Pasos a seguir
1 Tener los driver instalador
2 EL Movil debe estar apado y oprimes vol - + power al mismo tiempo.
3 Cuando estamos en la carpeta donde se encuentar el fasboot presionas alt+ boton derecho del mouse y te aprecera el modo de comandos.
4 Introduces los comandos.
Para windows anterios a Windows 10
Winxp,win7
Comandos a traves de fasboot
fastboot oem fb_mode_set
fastboot -w
fastboot oem fb_mode_clear
fastboot reboot
En windows 10
Comandos a traves de fasboot
.\fastboot oem fb_mode_set
.\fastboot -w
.\fastboot oem fb_mode_clear
.\fastboot reboot
Aqui les dejo un log del proceso al poner los comandos.
C:\flasheo\adb>fastboot oem fb_mode_set
...
OKAY [ 0.005s]
finished. total time: 0.006s
C:\flasheo\adb>fastboot -w
erasing 'userdata'...
OKAY [ 0.082s]
formatting 'userdata' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.014s]
erasing 'cache'...
OKAY [ 0.015s]
formatting 'cache' partition...
Erase successful, but not automatically formatting.
File system type raw not supported.
OKAY [ 0.015s]
finished. total time: 0.126s
C:\flasheo\adb>fastboot oem fb_mode_clear
...
OKAY [ 0.005s]
finished. total time: 0.006s
C:\flasheo\adb>fastboot reboot
rebooting...
finished. total time: 0.006s
Agradecer no cuesta nada.
Nuevos códigos para restablecer señal después de hacer FRP
fastboot oem fb_mode_set
fastboot erase modemst1
fastboot erase modemst2
fastboot erase userdata
fastboot erase cache
fastboot oem config bootmode
fastboot oem fb_mode_clear
fastboot reboot
fastboot oem fb_mode_set
fastboot -w
fastboot oem fb_mode_clear
fastboot reboot
Potenciado por Invision Power Board
© Invision Power Services