ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

2 Páginas: V  < 1 2  
Reply to this topicStart new topic
G610m Bit 6 Reparar Imei Ayuda
Dan&Cab
mensaje Dec 10 2019, 05:12 PM
Publicado: #21

Miembro del Clan
*

Grupo: Miembros
Mensajes: 23
Agradecimientos: 34
Registrado: 5-October 16
Miembro No.: 881,442
Pais:ar


CITA(Iram @ Nov 6 2019, 12:10 PM) *
con el seguimiento del proceso de reparacion imie g610m binario 6 proceder reparar serial sin root lugo root con odin 3.13.1, TWRP-3.2.3-For-Galaxy-J7-Prime y magisk 19.3 lo demas ya lo postiaron los colegas todo el procedimiento aqui esta la prueba en mi caso tube que parchear como 6 veces hasta que funsiono


Efectivamente como afirma el compañero, mismo procedimiento, en mi caso salió a la primera. G610M B6 8.1.0
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Dan&Cab por su Colaboracion:
maxoforlin
Anunciante Autorizado
mensaje Dec 10 2019, 05:12 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
Dr.Celelular
mensaje Dec 11 2019, 10:09 PM
Publicado: #22

Miembro del Clan
*

Grupo: Miembros
Mensajes: 116
Agradecimientos: 75
Registrado: 27-July 12
Miembro No.: 367,915
Pais:ad


Compañeros alguien tiene combination u6?
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Dr.Celelular por su Colaboracion:
silvano83
enigmagsm
mensaje Dec 13 2019, 11:24 AM
Publicado: #23

Miembro del Clan
*

Grupo: Miembros
Mensajes: 103
Agradecimientos: 87
Registrado: 3-April 17
Miembro No.: 939,587
Pais:co


Sale sin necesidad de Root en este momento, estoy haciendo lo mismo con binario6 parche de seguridad Agosto 2019, en soporte me dijeron que bajara a seguridad de 1 Julio 2019 y lo intentara... Ya les confirmo cuando le meta la version anterior...

Fichero Adjunto  Screensh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 23.01k ) Número de descargas: 0

Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a enigmagsm por su Colaboracion:
antraxh57
enigmagsm
mensaje Dec 15 2019, 06:56 PM
Publicado: #24

Miembro del Clan
*

Grupo: Miembros
Mensajes: 103
Agradecimientos: 87
Registrado: 3-April 17
Miembro No.: 939,587
Pais:co


señores estoy en las mismas... el problema persiste. no puedo reparar el 1me1 ya que me sale "Unknown modem version." y finaliza... he intentado en las 2 opciones sin root... y esta formateado y limpio...

Fichero Adjunto  error.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 42.37k ) Número de descargas: 0


alguna solucion al respecto??? se los agradecere...

al principio sale:

CÓDIGO
Unable to detect IMEI number and baseband version. It seems that the modem does not work or the network is unavailable/disabled.




CÓDIGO
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G610M
Sales Code: TPA
Country Code: PANAMA
Timezone: America/New_York
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Fri Jul 5 07:53:00 KST 2019
PDA Version: G610MUBU6CSG1 [july 2019, rev1]
CSC Version: G610MUUB6CSG1 [july 2019, rev1]
Board Platform: EXYNOS5
Serial Number: R28J93GVKVH
Battery Status: 4.14V (87%)
Network Type: GSM
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-07-01
Data Encryption State: encrypted
Repair imei...
Checking modem version.
Unknown modem version.
Finished at local time: [12.15.19 17:52:24]


Mensaje modificado por enigmagsm el Dec 15 2019, 06:59 PM
Go to the top of the page
 
+Quote Post
youmother
mensaje Dec 16 2019, 12:10 AM
Publicado: #25

Sensei Supremo del Clan
*****

Grupo: Miembros
Mensajes: 2,567
Agradecimientos: 2484
Registrado: 14-May 11
Miembro No.: 210,434
Pais:li


CITA(enigmagsm @ Dec 15 2019, 06:56 PM) *
señores estoy en las mismas... el problema persiste. no puedo reparar el 1me1 ya que me sale "Unknown modem version." y finaliza... he intentado en las 2 opciones sin root... y esta formateado y limpio...

Fichero Adjunto  error.pn... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 42.37k ) Número de descargas: 0


alguna solucion al respecto??? se los agradecere...

al principio sale:

CÓDIGO
Unable to detect IMEI number and baseband version. It seems that the modem does not work or the network is unavailable/disabled.

CÓDIGO
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G610M
Sales Code: TPA
Country Code: PANAMA
Timezone: America/New_York
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Fri Jul 5 07:53:00 KST 2019
PDA Version: G610MUBU6CSG1 [july 2019, rev1]
CSC Version: G610MUUB6CSG1 [july 2019, rev1]
Board Platform: EXYNOS5
Serial Number: R28J93GVKVH
Battery Status: 4.14V (87%)
Network Type: GSM
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2019-07-01
Data Encryption State: encrypted
Repair imei...
Checking modem version.
Unknown modem version.
Finished at local time: [12.15.19 17:52:24]


Amigo pero le falto indicar si el telefono muestra correctamente el baseband y el imei...
Go to the top of the page
 
+Quote Post
kennarth
mensaje Jan 25 2020, 11:31 AM
Publicado: #26

Miembro del Clan
*

Grupo: Miembros
Mensajes: 36
Agradecimientos: 68
Registrado: 23-September 08
Desde: Nicaragua
Miembro No.: 7,212
Pais:ni


Listo amigos ya se puede reparar IMEI al J7 Prime binario 6
Necesitan Root en mi caso le puse Magisk 20.3
Necesitan conexion a internet ya que se hace via server
no consume creditos...
Aqui les dejo el LOG de Operaciones
Primero Reparar IMEI luego Patch Cert...

Operation: Repair
Selected model: SM-G610M
Software version: 39.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 8.1.0
PDA version: G610MUBU6CSG1
CSC version: G610MUUB6CSG1
Phone version: G610MUBU6CSG1
Product code: SM-G610MZKATPA
CSC country code: PANAMA
CSC sales code: TPA
Phone SN: R5XXXXXXXXXXXX
IMEI: 35XXXXXXXXXXXXX
HW version: MP 0.200
RF cal date: 20180518
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-07-01
Boot Warranty bit: 1
SIM State: READY
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Writing security... OK
Rebooting phone... OK


Operation: Patch Certificate
Selected model: SM-G610M
Software version: 39.1

Waiting ADB device... OK
Reading phone info...
Model: SM-G610M
Android version: 8.1.0
PDA version: G610MUBU6CSG1
CSC version: G610MUUB6CSG1
Phone version: G610MUBU6CSG1
Product code: SM-G610MZKATPA
CSC country code: PANAMA
CSC sales code: TPA
Phone SN: R5XXXXXXXXXX
IMEI: 35XXXXXXXXXXXXXXX
HW version: MP 0.200
RF cal date: 20180518
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2019-07-01
Boot Warranty bit: 1
SIM State: READY
Checking Super user right... true
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Searching server... OK
Waiting for server answer... OK
Patching... OK
Rebooting phone... OK


Agradecer no cuesta nada colegas...

Disculpen colegas no les aclare que el aporte para reparar el IMEI lo hice con Z3X la ultima version...
Saludes....

Mensaje modificado por frontlinecel el Jan 27 2020, 08:46 AM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a kennarth por su Colaboracion:
maycolbaldaro19
maxi95ist
mensaje Jan 27 2020, 01:56 AM
Publicado: #27

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 10-June 16
Miembro No.: 838,283
Pais:ar


Hola buenas noches es la primera vez que publico algo aqui asi que me disculpo si no esta bien

yo para reparar este equipo primero reparo el imei antes del root y despues si rooteo por twrp-3.3.1-0-j7elte yo uso este
despues lo de siempre no-verity-opt-encrypt-6.0, bypass rmm v2 y uso magisk 19.4
el firmware que uso es de TTT G610MUBU6CSG1 mas precisamente es este
aveces falla la primera vez que se parcha solo hay que seguir intentando a mi me ah llegado a fallar 3 veces seguidas asi que es cuestion de intener varias veces

aqui dejo uno de los logs

Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-G610M
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 8.1.0 [M1AJQ] [SDK 27]
Build Date: Fri Jul 5 07:53:00 KST 2019
PDA Version: G610MUBU6CSG1 [july 2019, rev1]
Phone Version: G610MUBU6CSG1 [july 2019, rev1]
CSC Version: G610MUUB6CSG1 [july 2019, rev1]
Product Code: ARO
HIDSw Version: G610MUBU6CSG1/G610MUUB6CSG1/G610MUBU6CSG1/G610MUBU6CSG1
Board Platform: EXYNOS5
Modem Platform: SHANNON315
Serial Number: R28J804....
Imei: 3557640806.....
Unique Number: CAJ0326D3FE3D74
Connections: AT,MTP
Battery Status: 4.13V (93%)
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 0
Security Patch: 2019-07-01
Data Encryption State: unencrypted
Preparing...
Checking root access.
The phone is rooted by: 19.4:MAGISKSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-90 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
If a new firmware is used, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [01.21.20 20:23:24]
WorkID: 86801799
Go to the top of the page
 
+Quote Post
Quique Corriente...
mensaje Feb 3 2020, 05:55 PM
Publicado: #28

Miembro del Clan
*

Grupo: Miembros
Mensajes: 48
Agradecimientos: 43
Registrado: 4-November 08
Miembro No.: 10,923



Hice todo el proceso correctamente con el firmware G610MUBU6CSG1_G610MUUB6CSG1-TTT, Magisk-v19.3 y sale todo bien, repara, patch, pero el equipo queda en "No hay conexion de red".
No puedo sacarlo de ahi...
Go to the top of the page
 
+Quote Post
Gorditos
mensaje Feb 4 2020, 03:12 AM
Publicado: #29

Miembro del Clan
*

Grupo: Miembros
Mensajes: 48
Agradecimientos: 39
Registrado: 24-January 20
Miembro No.: 1,160,797
Pais:pe


CITA(Quique Corrientes @ Feb 3 2020, 05:55 PM) *
Hice todo el proceso correctamente con el firmware G610MUBU6CSG1_G610MUUB6CSG1-TTT, Magisk-v19.3 y sale todo bien, repara, patch, pero el equipo queda en "No hay conexion de red".
No puedo sacarlo de ahi...

Pon modo avión y luego desconecta modo avión , te toma señal
Go to the top of the page
 
+Quote Post
ropula1
mensaje Feb 4 2020, 07:13 AM
Publicado: #30

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 157
Agradecimientos: 286
Registrado: 2-September 19
Miembro No.: 1,138,376
Pais:bo


CITA(Quique Corrientes @ Feb 3 2020, 06:55 PM) *
Hice todo el proceso correctamente con el firmware G610MUBU6CSG1_G610MUUB6CSG1-TTT, Magisk-v19.3 y sale todo bien, repara, patch, pero el equipo queda en "No hay conexion de red".
No puedo sacarlo de ahi...

tienes que esperar unos 30 segundos para que tome señal amigo y veifica que este reparado marcando +#0011*# y este imei en ok y no en null.

Mensaje modificado por ropula1 el Feb 4 2020, 07:29 AM
Go to the top of the page
 
+Quote Post
chalitosama
mensaje Feb 12 2020, 09:05 AM
Publicado: #31

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 321
Agradecimientos: 613
Registrado: 15-October 11
Desde: Ecuador
Miembro No.: 265,324



Buenos dias colegas-binario 6 si sale-alguien a hecho binario 7 por favor se le agradece el proceso.
Go to the top of the page
 
+Quote Post
javierreal
mensaje Feb 12 2020, 05:24 PM
Publicado: #32

Miembro del Clan
*

Grupo: Miembros
Mensajes: 27
Agradecimientos: 88
Registrado: 6-April 15
Miembro No.: 705,211
Pais:mx


que tal amigos ,les comparto el archivo que a mi me funciono para el root,cargamos el archivo con odin 13.3 en pda, si al finalizar pide restablecer le damos que si,ya que inicie el telefono solo actualizamos el magisk,si les funciona no olviden agradecer. rolleyes.gif

Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a javierreal por su Colaboracion:
andreaunlock, colosounlock
colosounlock
mensaje Mar 24 2020, 08:51 AM
Publicado: #33

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 588
Agradecimientos: 713
Registrado: 23-January 10
Desde: Añatuya, Sgo del estero
Miembro No.: 80,970
Pais:ar


CITA(javierreal @ Feb 12 2020, 05:24 PM) *
que tal amigos ,les comparto el archivo que a mi me funciono para el root,cargamos el archivo con odin 13.3 en pda, si al finalizar pide restablecer le damos que si,ya que inicie el telefono solo actualizamos el magisk,si les funciona no olviden agradecer. rolleyes.gif


genio asi de esta forma me funcionó lo hice tal cual nada mas que desinstale la version de magisk y baje la actualizada y salió 100%
Gracias
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a colosounlock por su Colaboracion:
andreaunlock
billy-idol
mensaje Jun 12 2020, 06:25 AM
Publicado: #34

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 4
Registrado: 23-December 19
Desde: Sweden
Miembro No.: 1,156,264



COLOSOUNLOCK

Agradeceria quien pueda ayudarme. Soy nuevo en estos temas casi no se demasiado. LEs comento un tecnico me hizo un j7 prime Duos y duro una semana, pasaron ya 5 meses y aun tengo a la clienta quejándose. Tengo los IMEIS ok. Estan ok en enacom, Instalo la rom G610MUBU6CSG1 (PEO) obvio soy de ARgentina. Hago todos los pasos en chimera. Metos los archivos de la rom menos el último osea cargo el firmware BL AP CP CSC . Usaser data y PIT el tecnico anterior me dijo que no se instalaban,.,., Lo flasheo lo mas bien con chimera. Los imeis reparados ok pero el tema esta en que no me patchea el certificado. Ya probe con las dos de noviembre y de febrero y nada en la de Febrero me dice modem no soportado y en la de noviembre 2019 no lo patchea.
Agradecere toda info paso a paso por que les soy sincero me cuesta mucho entender esto aun. Mil gracias.
PD el J7 prime es DUAL SIM creo es modelo 2015 . Saludos Les dejo un email
yerryratnono@sera_expulsado.com


--------------------
Go to the top of the page
 
+Quote Post
BBgamarra
mensaje Jun 27 2020, 11:30 AM
Publicado: #35

Miembro del Clan
*

Grupo: Miembros
Mensajes: 218
Agradecimientos: 308
Registrado: 11-July 14
Desde: PARAGUAY
Miembro No.: 619,500



CITA(youmother @ Jun 20 2020, 02:54 PM) *
En el log puede verse claramente.

root b7 pasa el archivo por odin y magick apk ... ente todos hacer un hart reset previo
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a BBgamarra por su Colaboracion:
tecjimclangsm
geberit
mensaje Aug 7 2020, 06:31 AM
Publicado: #36

Miembro del Clan
*

Grupo: Miembros
Mensajes: 99
Agradecimientos: 102
Registrado: 6-July 13
Desde: Argentina
Miembro No.: 489,385
Pais:ar


en binario 8 alguien ya pudo repararlo?
Go to the top of the page
 
+Quote Post
BBgamarra
mensaje Aug 7 2020, 11:45 AM
Publicado: #37

Miembro del Clan
*

Grupo: Miembros
Mensajes: 218
Agradecimientos: 308
Registrado: 11-July 14
Desde: PARAGUAY
Miembro No.: 619,500




-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM750
Selected model: SM-G610M
Operation: Repair Network
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G610M
Firmware compiled date: Tue Dec 31 03:30:29 KST 2019
PDA version: G610MUBS7CTA1
CSC version: G610MUUB7CTA1
SW version: G610MUBS7CTA1
Build number: QB14786060
Phone SN: R58K4101PTV
Android version: 8.1.0 (M1AJQ)
Sales code: TTT
Country: TRINIDAD AND TOBAGO
HW platform: exynos5
HW Chip: exynos7870
HW Modem: SHANNON315
Security patch level: 2020-01-01
Warranty Void: 1
SIM 1 status: absent
Codename: on7xelteub
Checking Root:
Phone is Rooted.
-----------------------------------------------------------------------------------
Connecting to server ..
Username: oct_KfGsVqf
Connect to server successfull.
Checking smart card...
Your balance: 100 credits.
Checking operation...OK
-----------------------------------------------------------------------------------
Repairing network. Please wait, this can take some time...OK
Network is successfully repaired.
Performed by 2.9.7.3 Software version.
Go to the top of the page
 
+Quote Post
claudiobritez
mensaje Aug 7 2020, 01:34 PM
Publicado: #38

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 179
Agradecimientos: 139
Registrado: 27-October 09
Miembro No.: 66,824
Pais:ad


estoy buscando para binario 8 y tampoco puedo hacerlo me dicen que no esta soportado
Go to the top of the page
 
+Quote Post
austerio94
mensaje Aug 10 2020, 08:20 AM
Publicado: #39

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 0
Registrado: 24-July 15
Desde: GB
Miembro No.: 738,685
Pais:ve


Para binario 8 se podrá hacer f4 ???


--------------------
Go to the top of the page
 
+Quote Post
jhonnydan
mensaje Aug 13 2020, 01:22 PM
Publicado: #40

Miembro del Clan
*

Grupo: Miembros
Mensajes: 30
Agradecimientos: 65
Registrado: 7-February 13
Miembro No.: 433,967



CITA(claudiobritez @ Aug 7 2020, 02:34 PM) *
estoy buscando para binario 8 y tampoco puedo hacerlo me dicen que no esta soportado


aun no amigo solo hasta el b7
Go to the top of the page
 
+Quote Post

2 Páginas: V  < 1 2
Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 11:34 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +