poner edl y seleccionar A526U BIT H
Device : Samsung Galaxy A52 5G (SM-A526U) BIT-H
Operation : Samsung Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1301600 [SM7225] 00002000
OPK_DATA : 62850AA7C517598FE16990CCD772657F10EEA96B2BBC12188F7C342A69CB0314
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A526U BIT-H.ufl]
Preparing Loader...Done
Sending Loader [SM-A526U BIT-H]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM7225, UFS, 128 GB
LU Count : 6 [0x01DB0800] [0x00000800] [0x00000800] [0x00000400] [0x00018000] [0x00000C00]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK [79]
Reading Device Information...OK
Software : UP1A.231005.007.A526WVLSHGYC1, A526WVLSHGYC1 [Tue Mar 11 18:43:11 KST 2025]
Android Ver. : 14
Patch Level : 2025-03-01
boot.os_ver : 11
boot.sec_patch : 2025-03-01
sys.os_ver : 14
sys.sec_patch : 2025-03-01
vendor.os_ver : 11
vendor.sec_patch : 2025-03-01
Reset FRP... Done
Potenciado por Invision Power Board
© Invision Power Services