ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Como Unlock Y Root Ls990?
Tigounlock
mensaje Apr 4 2015, 01:56 PM
Publicado: #1

Gran Maestro del Clan
****

Grupo: Miembros
Mensajes: 1,971
Agradecimientos: 1485
Registrado: 9-April 10
Desde: GB
Miembro No.: 96,027
Pais:co


wacko.gif Tengo un Lg G3 ls990 sprint en la version 5.0.1 y no logro hacerle ni root y mucho menos unlock.. alguien tuvo la experiencia y la solucion qe la comparta conmigo Gracias

Mensaje modificado por alexacel el Apr 4 2015, 02:42 PM
Motivo de edición: Titulo incorrecto


--------------------
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Apr 4 2015, 01:56 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
Tigounlock
mensaje Apr 9 2015, 03:21 PM
Publicado: #2

Gran Maestro del Clan
****

Grupo: Miembros
Mensajes: 1,971
Agradecimientos: 1485
Registrado: 9-April 10
Desde: GB
Miembro No.: 96,027
Pais:co


Sin info amigo, No halle informacion al respecto por ningun lado


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a Tigounlock por su Colaboracion:
choloma, edw1411
intecel
mensaje May 22 2015, 02:22 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 130
Agradecimientos: 837
Registrado: 9-March 10
Desde: Tuxtla Gutierrez, Chiapas, Mexico
Miembro No.: 89,605



hola amigos ya paso mas del mes que preguntaron... a alguien ya le quedo que comparta su experiencia, gracias


--------------------
mi herramienta de trabajo

........:::::::ClanGSM:::::::........
Go to the top of the page
 
+Quote Post
Tigounlock
mensaje May 22 2015, 02:42 PM
Publicado: #4

Gran Maestro del Clan
****

Grupo: Miembros
Mensajes: 1,971
Agradecimientos: 1485
Registrado: 9-April 10
Desde: GB
Miembro No.: 96,027
Pais:co


Personalmente yo creo que este phone es CDMA y no funciona en redes gsm.. Moderadores estan?


--------------------
Go to the top of the page
 
+Quote Post
AnielMX
mensaje May 30 2015, 09:35 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 85
Agradecimientos: 146
Registrado: 20-January 13
Desde: Ciudad Juaréz, Chihuahua
Miembro No.: 426,990



La unica solucion es hacer downgrade a la 4.4.2 y de alli proceder a realizar el root con Stumproot
Go to the top of the page
 
+Quote Post
SiriusV
mensaje May 31 2015, 08:17 AM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 189
Agradecimientos: 83
Registrado: 3-September 09
Desde: Mexico
Miembro No.: 57,367



Tienen que degradar primero a kit kat, algunas veces falla double tap to wake o como lo llame lg
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a SiriusV por su Colaboracion:
cesarvale
phonemonca
mensaje Jun 10 2015, 04:19 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 107
Agradecimientos: 41
Registrado: 10-November 11
Desde: honduras tegucigalpa
Miembro No.: 274,874



es correcto lo tienen que bajar la vercion de androi ala 4.4.2 luego rotearlo depues directo unlock y sale al 100% probado por mi ojo despues de bajarlo de vercion de androi probar directamente sin necesidad de roteo la misma box lo hase
Go to the top of the page
 
+Quote Post
heramez
mensaje Jun 24 2015, 05:38 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 1
Registrado: 24-June 15
Miembro No.: 729,779
Pais:hn


Hola Phonemonca, cuando dices esto:
CITA(phonemonca @ Jun 10 2015, 03:19 PM) *
depues directo unlock y sale al 100%


A que te refieres? es automático o se necesita algun otro proceso despues de rootear con Stump Root?
Go to the top of the page
 
+Quote Post
Pablos
mensaje Sep 2 2016, 03:47 PM
Publicado: #9

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 418
Agradecimientos: 720
Registrado: 12-July 09
Desde: Honduras,Tegucigalpa
Miembro No.: 47,554
Pais:hn


CITA(AnielMX @ May 31 2015, 03:35 AM) *
La unica solucion es hacer downgrade a la 4.4.2 y de alli proceder a realizar el root con Stumproot



LG LS990 Sprint en la versión 4.4.2 le realicé Unlock con LGTool 2.58 , sólo verifique que tienen:

--Modo depuración actuvado

- -Seleccionado tipo de conexión Sólo Carga

--Enable Diag, el mismo LG tool les dice como habilitar ##3424# y si pide pass es 000000 , allí la opción de activar el diag mode.

Antess lo rootee con iRoot sin problema.

-- En la Ficha Flash/ Dump Serrvices click en Unlock, si pide autorización de depuración y Root, darle permisos y la cajita hará el resto. ,


Fichero Adjunto  1.jpg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 183.73k ) Número de descargas: 0



Log
------------------------------------------------------------------------------
Universal Tool version: 2.58
OS Version: Windows 7 [NT 6.1] Service Pack 1
Administrative privileges: yes
Locale: Guatemala / Spanish
CPU frequency: 3017 MHz
Total memory: 3037 MB
Free memory: 1073 MB
Free space on system disk C:\: 17.00 GB
Free space on disk D:\: 6.00 GB
You are not using Windows XP. Correct work can only be guaranteed on Windows XP operating system.
Connecting with LS990
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

Adb device is unauthorized
Please check the confirmation dialog on your device
There are no adb devices connected to the system
Android Usb debug should be already switched on
You should enable debug in your android device and connect the cable to it
If ADB connection is not set within 5 seconds reconnect usb cable
LG Android driver should be already installed

Sometimes after firmware flashing you have to replug the cable to connection be established
Waiting for device...
Device Found: LGLS990ea78377
Checking root ...
If you see a "SU grant request" window on screen click "Grant" button
Short version ZV4
Waiting for device...
Device Found: LGLS990ea78377
Type ##3424# in dialing window and enter 000000 password
Action cancelled
Connecting with LS990
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

There are no adb devices connected to the system
Android Usb debug should be already switched on
You should enable debug in your android device and connect the cable to it
If ADB connection is not set within 5 seconds reconnect usb cable
LG Android driver should be already installed

Sometimes after firmware flashing you have to replug the cable to connection be established
Waiting for device...
Device Found: LGLS990ea78377
Checking root ...
If you see a "SU grant request" window on screen click "Grant" button
Short version ZV4
Waiting for device...
Device Found: LGLS990ea78377
Type ##3424# in dialing window and enter 000000 password
Action cancelled
Connecting with LS990
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

Waiting for device...
Device Found: LGLS990ea78377
Checking root ...
If you see a "SU grant request" window on screen click "Grant" button
Short version ZV4
Waiting for device...
Device Found: LGLS990ea78377
Type ##3424# in dialing window and enter 000000 password
Action cancelled
Connecting with LS990
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

Waiting for device...
Device Found: LGLS990ea78377
Checking root ...
If you see a "SU grant request" window on screen click "Grant" button
In window that will appear. Set DiagMode to "Enable"
Also set connection mode to "Charge only" in USB PC Connection
Action cancelled
Connecting with LS990
The diag com-port is not found
If diag mode is already enabled check that the "USB PC Connection" is set to charge phone.

There are no adb devices connected to the system
Android Usb debug should be already switched on
You should enable debug in your android device and connect the cable to it
If ADB connection is not set within 5 seconds reconnect usb cable
LG Android driver should be already installed

Sometimes after firmware flashing you have to replug the cable to connection be established
Waiting for device...
Device Found: LGLS990ea78377
Checking root ...
If you see a "SU grant request" window on screen click "Grant" button
In window that will appear. Set DiagMode to "Enable"
Also set connection mode to "Charge only" in USB PC Connection
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Version: LS990ZV4
Connected
Receiving phone info
Getting Extra Info...
Getting Proto Version...
Getting...
Getting Proto Version...OK:5
Getting Extra Info: OK
Firmware Released: 02:00:00
Firmware Compiled: 18:23:04
Connect mode: Normal
Firmware Version: LS990ZV4
SPC: 899189
MEID: 35285455606---editado smile.gif
Mobile ESN: 800BEF3D
Phone Number(MDN): 4046211
min1: 6374363
min2: 678
SID/NID: 4139/65535
SSD_A: 4478621C2AD9
SSD_B: 0FF132A5937
AKEY: 15595945718
OTKSL: 832141
User Lock Code: 0241
MCC: 310
MNC: 0
Info received
Unlocking phone
Installing apn launcher
Apn launcher installed. You can edit apns with this program
Checking Emergency Mode...
Mode: Normal
Switching to Emergency Mode...
Mode: Emergency
Checking connect in LAF-Emergency Mode...
Checking...
Checking...
Checking connect in LAF-Emergency Mode: OK
Initializing connection
making apn list
Unlocking...
Unlocking done
Dumping security zone
Unlocking carrier
Unlocking carrier done
Resetting to normal mode

Mensaje modificado por Pablos el Sep 2 2016, 03:48 PM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Pablos por su Colaboracion:
lsAGa

Reply to this topicStart new topic
1 usuario(s) está(n) leyendo este tema (1 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 19th April 2024 - 03:22 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +