xxx
Mobile ESN: 804722xx
SSD_A: 0000000000000000
SSD_B: 0000000000000000
OTKSL: 197681
User Lock Code: 5646
Info received
Unlocking phone
Installing apn launcher
Apn launcher installed. You can edit apns with this program
Checking Emergency Mode...
Mode: Normal
Switching to Emergency Mode...
Mode: Emergency
Checking connect in LAF-Emergency Mode...
Checking...
Checking connect in LAF-Emergency Mode: OK
Initializing connection
making apn list
Unlocking...
Unlocking done
Dumping security zone
Unlocking carrier
Unlocking carrier done
Resetting to normal mode
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Phone successfully unlocked
Don't forget to restart the phone
Disconnected


solo me queda waiting for device
data port timeout
Go to the top of the page
 
+Quote Post
jc95
mensaje Feb 14 2017, 06:15 PM
Publicado: #4

Maestro del Clan
***

Grupo: Miembros
Mensajes: 714
Agradecimientos: 1316
Registrado: 6-February 12
Desde: CELUDARIO_Ciudad Dario-NICARAGUA
Miembro No.: 304,602



Waiting for device...
Device Found: LGLS676e4d3b88f
Type ##3424# in dialing window
Action cancelled
Connecting with LS980
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

Waiting for device...
Device Found: LGLS676e4d3b88f
Type ##3424# in dialing window
data port: timeout:

ME SALE FAIL
Go to the top of the page
 
+Quote Post
jc95
mensaje Feb 14 2017, 06:35 PM
Publicado: #5

Maestro del Clan
***

Grupo: Miembros
Mensajes: 714
Agradecimientos: 1316
Registrado: 6-February 12
Desde: CELUDARIO_Ciudad Dario-NICARAGUA
Miembro No.: 304,602



CITA(macjacksm @ Dec 23 2016, 06:20 PM) *
Espero les sirva, aunque no encontre nada, si hago spam favor de borrar.
Para hacerlo solo seleccionan en lgtool el modelo LS980, activan depuración y seleccionan solo carga en el teléfono,dan en conectar, abren la pestaña flash/dump y dan unlock, configuran manualmente tipo de banda (gsm) y programan apn de manera normal y a cobrar!

en caso de no detectar el telefono seleccionan el LS696 y siguen las instrucciones para acivar el puerto DIAG ##3424# el SPC se los cuando le dan conectar.

Adjunto capturas y log para que no haya dudas.

P.D. si te sirve no olvides agradecer.

Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.73mb ) Número de descargas: 0
Fichero Adjunto  IMG_2016... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 2.25mb ) Número de descargas: 0


To connect the phone you should select "Charge only" in
Apps\Settings\Connectivity and reconnect the cable
If the phone doesnt load into normal mode due to a corruption
you can launch it in download mode manually:
To switch to Download Mode you should disconnect cable
and power off the phone. Then push and hold
VolumeUp button and while holding
them connect the cable to the phone

Connecting with LS980
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Version: LS676ZV3
Connected
Receiving phone info
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Released: 00:00:00
Firmware Compiled: 16:17:14
Connect mode: Normal
Firmware Version: LS676ZV3
SPC: 093373
MEID: 35878407155xxx
Mobile ESN: 804722xx
SSD_A: 0000000000000000
SSD_B: 0000000000000000
OTKSL: 197681
User Lock Code: 5646
Info received
Unlocking phone
Installing apn launcher
Apn launcher installed. You can edit apns with this program
Checking Emergency Mode...
Mode: Normal
Switching to Emergency Mode...
Mode: Emergency
Checking connect in LAF-Emergency Mode...
Checking...
Checking connect in LAF-Emergency Mode: OK
Initializing connection
making apn list
Unlocking...
Unlocking done
Dumping security zone
Unlocking carrier
Unlocking carrier done
Resetting to normal mode
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Phone successfully unlocked
Don't forget to restart the phone
Disconnected

QUE VERSION DE LGTOOL ES la que usastes
Go to the top of the page
 
+Quote Post
boster27
mensaje Mar 27 2017, 01:21 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 7
Agradecimientos: 44
Registrado: 25-January 13
Miembro No.: 428,986



A mi me funciono. Tuve que elegir el modelo LS660 para leer el SPC, luego termine el proceso con el modelo LS980. Confirmado que habilita la opcion de agregar el APN y funcionan los datos. Gracias!!
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a boster27 por su Colaboracion:
CARLOS RANGEL, manuel.1
abelsuarez
mensaje Apr 22 2017, 08:03 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 10
Registrado: 13-February 17
Desde: los mochis sinaloa
Miembro No.: 925,344
Pais:mx


le di reparara network y se reinicia y ya no inicia normalmente a alguien le a pasado ?? sdaludos
Go to the top of the page
 
+Quote Post
CARSACELL
mensaje Apr 22 2017, 09:22 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 106
Agradecimientos: 177
Registrado: 23-February 12
Desde: tamaulipas mexico
Miembro No.: 310,901
Pais:mx


CITA(abelsuarez @ Apr 22 2017, 07:03 PM) *
le di reparara network y se reinicia y ya no inicia normalmente a alguien le a pasado ?? sdaludos



con el cable restor que tiene la resistencia de 910k lo apagas y lo conectas y le das reparar network esto con la octoplus y te lo deja andando de nuevo me acava de pasar hace un momento el que tengo yo aqui no se deja liberar esta en version ls676v4 y veo que los que se liberan sin problemas bienen en version ls676v3 no se si ahi alguna sugerencia a esto


--------------------
Vivir y Dejar Vivir .............
Go to the top of the page
 
+Quote Post
novatin
mensaje Apr 25 2017, 09:23 AM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 21
Agradecimientos: 26
Registrado: 11-March 15
Miembro No.: 697,025



DIRECTO

To connect the phone you should select "Charge only" in
Apps\Settings\Connectivity and reconnect the cable
If the phone doesnt load into normal mode due to a corruption
you can launch it in download mode manually:
To switch to Download Mode you should disconnect cable
and power off the phone. Then push and hold
VolumeUp button and while holding
them connect the cable to the phone

Connecting with LS980
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Version: LS980ZVE
Connected
Receiving phone info
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Released: 20:00:00
Firmware Compiled: 12:57:42
Connect mode: Normal
Firmware Version: LS980ZVE
SPC: 898807
MEID: 99000252211347
Mobile ESN: 803F8233
Phone Number(MDN): 5123758001
min1: 7401418
min2: 512
SID/NID: 4139/65535
SSD_A: B84C15C222B2BA93
SSD_B: C71EE73A6C080932
AKEY: 18028393984758102292
OTKSL: 846906
User Lock Code: 4295
MCC: 310
MNC: 0
Info received
Dumping NVM to C:/Program Files (x86)/LGE Tool/LS980_nvm.sbf
Dump NVM: Start
Dumping NVM...
Dump NVM: Finish
Dump NVM success (02:09)
Unlocking phone
Adb device is unauthorized
Please check the confirmation dialog on your device
Installing apn launcher
Apn launcher installed. You can edit apns with this program
Checking Emergency Mode...
Mode: Normal
Switching to Emergency Mode...
Mode: Emergency
Checking connect in LAF-Emergency Mode...
Checking...
Checking...
Checking connect in LAF-Emergency Mode: OK
Initializing connection
making apn list
Unlocking...
Unlocking done
Dumping security zone
Unlocking carrier
Unlocking carrier done
Resetting to normal mode
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Phone successfully unlocked

LG TOOL 2.58

Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 09:03 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +