alguien tiene el firmware de ls675 version ZVA o mayor no tiene baseband y creo que asi han salido varios
aqui esta
Para el caso de no encontrar la versión ZVA para este modelo y disponer de la ZV9....les informo que se puede degradar sin problemas...no daña el celular...dejo log:
Welcome to Octoplus/Octopus Box LG Software version 3.1.5
Work ID: 0000000001BD3A0A
Checking data...OK
Platform: LG Qualcomm
Selected port: COM147
Selected model: LS675
Reading info...
IMEI: 35xxxx-xx-xxxxxx-x
Android version: 5.1.1
Battery level: 48%
Mode: Emergency
Initializing flash...OK
Platform: msm8909
SW version: LS675ZVA_07
Android version: 5.1.1
LAF Version: 1.2
Product ID: C--1-------0030--
IMEI: 35xxxx-xx-xxxxxx-x
Target operator: SPR
Hardware: rev_10
--------------------------------------------------------------------------------
Writing phone firmware without real necessity is at your own risk.
Downgrade may lead to phone damage!
Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
--------------------------------------------------------------------------------
Opening "LS675ZV9_00.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Writing PrimaryGPT...OK
Writing modem...OK
Writing sbl1...OK
Writing tz...OK
Writing rpm...OK
Writing aboot...OK
Writing sbl1bak...OK
Writing tzbak...OK
Writing rpmbak...OK
Writing abootbak...OK
Writing sec...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing persist...OK
Writing laf...OK
Writing boot...OK
Writing recovery...OK
Writing factory...OK
Writing system...OK
Writing BackupGPT...OK
Reading partitions...OK
Formating RCT...OK
Formating MPT...OK
Finalizing...OK
Writing firmware done!
Performed by 3.1.5 Software version.
Potenciado por Invision Power Board
© Invision Power Services