ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Solicito Ayuda Blu Studio 5.5 C Se Queda En El Logo Blu Con Las Esferas De Colores.
carlosgomz
mensaje Oct 16 2018, 08:27 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 1
Registrado: 2-October 18
Miembro No.: 1,073,875
Pais:ve


Saludos, necesito ayuda con un dispositivo Blu Studio 5.5 C D690U después del logo de Blu con las esferas de colores se reinicia repitiendo las esferas con el Blu una y otra y otra vez y de allí no sale.

Ya le hice flash con Sp Flash v5 y v3 con la versión kit-kat 4.4.2 v2.10 sale perfecto el flash pero sigue igual.

Le aplique el wipe cache y el hard reset por medio del recovery y nada.

Intente instalar la rom por Adb (la verdad que es mi primera vez) por medios de vídeos de youtube pero daba error "Installation Aborted" el dispositivo.

Y por último intente instalar la rom por update Sdcard y no aparecen los archivos del Sd.

Necesito su ayuda y recomendaciones urgente para este dispositivo, se los agradezco por leerme.

Mensaje modificado por carlosgomz el Oct 16 2018, 08:28 AM
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Oct 16 2018, 08:27 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
karapacho27
mensaje Oct 16 2018, 08:38 AM
Publicado: #2

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 486
Agradecimientos: 313
Registrado: 8-March 13
Miembro No.: 444,826



prueba con un firmware que estes seguro que funcione, opcion full format+flash, lo otro es que tenga dañada la emmc por eso quede asi

saludos


--------------------
Herramientas: UFS/HWK, Setool full con LGTool y SgTool, HXC Dongle, Infinity Box Plus Pinfinder, Cyclone, MXBox, Polar Box 3, Z3X Pro, Sigmabox, Vygis, DC Unlocker, Scout Dongle, GSM Finder, NCK Dongle, Medusa, Octoplus LG
Go to the top of the page
 
+Quote Post
Norb3rto00
mensaje Oct 16 2018, 09:47 AM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 251
Agradecimientos: 1384
Registrado: 24-October 16
Desde: tehuacan puebla
Miembro No.: 888,235
Pais:mx


Hola compañeros !

Porque no pruebas a pasarle el firmware con nck !
Ya que muchas veces el falshtool no funciona correctamente,
incluso algunas veces hasta deja sin imei a los equipos !

Si no cuentas con nck, prueba con el crack igual puede servirte !

Saludos y recuerda que nada pierdes con probar !


--------------------
Mi Box / Sigma Full / Octopus Full / Chimeral Full / Z3x Full / Pandora Box / NCK Full / UMT Full / EFT Dongle Full /Miracle Thunder Full / Falcon Full / Furious Gold Full / Aqua Dongle / Hydra Tool Full / 🤔

El conocimiento es para compartirlo
con aquellos que hacen lo necesario para obtenerlo !

No todo es fácil y el aprendizaje tiene su precio !


Darme las gracias no cuesta nada !
Hazlo si es que pude aportar algo para ti ! 😏

Attm. Norberto V.J.
UnlockWorld MX
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Norb3rto00 por su Colaboracion:
carlosgomz
carlosgomz
mensaje Oct 17 2018, 01:30 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 1
Registrado: 2-October 18
Miembro No.: 1,073,875
Pais:ve


voy a probar con nck, muchas gracias por la ayuda.
Go to the top of the page
 
+Quote Post
RyuTk
mensaje Dec 29 2018, 02:50 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 13
Agradecimientos: 6
Registrado: 3-September 12
Desde: Habana-Cuba
Miembro No.: 380,542



Lo hice con NCK y me sigue haciendo lo mismo, he hecho todo hard reset, voy a probar con SPFlashTool le estoy pasando la flash MT6582__BLU_d690u__BLU STUDIO 5.5 C__4.4.2__ALPS.KK1.MP1.V2.10.
Go to the top of the page
 
+Quote Post
Dj Link
mensaje Dec 30 2018, 06:05 AM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 222
Agradecimientos: 458
Registrado: 24-July 17
Miembro No.: 972,498
Pais:ni


Puedes intentar hacer un memory test con SP Flash tool, podria ser que la memoria ya esta frizada y por eso no acepta flash o hard reset

Mensaje modificado por Dj Link el Dec 30 2018, 06:06 AM


--------------------
El que pregunta querer sabe, y el que le da click al botón "Dar Gracias" motiva al Clan.
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Dj Link por su Colaboracion:
mayuya06
pulgar
mensaje Nov 15 2019, 11:50 AM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 27
Agradecimientos: 17
Registrado: 22-September 19
Miembro No.: 1,141,887
Pais:cu


A mi me funcionó PERFECTO...

Marca: BLU
Múmero de modelo: BLU Studio 5.5 C (D690U | 01)
CPU: MediaTek 6582
IMEI[1, Software]: XXXXXXXXXXXXXXX
IMEI[1, Hardware]: XXXXXXXXXXXXXXX
IMEI[2, Software]: XXXXXXXXXXXXXXX
IMEI[2, Hardware]: XXXXXXXXXXXXXXX
Número de Serie: XXXXXXXXXXXXXX
XXX
Versión de Android: 4.4.2 (KitKat)
Versión de banda base: MOLY.WR8.W1315.MD.WG.MP.V34.P52, 2015/03/19 19:45
Versión de núcleo: 3.4.67
Número de compilación: ALPS.KK1.MP1.V2.10
Versión construida personalizada: BLU_D960U_V07_GENERIC
30-03-2015 18:35

Estado: dispositivo que llegó haciendo LOOP en el segundo LOGO de BLU, re reiniciaba constantemente. Presenta problemas en ambos botones del VOLUMEN, no fue posible acceder al Modo Recovery, por eso la solución fue realizarle Safe Flash.

Solución: NCK Dongle Android MTK v2.6.2.0

1- Realizar lectura (Boot Info), para identificar el dispositivo.

2- Realizar Backup Security ITEMS.

3- Realizar Backup NVRAM.

4- Realizar Safe Flash.

5- Una vez dentro del dispositivo realizar Wipe Reset.

LOGS...

Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.2
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: KOT49H
Display ID: ALPS.KK1.MP1.V2.10
Version: 4.4.2
Build Date: Mon Mar 30 18:45:38 CST 2015
Model: BLU STUDIO 5.5 C
Brand: BLU
Device: BLU STUDIO 5_5 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP1.V2.10
IMEI[1]:
IMEI[2]:
Wait untill phone will start charging.
[0]All done.

Exe version: NCKDongle AndroidMTK 2.6.2
Selected phone: MT6582
Action: Backup security items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: KOT49H
Display ID: ALPS.KK1.MP1.V2.10
Version: 4.4.2
Build Date: Mon Mar 30 18:45:38 CST 2015
Model: BLU STUDIO 5.5 C
Brand: BLU
Device: BLU STUDIO 5.5 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP1.V2.10
IMEI[1]:
IMEI[2]:
Dumping security....
Dumping Preloader.
Reading nvram
Dumping PRELOADER RAW.
Reading: BEGIN: 0x0 - LEN: 0xc00000
Dumping SEC_RO
Reading: BEGIN: 0x4980000 - LEN: 0x600000
Partition: PRELOADER
Partition: MBR
Partition: EBR1
Partition: PRO_INFO
Partition: NVRAM
Partition: PROTECT_F
Partition: PROTECT_S
Partition: SECCFG
Partition: UBOOT
Partition: BOOTIMG
Partition: RECOVERY
Partition: SEC_RO
Partition: MISC
Partition: LOGO
Partition: EXPDB
Partition: ANDROID
Partition: CACHE
Partition: USRDATA
Partition: BMTPOOL
Saved to :
Wait untill phone will start charging.
[0]All done.


Exe version: NCKDongle AndroidMTK 2.6.2
Selected phone: MT6582
Action: Backup NVRAM Meta Mode
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[6]Detected: MediaTek PreLoader USB VCOM (Android) (COM6)
\\?\usb#vid_0e8d&pid_2000#5&d27efef&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[41]META Port Detected: MediaTek USB VCOM (Android) (COM41)
USB\VID_0E8D&PID_2007\5&D27EFEF&0&3
Start sync target, waiting responce.....
ChipID: MT6582,S01
Using Algo 1.
Brand: BLU
Board: BLU STUDIO 5.5 C
Model: BLU STUDIO 5.5 C
Name: BLU STUDIO 5.5 C
Release: ALPS.KK1.MP1.V2.10
Version: 4.4.2
Platform: MT6582
NVRAM Dumped OK.
[0]All done.

Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6582
Exe version: NCKDongle AndroidMTK 2.6.2
Scenario: [0]Safe Flash
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Backup preloader saved in firmware directory.
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.


Por cierto, esta es la 3ra vez que se le realiza el FLASH, el procedimiento lo hace bien, pero cada cierto tiempo, vuelve al LOGO, le dije al cliente que se deshaga de él, o si no... siempre que vuelva tendrá que pagar...
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 04:07 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +