ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

2 Páginas: V  < 1 2  
Reply to this topicStart new topic
Solucion Liberacion Ls993 Sprint
Jhoncrecords
mensaje Oct 18 2018, 11:22 PM
Publicado: #41

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 0
Registrado: 8-July 14
Miembro No.: 618,654



CITA(gsm2200 @ May 31 2018, 04:46 PM) *
Saludos Colegas,
He Probado este metodo en varios g6 y funciona.
Hoy hice la prueba con otros 2 equipos mas G6 ls993, Todo el proceso instala bien, al final hay que hacer Hard Reset para que pueda subir.
El Problema es que al intentar hacer Hard Reset con las teclas Dice esto (factory data reset is disabled by kill switch)

((Los equipos no tenian Cuenta de Google asociada))

[attachment=292216:g6_Kill_Switch.jpg]

Si Alguien tiene solucion Favor Postear


pudiste soluciar brother
Go to the top of the page
 
+Quote Post
gsm2200
mensaje Oct 19 2018, 08:06 AM
Publicado: #42

Miembro del Clan
*

Grupo: Miembros
Mensajes: 71
Agradecimientos: 85
Registrado: 29-November 17
Miembro No.: 1,006,352
Pais:ad


CITA(Jhoncrecords @ Oct 18 2018, 11:22 PM) *
pudiste soluciar brother


saludos Brother, no, lo que hice fue instalar otras targetas.


--------------------
Octopus LG GcProkey z3x Samsung Xtc2Clip OctopusFRP Dongle SigmaKey Medusa Pro Xtc2 POWER adactor
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Oct 19 2018, 08:06 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.
Haz Shift+Click si deseas
abrir una nueva ventana
sin abandonar ClanGSM
















Go to the top of the page
 
Quote Post
JIMY28815
mensaje Nov 12 2018, 12:21 AM
Publicado: #43

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 19
Registrado: 4-February 18
Miembro No.: 1,021,399
Pais:mx


buenas tardes colegas me arriesgue y flashe uno copilacion zvd con parche de seguridad de octubre 2018 con este fir "LS993zva_to_H87315d_for_unlock.oct que esta en el soporte de octopus y quedo full 100

Welcome to Octoplus/Octopus Box LG Software version 2.8.7
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM15
Selected model: LS993
Reading info...
IMEI: 350305-26-000000-4
Android version: 7.0
Battery level: 90%
SW Version: LS993ZV6
Mode: Emergency
Initializing flash...OK
SW version: LS993ZVD_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: PT01S170712001503
IMEI: 355140-08-196304-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.7 Software version.
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a JIMY28815 por su Colaboracion:
maxunlock, randolfotecnicom
cutocfunlocke
mensaje Nov 17 2018, 04:31 AM
Publicado: #44

Miembro del Clan
*

Grupo: Miembros
Mensajes: 57
Agradecimientos: 10
Registrado: 23-November 12
Miembro No.: 407,417
Pais:cu


CITA(Fernando Reyes @ Apr 6 2018, 05:14 PM) *
Bueno… me aventure a hacerlo y lo logre!!! Si funciona y acá les doy los pasos de cómo lo hice...

Se usan los siguientes 4 archivos:
DRIVERS DE LG: LGMobileDriver_WHQL_Ver_4.2.0
LGUP: LGUP_Store_Frame_Ver_1_14_3
PARCHE DE LGUP: LGUP_V20dll_Patched
ROM: H87315c_00_OPEN_CA_OP_1026.kdz

PASOS:
1. Instalamos los drivers de LG
2. Instalamos LGUP
3. Descomprimimos el parche LGUP_V20dll_Patched
4. Dentro del parche que acabamos de descomprimir encontraremos la carpeta “Model” y el archivo “LGUP.exe” los cuales debemos pegarlos en la ruta donde está instalado el programa LGUP y así sustituir los que ahí ya existen.
Generalmente la ruta donde está instalado es la siguiente: C:\Program Files (x86)\LG Electronics\LGUP
(Recomendación: Eliminar primero la carpeta y el archivo existente y luego pegar los nuevos)
5. Poner nuestro LG G6 en modo Download:
-Apagarlo
-Presionar botón de volumen +
-Conectarle cable USB a la PC
6. Abrir “LGUP.exe” (automáticamente reconocerá nuestro dispositivo LG G6)
7. Ya con LGUP abierto en la sección “File Path” elegir el kdz descargado: H87315c_00_OPEN_CA_OP_1026.kdz
8. Marcar la opción “PARTITION DL” y dar click en “Start”
9. A los pocos segundos de iniciado el proceso nos aparecerá una ventana emergente que se llama “Partition List” en la cual marcaremos la casilla de abajo “Select all” y le damos en OK (con esto marcaremos todas las particiones)
10. Luego nos aparecerá la última ventana emergente “LGUP Common” que nos preguntara lo siguiente: Partition(s) changed “Persist”, “System”, “cache”, “OP”, “Userdata”, Do you want continue? Cliqueamos YES
11. Empezara el proceso de Flasheo que se tardara aproximadamente 3 minutos. Esperar a que este proceso termine (A mí eso me demoro y use un puerto USB 3.0)
12. Cuando el proceso termine LGUP nos mostrara debajo de la columna “Step” el siguiente mensaje: “COMPLETE!...Click here to continue” y nuestro LG se reiniciara.
13. Desconectar nuestro LG G6 y listo iniciara Android por primera vez y lo configuraremos como un dispositivo nuevo.

*Nota: Acá un punto importante, en mi caso mi LG G6 al terminar de flashearlo quedo en bootloop, se reinició y se reinició constantemente sin parar.
Por lo que para sacarlo de ese modo es necesario realizarle también un reseteo de fábrica, así que si su dispositivo después de flashearlo pasa más de 15 minutos reiniciándose constantemente sin pasar del logo de LG es porque también quedo en bootloop, pero tiene solución!.

Y es ingresando al “Factory Data Reset” y aplicándole un reseteo de fábrica. Los pasos son los siguientes:

Presionar botón de encendido y bajar volumen al mismo tiempo, esperar a que se reinicie, luego soltar el botón de encendido y presionarlo 2 veces seguidas sin soltar el boton de bajar volumen. De esa forma ingresamos a la pantalla “Factory Data Reset” en la cual elegiremos “SI”.
Esperamos a que el proceso de formateo termine y eso es todo!.
¡Nuestro LG G6 quedara como nuevo, iniciara correctamente, cargara Android y quedara liberado de fábrica para todas las compañías! smile.gif

Ahhh una cosa más, mi LG G6 en Versión de software decía “LS993ZVA” pero en LGUP aparecía como “LS993ZV4”, pero a pesar de eso me funciono el flasheo.
Y si tienen dudas al respecto ya sea con el procedimiento o los archivos necesarios pueden enviarme un MP para poder ayudarles. wink.gif



muy buena la explicacion,provado en un zvc todo al 100
Go to the top of the page
 
+Quote Post
kedy17
mensaje Dec 3 2018, 10:23 PM
Publicado: #45

Miembro del Clan
*

Grupo: Miembros
Mensajes: 191
Agradecimientos: 109
Registrado: 25-March 18
Miembro No.: 1,034,103
Pais:hn


En la ultima actualizacion de octoplus dice que soporta ls993zv9 y ls993zvA directamente.
Alguien que haga el intento para tenerlo en cuenta.
Gracias
Go to the top of the page
 
+Quote Post
mariluis
mensaje Dec 14 2018, 08:05 AM
Publicado: #46

Miembro del Clan
*

Grupo: Miembros
Mensajes: 16
Agradecimientos: 2
Registrado: 25-October 16
Miembro No.: 888,471
Pais:gt


CITA(johandeuscht @ Sep 10 2018, 08:19 PM) *
Buenas tardes, yo me la jugue y quedo al 10 con la version zvb y le pase ese flash. dejo todo el log de operacion
en mi caso quedo funcionando en TELCEL Mexico. Cada quien hace el proceso bajo su propio riesgo.

Welcome to Octoplus/Octopus Box LG Software version 2.8.8
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM395
Selected model: LS993
Reading info...
IMEI: 350305-26-000000-4
Android version: 7.0
Battery level: 22%
SW Version: LS993ZV3
Mode: Emergency
Initializing flash...OK
SW version: LS993ZVB_17
Android version: 8.0.0
LAF Version: 1.1
Product ID: PT02S170328002197
IMEI: 355140-08-119068-3
Target operator: SPR
Hardware: rev_10
Performed by 2.8.8 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM395
Selected model: LS993
Reading info...
IMEI: 350305-26-000000-4
Android version: 7.0
Battery level: 22%
SW Version: LS993ZV3
Mode: Emergency
Initializing flash...OK
SW version: LS993ZVB_17
Android version: 8.0.0
LAF Version: 1.1
Product ID: PT02S170328002197
IMEI: 355140-08-119068-3
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.8 Software version.



Amigo se podrá con uno zvc
Go to the top of the page
 
+Quote Post
mariluis
mensaje Dec 14 2018, 08:12 AM
Publicado: #47

Miembro del Clan
*

Grupo: Miembros
Mensajes: 16
Agradecimientos: 2
Registrado: 25-October 16
Miembro No.: 888,471
Pais:gt


CITA(JIMY28815 @ Nov 12 2018, 01:21 AM) *
buenas tardes colegas me arriesgue y flashe uno copilacion zvd con parche de seguridad de octubre 2018 con este fir "LS993zva_to_H87315d_for_unlock.oct que esta en el soporte de octopus y quedo full 100

Welcome to Octoplus/Octopus Box LG Software version 2.8.7
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM15
Selected model: LS993
Reading info...
IMEI: 350305-26-000000-4
Android version: 7.0
Battery level: 90%
SW Version: LS993ZV6
Mode: Emergency
Initializing flash...OK
SW version: LS993ZVD_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: PT01S170712001503
IMEI: 355140-08-196304-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.8.7 Software version.



Amigo crees que funcione en un zvc seguridad agosto 2018
Go to the top of the page
 
+Quote Post
kedy17
mensaje Dec 14 2018, 08:19 AM
Publicado: #48

Miembro del Clan
*

Grupo: Miembros
Mensajes: 191
Agradecimientos: 109
Registrado: 25-March 18
Miembro No.: 1,034,103
Pais:hn


CITA(mariluis @ Dec 14 2018, 09:12 AM) *
Amigo crees que funcione en un zvc seguridad agosto 2018


Ya probe con el archivo del soporte de octoplus y quedo bien.
Luego subo el log.
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a kedy17 por su Colaboracion:
ingenieriacelular, kymdolly, mariluis, randolfotecnicom
mariluis
mensaje Dec 14 2018, 08:49 AM
Publicado: #49

Miembro del Clan
*

Grupo: Miembros
Mensajes: 16
Agradecimientos: 2
Registrado: 25-October 16
Miembro No.: 888,471
Pais:gt


CITA(kedy17 @ Dec 14 2018, 09:19 AM) *
Ya probe con el archivo del soporte de octoplus y quedo bien.
Luego subo el log.



gracias amigo y perdona android 8 verdad
Go to the top of the page
 
+Quote Post
kedy17
mensaje Dec 14 2018, 08:51 AM
Publicado: #50

Miembro del Clan
*

Grupo: Miembros
Mensajes: 191
Agradecimientos: 109
Registrado: 25-March 18
Miembro No.: 1,034,103
Pais:hn


Si claro en la version de android 8 LS993ZVC..
Te recomiendo que veas el archivo que este descargado bien, deberia pesar 5.7 GB.
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a kedy17 por su Colaboracion:
kymdolly, mariluis, randolfotecnicom
kedy17
mensaje Dec 14 2018, 11:59 AM
Publicado: #51

Miembro del Clan
*

Grupo: Miembros
Mensajes: 191
Agradecimientos: 109
Registrado: 25-March 18
Miembro No.: 1,034,103
Pais:hn


probado en la version LS993ZVC


Welcome to Octoplus/Octopus Box LG Software version 2.9.0
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM3
Selected model: LS993
Reading info...
IMEI: 355140-08-385427-8
Android version: 8.0.0
Battery level: 50%
SW Version: LS993ZVC
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180919003923
IMEI: 355140-08-385427-8
Target operator: SPR
Hardware: rev_10
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM3
Selected model: LS993
Reading info...
IMEI: 355140-08-385427-8
Android version: 8.0.0
Battery level: 51%
SW Version: LS993ZVC
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180919003923
IMEI: 355140-08-385427-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Setting options...OK
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.0 Software version.
--------------------------------------------------------------------------------
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a kedy17 por su Colaboracion:
jarmat1987, kymdolly, mariluis, randolfotecnicom
henrygob
mensaje Dec 16 2018, 11:55 AM
Publicado: #52

Miembro del Clan
*

Grupo: Miembros
Mensajes: 37
Agradecimientos: 46
Registrado: 8-September 11
Desde: Mexico
Miembro No.: 251,741
Pais:ad


CITA(mariluis @ Dec 14 2018, 09:49 AM) *
gracias amigo y perdona android 8 verdad


otro mas 8.0 seg 1 de agosto

Welcome to Octoplus/Octopus Box LG Software version 2.9.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM2
Selected model: LS993
Reading info...
IMEI: 355140-08-370063-8
Android version: 8.0.0
Battery level: 52%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04*************
IMEI: 355************
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.1 Software version.
Go to the top of the page
 
+Quote Post
elcangrie
mensaje Dec 21 2018, 11:45 AM
Publicado: #53

Miembro del Clan
*

Grupo: Miembros
Mensajes: 20
Agradecimientos: 45
Registrado: 13-March 09
Miembro No.: 26,899



otro mas android 8 vzc




Welcome to Octoplus/Octopus Box LG Software version 2.9.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM5
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-2018-
ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc version 4.9.x
20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Aug 22 15:18:43
KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.1 Software version.
Connecting to server support2.octoplusbox.com:82...OK
Authorizing...OK
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM151
Selected model: LS993
Reading info...
IMEI: 355140-08-xxxxxxxx
Android version: 8.0.0
Battery level: 43%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180929004015
IMEI: 355140-08-427787-5
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.1 Software version.

Mensaje modificado por elcangrie el Dec 21 2018, 11:48 AM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a elcangrie por su Colaboracion:
soscell
Neymendez
mensaje Jan 4 2019, 11:06 PM
Publicado: #54

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 4
Registrado: 26-September 16
Desde: Mexico
Miembro No.: 878,528
Pais:mx


CITA(elcangrie @ Dec 21 2018, 10:45 AM) *
otro mas android 8 vzc
Welcome to Octoplus/Octopus Box LG Software version 2.9.1
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM5
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-2018-
ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc version 4.9.x
20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Aug 22 15:18:43
KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.1 Software version.
Connecting to server support2.octoplusbox.com:82...OK
Authorizing...OK
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM151
Selected model: LS993
Reading info...
IMEI: 355140-08-xxxxxxxx
Android version: 8.0.0
Battery level: 43%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180929004015
IMEI: 355140-08-427787-5
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.1 Software version.

podrias pasarme link del archivo no puedo descarga del soporte
Go to the top of the page
 
+Quote Post
deltanegro
mensaje Jan 10 2019, 04:38 PM
Publicado: #55

Miembro del Clan
*

Grupo: Miembros
Mensajes: 7
Agradecimientos: 8
Registrado: 8-March 14
Miembro No.: 578,630



CITA(arath0727 @ Sep 10 2018, 05:10 PM) *
estoy en prceso de probar con un zvb enseguida les comento que resulto



MI EQUIPO ERA UN LG-LS993ZVB con parche 01 Mayo 2018 crei que se moriria solo se habilito OEM y USB se reviso
que no tuviera alguna cuenta y se procedio a darle flash es demorado pero quedo full con datos 4G LTE sin problemas
sin problemas
Go to the top of the page
 
+Quote Post
mlorefice
mensaje Feb 16 2019, 03:06 PM
Publicado: #56

Miembro del Clan
*

Grupo: Miembros
Mensajes: 9
Agradecimientos: 2
Registrado: 4-August 14
Miembro No.: 626,994



alguien a probado con un LS993ZVE ?? seguridad de 1 de diciembre 2018 ??

Mensaje modificado por mlorefice el Feb 16 2019, 03:07 PM
Go to the top of the page
 
+Quote Post
gladiador12
mensaje Feb 19 2019, 09:36 AM
Publicado: #57

Miembro del Clan
*

Grupo: Miembros
Mensajes: 116
Agradecimientos: 206
Registrado: 16-May 15
Desde: el salvador
Miembro No.: 717,846
Pais:sv


CITA(mlorefice @ Feb 16 2019, 02:06 PM) *
alguien a probado con un LS993ZVE ?? seguridad de 1 de diciembre 2018 ??




si sale hoy me yego uno con esta vercion y me arriesgue y sale de una dejo el log para dar fe que funciona

Welcome to Octoplus/Octopus Box LG Software version 2.9.2
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM224
Selected model: LS993
Reading info...
IMEI: 355140-08-xxxxxxx
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: HD58S181004001774
IMEI: 355140-08-xxxxxxx
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.2 Software version.
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a gladiador12 por su Colaboracion:
123alan123, avanza27, elpontys
elpontys
mensaje Mar 1 2019, 02:07 PM
Publicado: #58

Miembro del Clan
Icono de Grupo

Grupo: Miembro Clan V.I.P.
Mensajes: 51
Agradecimientos: 155
Registrado: 1-June 11
Desde: Hermosillo Sonora Mexico
Miembro No.: 216,236



CITA(gladiador12 @ Feb 19 2019, 07:36 AM) *
si sale hoy me yego uno con esta vercion y me arriesgue y sale de una dejo el log para dar fe que funciona

Welcome to Octoplus/Octopus Box LG Software version 2.9.2
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM224
Selected model: LS993
Reading info...
IMEI: 355140-08-xxxxxxx
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: HD58S181004001774
IMEI: 355140-08-xxxxxxx
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.2 Software version.



confirmado el metodo funciona para esas versiones, no se ocupó hacer hard reset..
Go to the top of the page
 
+Quote Post
letylt961
mensaje Mar 11 2019, 09:29 PM
Publicado: #59

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 0
Registrado: 6-September 18
Miembro No.: 1,068,530
Pais:vn


CITA(gladiador12 @ Feb 19 2019, 09:36 PM) *
si sale hoy me yego uno con esta vercion y me arriesgue y sale de una dejo el log para dar fe que funciona

Welcome to Octoplus/Octopus Box LG Software version 2.9.2
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM224
Selected model: LS993
Reading info...
IMEI: 355140-08-xxxxxxx
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: HD58S181004001774
IMEI: 355140-08-xxxxxxx
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.2 Software version.

you can share LS993zva_to_H87315d_for_unlock.oct to me
Go to the top of the page
 
+Quote Post
stivensoft
mensaje Mar 30 2019, 03:37 PM
Publicado: #60

Miembro del Clan
*

Grupo: Miembros
Mensajes: 256
Agradecimientos: 215
Registrado: 3-February 12
Miembro No.: 303,745



Testeado 100% en version ZVF

Checking data...OK
Platform: LG Qualcomm
Selected port: COM330
Selected model: LS993
Reading info...
IMEI: 355140-08-3
Android version: 8.0.0
Battery level: 37%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180919000309
IMEI: 355140-08-38
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.2 Software version.
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a stivensoft por su Colaboracion:
ald360, enzo34j
norman22
mensaje Apr 16 2019, 03:47 AM
Publicado: #61

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,144
Agradecimientos: 519
Registrado: 5-September 08
Desde: HONDURAS, San Pedro Sula
Miembro No.: 5,893
Pais:hn


100% en version ZVF delen sin miedo.

-----------
Platform: LG Qualcomm
Selected port: COM141
Selected model: LS993
Reading info...
IMEI: 355140-08-369961-6
Android version: 8.0.0
Battery level: 56%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914004154
IMEI: 355140-08-369961-6
Target operator: SPR
Hardware: rev_10
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM141
Selected model: LS993
Reading info...
IMEI: 355140-08-369961-6
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914004154
IMEI: 355140-08-369961-6
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any
installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your
computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.3 Software version.

Mensaje modificado por norman22 el Apr 16 2019, 03:54 AM
 


--------------------
"Las mentes brillantes manejan ideas; las mentes corrientes hablan de actualidades; las mentes mediocres hablan de los demás."
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a norman22 por su Colaboracion:
Alonsorq11

2 Páginas: V  < 1 2
Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 24th April 2019 - 07:04 PM