A515f Bit 4 Liberacion De Red Con Z3x Parche 1 Septiembre 2020 Opciones

[charly7782]

Hola tuve problemas primero por que la caja no me realiza la operación me salía fallido
luego intente con octoplus pero no estaba soportado el miden , seguí intentando como 3 veces mas con z3x hasta que me dio el código de desbloqueo
RNDIS+ADB<--- Con esa opción de USB intente y wifi conectado al equipo celular

UNLOCK INSTRUCTIONS:
To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-A515F
Software version: 45.14

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK(Freeze, PUK) code, using this method will consume credits twice - first for MCK(Freeze, PUK) code and then for NCK(Network, PIN). Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A515F
Android version: 10
PDA version: A515FXXU4CTJ3
CSC version: A515FOWB4CTJ1
Phone version: A515FXXU4CTJ2
Product code: SM-A515FZKLBVT
CSC country code: Bolivia
CSC sales code: BVT
Carrier ID: BVT
Phone SN: R58NC54MXYY
IMEI: 355035119165089
HW version: MP 0.3E
RF cal date: 20201231
Chip name: EXYNOS9611
Modem board: SHANNON337
Security patch: 2020-10-01
Boot Warranty bit: 0
SIM State: ABSENT
Checking SIM status... OK
Initialization zTool... OK
Running zTool, please wait... OK
Initialization... OK
Reading lock state... OK
Executing... OK
Searching Ramdump interface... COM22 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK, PUK): 963*****
Network code (NCK, PIN, REGIONAL): 204*****

Done with Samsung Tool PRO v.45.14 [SM-A515F,Read Codes via Server]