ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
A510m Bit 7 Frp Android Version 7.0
jcmobiles
mensaje Jul 15 2019, 05:39 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 52
Agradecimientos: 284
Registrado: 3-June 10
Desde: GB
Miembro No.: 107,903
Pais:ad


Con octopus seleccionar sm-A510m
Dar en FRP Reactivation y opcion via UART.
se ocupa cable UART (use z3x de interface y cable uart de z3x) y cable USB.

Platform: Samsung Android
Selected port: COM5
Selected model: SM-A510M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.8.0.1 Software version.

Mensaje modificado por LAB_SANTACRUZ el Apr 29 2020, 10:37 PM
Motivo de edición: muevo a subforo samsung por que uso dos herramientas.


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 20 usuario(s) le Agradece(n) a jcmobiles por su Colaboracion:
alberto7891, bboydannycat, charfis2000, chechereche, Danoel11Alejand, Elduro2002, Evans, ever231716, fedemile, glen1702, gore, gunyt, jessua, Killerfast, maismen, manferd, motursa, Odin167, wako2806, wichop
Anunciante Autorizado
mensaje Jul 15 2019, 05:39 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
pepoxxx
mensaje Apr 15 2020, 06:10 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 114
Agradecimientos: 49
Registrado: 10-November 10
Desde: Venezuela - Zulia
Miembro No.: 150,001



Solo para complementar si funciona en Bit 7, me vi obligado a hacer este procedimiento porque no lo pude sacar de forma manual, ojo tienen que tener en celular bien cargado porque sino no lo detecta en modo Uart, drivers bien instalados.

Dejar el boton Vol abajo y Power presionados por 15 segundos, luego pide que conecten al usb, y luego hay que volver a conectarlo en Uart con vol abajo y Power, de ahi dice Done, luego le hacen un Hard Reset y wuala, como nuevo.
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a pepoxxx por su Colaboracion:
fedemile, frontlinecel
GANADOR567
mensaje Jun 10 2020, 05:57 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 4-May 20
Miembro No.: 1,170,451
Pais:pe


Selected model: SM-A510M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...

-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM29
Modelo seleccionado: SM-A510M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Telefono encontrado
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Buscando telefono. Por favor, espere...OK
Leyendo data...
Chequeando operacion...OK
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Telefono encontrado
Searching for UART interface.. COM5
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Telefono encontrado
Removiendo bloqueo FRP...success
FRP / Reactivation lock is successfully reseted!
Realizado con ayuda de 2.9.2 version de software
Go to the top of the page
 
+Quote Post
jessua
mensaje Dec 18 2020, 08:53 AM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 14
Agradecimientos: 1
Registrado: 23-May 13
Miembro No.: 474,021



Me saliò error pero segui los pasos tal cual y todo funcionò de maravilla me aparecio frp: off solo hice un hard reset y saliò bien sin problemas
Go to the top of the page
 
+Quote Post
gdandroid
mensaje Mar 1 2022, 10:32 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 24
Agradecimientos: 10
Registrado: 21-May 17
Desde: chivilcoy
Miembro No.: 954,056
Pais:ad


perfecto salió enseguida solo usando octoplus con el cable de z3x 619k
Go to the top of the page
 
+Quote Post
super raton
mensaje Jun 27 2022, 02:58 PM
Publicado: #6

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 363
Agradecimientos: 422
Registrado: 3-December 12
Desde: Buenos Aires
Miembro No.: 410,779



-----------------------------------------------------------------------------------
Sale ok con Octopus y usando z3x como interfase

Work ID: 000000000196524F
Platform: Samsung Android
Selected port: COM3
Selected model: SM-A510M
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock..success
FRP / Reactivation lock is successfully reseted!
Performed by 3.0.7 Software version.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 01:34 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +