ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Aporte Frp De Samsung Sm-g928t S6 Edge Plus Parche De Seguridad Enero 2018
retinto1
mensaje Jan 29 2018, 05:46 PM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 34
Registrado: 15-November 14
Desde: GB
Miembro No.: 658,980
Pais:ad


frp en android 7.0 nueva seguridad enero 2018. sin flashes ni nada
, basta con tener el cel apagado, en la pestaña unlock seleccionar Reset FRP UFS y seguir las intrucciones, el celular se conecta apagado y con cable UART


UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Reset FRP UFS
Selected model: SM-G928T
Selected port: COM3 Z3X BOX Serial Port
Software version: 30.5

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM3 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G928T)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.30.5


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a retinto1 por su Colaboracion:
chinoperez, JoelSolutions29, ronalddj
Anunciante Autorizado
mensaje Jan 29 2018, 05:46 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
gcastillo9
mensaje Apr 8 2018, 06:36 PM
Publicado: #2

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 430
Agradecimientos: 1696
Registrado: 14-February 09
Desde: Tlapacoyan Veracruz, México.
Miembro No.: 22,429



A mi me salio como dice el compañero, me salio en el segundo intento, porque al primero me decía que no coincidía el modelo!

Lo hice con version 7.0 y binario 5 sin ningun problema de Tmobile.

Operation: Reset FRP UFS
[ 08/04/2018 06:10:00 p.m. ] Selected model: SM-G928T
[ 08/04/2018 06:10:00 p.m. ] Software version: 31.0
[ 08/04/2018 06:10:00 p.m. ]
[ 08/04/2018 06:10:00 p.m. ] Port not selected
[ 08/04/2018 06:10:00 p.m. ]
[ 08/04/2018 06:10:00 p.m. ] Operation: Reset FRP UFS
[ 08/04/2018 06:10:00 p.m. ] Selected model: SM-G928T
[ 08/04/2018 06:10:00 p.m. ] Selected port: COM12 Z3X BOX Serial Port
[ 08/04/2018 06:10:00 p.m. ] Software version: 31.0
[ 08/04/2018 06:10:00 p.m. ]
[ 08/04/2018 06:10:00 p.m. ] Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
[ 08/04/2018 06:10:00 p.m. ] Checking phone at COM12 OK
[ 08/04/2018 06:11:00 p.m. ] Phone detected, do not release 'Vol down'
[ 08/04/2018 06:11:00 p.m. ] Reading data from phone... OK
[ 08/04/2018 06:11:00 p.m. ] Release 'Vol down' now
[ 08/04/2018 06:11:00 p.m. ] Comparing selected model... model mismatch ()
[ 08/04/2018 06:11:00 p.m. ]
[ 08/04/2018 06:12:00 p.m. ] Operation: Reset FRP UFS
[ 08/04/2018 06:12:00 p.m. ] Selected model: SM-G928T
[ 08/04/2018 06:12:00 p.m. ] Selected port: COM12 Z3X BOX Serial Port
[ 08/04/2018 06:12:00 p.m. ] Software version: 31.0
[ 08/04/2018 06:12:00 p.m. ]
[ 08/04/2018 06:12:00 p.m. ] Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
[ 08/04/2018 06:12:00 p.m. ] Checking phone at COM12 OK
[ 08/04/2018 06:13:00 p.m. ] Phone detected, do not release 'Vol down'
[ 08/04/2018 06:13:00 p.m. ] Reading data from phone... error (2)
[ 08/04/2018 06:13:00 p.m. ]
[ 08/04/2018 06:14:00 p.m. ] Operation: Reset FRP UFS
[ 08/04/2018 06:14:00 p.m. ] Selected model: SM-G928T
[ 08/04/2018 06:14:00 p.m. ] Selected port: COM12 Z3X BOX Serial Port
[ 08/04/2018 06:14:00 p.m. ] Software version: 31.0
[ 08/04/2018 06:14:00 p.m. ]
[ 08/04/2018 06:14:00 p.m. ] Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
[ 08/04/2018 06:14:00 p.m. ] Checking phone at COM12 OK
[ 08/04/2018 06:14:00 p.m. ] Phone detected, do not release 'Vol down'
[ 08/04/2018 06:14:00 p.m. ] Reading data from phone... OK
[ 08/04/2018 06:14:00 p.m. ] Release 'Vol down' now
[ 08/04/2018 06:14:00 p.m. ] Comparing selected model... match (G928T)
[ 08/04/2018 06:14:00 p.m. ] Setup connection... OK
[ 08/04/2018 06:14:00 p.m. ] Reseting FRP... OK
[ 08/04/2018 06:14:00 p.m. ] Rebooting phone... OK
[ 08/04/2018 06:14:00 p.m. ] Reset FRP done

My best regards!

Go to the top of the page
 
+Quote Post
charlie_jro
mensaje Jul 17 2018, 01:39 PM
Publicado: #3

Miembro del Clan
*

Grupo: Miembros
Mensajes: 55
Agradecimientos: 208
Registrado: 10-January 13
Miembro No.: 422,704




CON LA OPTOPLUS SALE DE UNA CON UART CABLE (RJ45) BINARIO 5

PONER EL CEL MODO FLASH CONECTAR EL CABLE MICRO USB (V8)
POWER Y VOLUMEN ABAJO SALE EN 1 SEGUNDO
Go to the top of the page
 
+Quote Post
cellphonevalle
mensaje May 21 2019, 11:18 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 109
Agradecimientos: 134
Registrado: 12-June 17
Desde: jamundi
Miembro No.: 960,358
Pais:co


insisti varias veces por q me daba error modelo incorrecto, insisti como 6 veces
Go to the top of the page
 
+Quote Post
celcen
mensaje Aug 8 2019, 11:40 AM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 226
Agradecimientos: 326
Registrado: 2-April 10
Desde: El Salvador
Miembro No.: 94,356
Pais:sv


En mi caso no funcionaba el puerto de carga, utilice una aplicación que se llama hushsms para enviar un mensaje de texto y desde allí entrar a youtube, los demás pasos son conocidos. Probado en android 7.0


--------------------
[font="Trebuchet MS"][/font] El Conocimiento es Poder[color="#696969"][/color]
Go to the top of the page
 
+Quote Post
yasmanysensei
mensaje Aug 20 2019, 02:13 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 276
Agradecimientos: 420
Registrado: 2-November 17
Desde: cuba santa clara
Miembro No.: 1,000,227
Pais:cu



amigo como bien dices estube buscando porque el mio tambien tenia el puerto dañado y el cliente no queria cambiarlo asi que les dejo mi granito de arena
les dejo la informacion aqui
agradecer no cuesta nada

Mensaje modificado por yasmanysensei el Aug 20 2019, 02:14 PM
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a yasmanysensei por su Colaboracion:
johand10
JoelSolutions29
mensaje Aug 27 2019, 11:16 AM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 35
Agradecimientos: 6
Registrado: 10-May 19
Miembro No.: 1,116,643
Pais:do


CITA(retinto1 @ Jan 29 2018, 05:46 PM) *
frp en android 7.0 nueva seguridad enero 2018. sin flashes ni nada
, basta con tener el cel apagado, en la pestaña unlock seleccionar Reset FRP UFS y seguir las intrucciones, el celular se conecta apagado y con cable UART
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Reset FRP UFS
Selected model: SM-G928T
Selected port: COM3 Z3X BOX Serial Port
Software version: 30.5

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM3 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G928T)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.30.5

Comprobado funciona a la perfección en BIT6 solo basta con conectar el móvil apagado y con el cable UART seguir las intrusiones de la box y ella hará el resto

 
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a JoelSolutions29 por su Colaboracion:
chinoperez
Albersong1008
mensaje Oct 19 2019, 09:18 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 26-August 19
Miembro No.: 1,137,053
Pais:do


efectivamente colegas acabo de sacar uno bit 6 con el combination y luego frp tool de octoplus, ya solo toca flashar stock rom y listo
Go to the top of the page
 
+Quote Post
cybercentral
mensaje Nov 5 2019, 07:54 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 11
Agradecimientos: 17
Registrado: 13-November 13
Miembro No.: 537,115



Excelente!! me lo desbloqueó en solo unos segundos!!
Samsung G928A
Android 7
Seguridad 2017
Samsung TOOL Pro version 37.0
Gracias!!

CITA(retinto1 @ Jan 29 2018, 05:46 PM) *
frp en android 7.0 nueva seguridad enero 2018. sin flashes ni nada
, basta con tener el cel apagado, en la pestaña unlock seleccionar Reset FRP UFS y seguir las intrucciones, el celular se conecta apagado y con cable UART
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.

To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.

To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.

To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

To reset Google account activation lock with UART cable:
1. Phone must be powered off
2. Connect the phone to UART cable.
3. Select correct COM port in port settings.
4. Press 'Reset FRP UFS' and follow the instructions in program.

Operation: Reset FRP UFS
Selected model: SM-G928T
Selected port: COM3 Z3X BOX Serial Port
Software version: 30.5

Hold 'Vol down' and press 'POWER ON' for 2-3 seconds
Checking phone at COM3 OK
Phone detected, do not release 'Vol down'
Reading data from phone... OK
Release 'Vol down' now
Comparing selected model... match (G928T)
Setup connection... OK
Reseting FRP... OK
Rebooting phone... OK
Reset FRP done

Done with Samsung Tool PRO v.30.5

Go to the top of the page
 
+Quote Post
johand10
mensaje Dec 9 2019, 11:06 AM
Publicado: #10

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 4
Agradecimientos: 2
Registrado: 5-September 17
Miembro No.: 984,543
Pais:ve


CITA(charlie_jro @ Jul 17 2018, 02:39 PM) *
CON LA OPTOPLUS SALE DE UNA CON UART CABLE (RJ45) BINARIO 5

PONER EL CEL MODO FLASH CONECTAR EL CABLE MICRO USB (V8)
POWER Y VOLUMEN ABAJO SALE EN 1 SEGUNDO



amigo intente hacerlo y me da error y tengo que actualizar el equipo , peero me sigue pidiendo el correo
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a johand10 por su Colaboracion:
jorgetoledomenc
ImportTech
mensaje Aug 31 2021, 10:38 AM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 43
Agradecimientos: 9
Registrado: 8-March 13
Desde: Lima
Miembro No.: 444,853



creo que lo mate.....

le meti directo "Reste FRP/Resct/FF" directo a un samsung s6 edge plus de Tmobile

removio el frp segun z3x ,pero tambien me lo mato ya que no logro que ni lel Smart switch lo reconozca.... sale como

"failed to connect the device" ya cambie cable, saque la bateria, probe otro puerto usb...

creo que lo mate... alguna ayuda ??

Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 07:36 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +