Backup de NCK Box, Motorola xt1756 Moto C
Action : Firmware update.
Selected Model: Motorola: XT1756
Exe version: NCKDongle AndroidMTK 2.5.9.6
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM112)
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e36324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464E36324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM125)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Starting flash.
Send preloader...
Error: Is not posible to write readed firmware in this phone.
This phone will accept only factory signed firmware.
Wait untill phone will start charging.
All done.
Potenciado por Invision Power Board
© Invision Power Services