Quitar Patron Y Cuenta A J510mn |
Bienvenido, invitado ( Identificarse | Registrarse )
Quitar Patron Y Cuenta A J510mn |
Apr 23 2018, 02:20 PM
Publicado:
#1
|
|
Miembro del Clan Grupo: Miembros Mensajes: 134 Agradecimientos: 376 Registrado: 19-March 18 Desde: GB Miembro No.: 1,032,655 Pais: |
ALGO CURIOSO YA QUE ME LLEGO UN J510MN PARA QUITAR BLOQUEO DE PANTALLA Y FRP LO QUE HICE FUE ASI COMO ESTABA EN Z3X SELECCIONE J510UN Y EN MODO DESCARGA LE DI RESET FRP/REACT/EE Y CUANDO PRENDIO PRENDIO SIN NINGUN BLOQUEO BUENO ESTO LO SUBO CON TAL DE QUE LO VEAN ASI NO PIERDEN MUCHO TIEMPO Y LO ASEN MAS RAPIDO
UNLOCK INSTRUCTIONS: Unlocking with original MSL code: Warning! Knox warranty must be active (0x00)! If you have it voided (0x01(void)), then you can't unlock this phone with MSL. 1. Phone must be powered on. 2. Run dialer and type *#0*# (service mode will appear). 3. Connect the phone to UART cable, choose correct COM port in port settings. 4. Press 'Unlock' button. 5. Paste MSL code in new opened window and press 'OK'. Reading codes using sever: 1. Power on the phone. 2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options', go to 'Settings'-'Developer options' and enable 'USB debugging'. 3. Connect the phone to PC with USB cable, install drivers if needed. 4. Select device in ADB settings. 5. Press 'Read Codes via server' button, write your login and password in window if it will appear. (Login and password will be saved as default after first input and can be changed in settings.) To reset Google account activation lock: 1. ADB must be activated in any way (you can flash sBoot from combination firmware, make sure, that you are not upgrade sBoot). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Select device in ADB settings. 4. Press 'Reset FRP' and follow the instructions in program. 5. When process done, press 'Back' on phone and perform factory reset from phone settings. To reset Google account activation or Samsung reactivation lock: 1. Power on the phone in download mode (turn off phone, press vol.down + home + power). 2. Connect the phone to PC with USB cable, install drivers if needed. 3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock. 4. After phone reboot, go to settings and perform factory reset. Operation: Reset FRP/React/EE Selected model: SM-J510UN Software version: 31.0 Searching Samsung USB Flash interface... COM595 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.0 -------------------- |
|
|
A continuacion 5 usuario(s) le Agradece(n) a ESTEBAN98 por su Colaboracion: ajito17, Delmer Lopez, eduardo loayza, fitoguille, VENADOUNLOCKER |
Anunciante Autorizado |
Apr 23 2018, 02:20 PM
Publicado:
#
|
Estas ofertas pudieran interesarte. |
|
|
|
Jul 10 2018, 04:52 PM
Publicado:
#2
|
|
Miembro del Clan Grupo: Miembros Mensajes: 22 Agradecimientos: 40 Registrado: 30-October 08 Miembro No.: 10,508 |
Salió impecable! lo que si tengo que decir que me borró todos los datos, muchas gracias colega
Mensaje modificado por fitoguille el Jul 10 2018, 04:55 PM |
|
|
A continuacion 1 usuario(s) le Agradece(n) a fitoguille por su Colaboracion: ajito17 |
Aug 15 2018, 10:43 PM
Publicado:
#3
|
|
Miembro del Clan Grupo: Miembros Mensajes: 192 Agradecimientos: 302 Registrado: 15-October 15 Miembro No.: 762,366 Pais: |
Yo quite Cuenta Samsung con tu Aporte
Operation: Reset FRP/React/EE Selected model: SM-J510UN Software version: 31.1 Searching Samsung USB Flash interface... COM4 detected Setup connection... OK Reading PIT from phone... OK Searching FRP lock... OK Erasing FRP lock... OK Reset done For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset' Done with Samsung Tool PRO v.31.1 |
|
|
Ver Visitas | Fecha y Hora actual: 18th April 2024 - 05:55 AM |