ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Aporte: Reparacion Ixxx Redmi 9a Umt Solucion.
kct-454
mensaje Apr 28 2021, 12:11 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 5
Agradecimientos: 10
Registrado: 15-August 12
Desde: ESMERALDAS
Miembro No.: 374,187



Hola amigos por aun no suben solucion serial para redmi 9a via UMT Dongle.

1)Primero solo Format NVDATA/NVRAM.
Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 76.43k ) Número de descargas: 0

Operation : Format NVRAM/NVDATA
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM63)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Platform : MT6765
Board : dandelion
Platform : mt6765
Userdata is ENCRYPTED
Formatting NVRAM...
- Done.
Formatting NVDATA...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.1]

2) Escribir serie y selecionar Xiami method y reparar ojo no cambia la seria en el dispositivo pero queda full señal.
Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 73.47k ) Número de descargas: 0

Operation : IMEI Reapir [Xiaomi Method]
Checking for existing META ports...
No existing META port found.
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Found MediaTek USB Port (COM63) on COM63
Device Path : usb\vid_0e8d&pid_0003&rev_0100
Mode : BROM
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek USB VCOM (Android) (COM86) on COM86
Device Path : \\?\usb#vid_0e8d&pid_200e#swlv9lr4n7xwdauc#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Configuring Communication Channel...
Reading phone information...
CPU : MT6765
SW Ver. : MOLY.LR12A.R3.MP.V107.5.P61
HW Ver. : LCSH_Q0MP1_MT6762_SP_HW
IMEI1 : 151515151515151
IMEI2 : 151515151515151
Reading data from phone...
- Done!
Repairing IMEI2 as XXXXXXXXXXX7808...
- Success!
Syncing Data...
- Success!
Operation Finished.
[UltimateMTK Ver. 4.1]

Mensaje modificado por LAB_SANTACRUZ el Sep 24 2021, 10:39 AM
Motivo de edición: suba las imagenes directas al servidor de clangsm, como archivos adjunto(no las suba a servidores externos por que las quitan y queda error de imagen cortada)
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a kct-454 por su Colaboracion:
Daniel V., EnriqueVP, gatonegro850619, glen1702, yasielcfg
Anunciante Autorizado
mensaje Apr 28 2021, 12:11 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
bstr
mensaje Apr 29 2021, 01:23 AM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 221
Agradecimientos: 109
Registrado: 23-August 20
Desde: Usa
Miembro No.: 1,186,465
Pais:pe


solo repara el imei 2, alguna forma de reparar ambos.?


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a bstr por su Colaboracion:
MUNDODJR
Ragoa
mensaje Jun 21 2021, 06:11 PM
Publicado: #3

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 23
Agradecimientos: 3
Registrado: 30-November 19
Miembro No.: 1,152,931
Pais:ad


CITA(kct-454 @ Apr 28 2021, 12:11 AM) *
Hola amigos por aun no suben solucion serial para redmi 9a via UMT Dongle.

1)Primero solo Format NVDATA/NVRAM.
Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 76.43k ) Número de descargas: 0

Operation : Format NVRAM/NVDATA
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM63)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Platform : MT6765
Board : dandelion
Platform : mt6765
Userdata is ENCRYPTED
Formatting NVRAM...
- Done.
Formatting NVDATA...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.1]

2) Escribir serie y selecionar Xiami method y reparar ojo no cambia la seria en el dispositivo pero queda full señal.
Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 73.47k ) Número de descargas: 0

Operation : IMEI Reapir [Xiaomi Method]
Checking for existing META ports...
No existing META port found.
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Found MediaTek USB Port (COM63) on COM63
Device Path : usb\vid_0e8d&pid_0003&rev_0100
Mode : BROM
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek USB VCOM (Android) (COM86) on COM86
Device Path : \\?\usb#vid_0e8d&pid_200e#swlv9lr4n7xwdauc#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Configuring Communication Channel...
Reading phone information...
CPU : MT6765
SW Ver. : MOLY.LR12A.R3.MP.V107.5.P61
HW Ver. : LCSH_Q0MP1_MT6762_SP_HW
IMEI1 : 151515151515151
IMEI2 : 151515151515151
Reading data from phone...
- Done!
Repairing IMEI2 as XXXXXXXXXXX7808...
- Success!
Syncing Data...
- Success!
Operation Finished.
[UltimateMTK Ver. 4.1]


Si mi telefono solo trae bandeja para un chip, este metodo funciona=????
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a Ragoa por su Colaboracion:
gianluka2012
mixmix1980
mensaje Aug 3 2021, 10:19 AM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 3
Agradecimientos: 3
Registrado: 6-April 15
Miembro No.: 705,114
Pais:ad


CITA(Ragoa @ Jun 21 2021, 06:11 PM) *
Si mi telefono solo trae bandeja para un chip, este metodo funciona=????

colocale una rom global
Go to the top of the page
 
+Quote Post
jessman
mensaje Aug 11 2021, 05:56 PM
Publicado: #5

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 335
Agradecimientos: 1211
Registrado: 8-June 09
Desde: HGO MEXICO
Miembro No.: 41,273



CITA(mixmix1980 @ Aug 3 2021, 10:19 AM) *
colocale una rom global

podras decirme como flashear la ROM GLOBAL
ya que para hacerlo me pide desbloquear el bootloader, pero para hacerlo tengo que
introducir mi cta mi con datos y por logica ni puedo por que no da señal
espero compartas tu metodo
Go to the top of the page
 
+Quote Post
albercillo
mensaje Sep 20 2021, 11:26 AM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 29
Agradecimientos: 16
Registrado: 11-December 14
Miembro No.: 667,235



amigo me quedo sin baseband y no tengo respaldo ya le pase flash global fas ing y nada y cuando intento reparar con moden meta solo queda cargando en 79 y no pasa de ahi
Go to the top of the page
 
+Quote Post
misa86
mensaje Dec 11 2021, 04:13 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 187
Agradecimientos: 464
Registrado: 4-August 15
Desde: CD
Miembro No.: 741,970
Pais:mx


CITA(Ragoa @ Jun 21 2021, 05:11 PM) *
Si mi telefono solo trae bandeja para un chip, este metodo funciona=????

Amigo el sim 2 es el que viene habilitado en mi caso repare uno de telcel 1 sim y el sim dos es el que trae la bandeja por defecto
Go to the top of the page
 
+Quote Post
nokiadocs
mensaje Mar 4 2022, 07:31 PM
Publicado: #8

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 622
Agradecimientos: 496
Registrado: 7-October 11
Desde: Cuba
Miembro No.: 262,421



Aguien pudiera poner un backup que funcione, por favor.
Gracias

Mensaje modificado por nokiadocs el Mar 4 2022, 07:32 PM
Go to the top of the page
 
+Quote Post
youmother
mensaje Mar 5 2022, 12:37 AM
Publicado: #9

Sensei Supremo del Clan
*****

Grupo: Miembros
Mensajes: 2,567
Agradecimientos: 2484
Registrado: 14-May 11
Miembro No.: 210,434
Pais:li


CITA(nokiadocs @ Mar 4 2022, 07:31 PM) *
Aguien pudiera poner un backup que funcione, por favor.
Gracias


A que backup se refiere especificamente y con que fin ? a ver si le podemos colaborar...
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a youmother por su Colaboracion:
nokiadocs
nokiadocs
mensaje Mar 5 2022, 03:08 PM
Publicado: #10

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 622
Agradecimientos: 496
Registrado: 7-October 11
Desde: Cuba
Miembro No.: 262,421



CITA(youmother @ Mar 5 2022, 12:37 AM) *
A que backup se refiere especificamente y con que fin ? a ver si le podemos colaborar...


Tengo uno que no tiene imei ni numero de serie y me refiero al Redmi 9a, backup es para poner los de fabrica, cualquier cosa que escribo para reparar el original me pone letras y numeros.
Go to the top of the page
 
+Quote Post
gatonegro850619
mensaje Mar 16 2022, 03:11 PM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 86
Agradecimientos: 112
Registrado: 21-September 16
Desde: Holguin
Miembro No.: 876,454
Pais:cu


CITA(kct-454 @ Apr 28 2021, 01:11 AM) *
Hola amigos por aun no suben solucion serial para redmi 9a via UMT Dongle.

