Justamente hoy Con la nueva actualizacion de chimera tenia por semanas tirado un j260m con imei en 00000 ya que no estaba soportado
entonces procedi a pasarle el root, posteriormente a repara y parchar
Como ya sabemos en binarios anteriores
primeramente nos aseguramos que el KG nos permita root
si lo tenemos prenormal, lo dejamos conectado con wifi unos minutos
vemos que este visible el OEM y lo activamos
ya luego entramos a modo download
y pasamos el archivo root respectivo al binary que dejare adjunto, realizamos un hard reset y esperar a que encienda
Ya encendido, volvemos a repetir el procedimiento para el KG para que no se nos quede pegado en las letras rojas
y tambien para que la apk de Magisk se actualice y se instale (todo esto con Wifi)
reparamos y parchamos con Chimera, en ambos procesos elegimos la opcion de: Febrero 2020
aqui el Log
Reparar
Repair started
Unable to detect IMEI number.
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: PNT
Country Code: PERU
Timezone: America/La_Paz
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Thu Aug 29 23:16:51 KST 2019
PDA Version: J260MUBS6ASHD [august 2019, revD]
Phone Version: J260MUBS6ASHA [august 2019, revA]
CSC Version: J260MOWE6ASH3 [august 2019, rev3]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28M42BW7KP
Imei: 000000000000000
Battery Status: 3.83V (11%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Warranty Bit: 0
Security Patch: 2019-09-01
Data Encryption State: unsupported
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Current imei: 000000000000000
Repaired imei: 3547899XXXXXXXX
Successfully finished.
Finished at local time: [02.13.20 13:12:55]
WorkID: 88994704
Parchar
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260M
Sales Code: PNT
Country Code: PERU
Timezone: America/La_Paz
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Thu Aug 29 23:16:51 KST 2019
PDA Version: J260MUBS6ASHD [august 2019, revD]
Phone Version: J260MUBS6ASHA [august 2019, revA]
CSC Version: J260MOWE6ASH3 [august 2019, rev3]
Product Code: PNT
HIDSw Version: J260MUBS6ASHD/J260MOWE6ASH3/J260MUBS6ASHA/J260MUBS6ASHD
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: R28M42BW7KP
Imei: 3547899XXXXXXXX
Unique Number: CFE00777F9A3846
Connections: AT,MTP
Battery Status: 3.83V (12%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Warranty Bit: 0
Security Patch: 2019-09-01
Data Encryption State: unsupported
Preparing...
Checking root access.
The phone is rooted by: 21.0:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [02.13.20 13:15:34]
WorkID: 88994976
no me deja instalar magisk me dice no se pudo instalar la aplicacion
Potenciado por Invision Power Board
© Invision Power Services