1)Primero solo Format NVDATA/NVRAM.
Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 76.43k ) Número de descargas: 0

Operation : Format NVRAM/NVDATA
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM63)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Platform : MT6765
Board : dandelion
Platform : mt6765
Userdata is ENCRYPTED
Formatting NVRAM...
- Done.
Formatting NVDATA...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.1]

2) Escribir serie y selecionar Xiami method y reparar ojo no cambia la seria en el dispositivo pero queda full señal.
Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 73.47k ) Número de descargas: 0

Operation : IMEI Reapir [Xiaomi Method]
Checking for existing META ports...
No existing META port found.
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM63
Port Name: MediaTek USB Port (COM63)
Path: \\?\usb#vid_0e8d&pid_0003#5&8635bca&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Found MediaTek USB Port (COM63) on COM63
Device Path : usb\vid_0e8d&pid_0003&rev_0100
Mode : BROM
Rebooting to META mode...
Waiting for phone in META mode...
Found MediaTek USB VCOM (Android) (COM86) on COM86
Device Path : \\?\usb#vid_0e8d&pid_200e#swlv9lr4n7xwdauc#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Configuring Communication Channel...
Reading phone information...
CPU : MT6765
SW Ver. : MOLY.LR12A.R3.MP.V107.5.P61
HW Ver. : LCSH_Q0MP1_MT6762_SP_HW
IMEI1 : 151515151515151
IMEI2 : 151515151515151
Reading data from phone...
- Done!
Repairing IMEI2 as XXXXXXXXXXX7808...
- Success!
Syncing Data...
- Success!
Operation Finished.
[UltimateMTK Ver. 4.1]



el segundo paso no me resultó, pues UMT no reparó el imei.
procedí de la siguiente manera:
1. Format NVRAM/NVDATA con la UMT. Tal y como explica el compañero.
2. Wipe Data desde recovery.
3. Conectar en modo brom y darle reboot meta con UMT.
4. Con NCK Dongle Módulo MTK reparar el imei 2, seleccionando modo meta exe
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a gatonegro850619 por su Colaboracion:
Blackhat
dislorth
mensaje Apr 16 2022, 12:30 PM
Publicado: #12

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 343
Agradecimientos: 223
Registrado: 11-February 11
Desde: Caracas, Venezuela
Miembro No.: 181,058
Pais:ve


CITA(gatonegro850619 @ Mar 16 2022, 04:11 PM) *
el segundo paso no me resultó, pues UMT no reparó el imei.
procedí de la siguiente manera:
1. Format NVRAM/NVDATA con la UMT. Tal y como explica el compañero.
2. Wipe Data desde recovery.
3. Conectar en modo brom y darle reboot meta con UMT.
4. Con NCK Dongle Módulo MTK reparar el imei 2, seleccionando modo meta exe


No funciona la reparación... la NCK finaliza el procedimiento correctamente, pero al encender el teléfono y marcar *#06# el teléfono continúa sin IMEI wacko.gif


--------------------

"Power is nothing without control"

Mis herramientas para unlock: Octoplus Box, Smart-Clip2, Z3X Box, BMX Dongle, ZZ-Key Dongle, Falcon Box, NCK PRO: "NCK Box + UMT Box", Unlock Tool, Chimera Tool PRO Dongle, Hydra Tool Dongle.
Go to the top of the page
 
+Quote Post
escaflowne117
mensaje Aug 29 2022, 09:42 AM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 5
Registrado: 9-March 14
Miembro No.: 578,829



Fichero Adjunto  Preloade... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 136.41k ) Número de descargas: 17


Mensaje modificado por LAB_SANTACRUZ el Sep 1 2022, 11:45 AM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a escaflowne117 por su Colaboracion:
JORGEGSM583

Reply to this topicStart new topic
3 usuario(s) está(n) leyendo este tema (3 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 06:16 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +