ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Huawei Id & Frp Nova Y70
charles_garcia
mensaje Sep 9 2022, 10:39 AM
Publicado: #1

Miembro del Clan
*

Grupo: Miembros
Mensajes: 18
Agradecimientos: 56
Registrado: 5-February 19
Desde: GB
Miembro No.: 1,098,873
Pais:hn


Hola, les dejo la eliminación de cuenta de Huawei Nova Y70 en su modelo MGA-LX3.
Abrir Chimera y hacer testpoint con el cable harmony o crear su cable con una resistencia 10K imagino ya todos saben eso.
No les detectara el modelo exacto asi que eligen el modelo AKA-AL10 Click en remover Huawei Account y dejar que termine el proceso puede tardar hasta 10 minutos en algunos casos.

Les dejo el LOG.
Chimera Mobile Phone Utility version: 33.25.1204 @ 2022-09-08
Removing Huawei account
Uploading data...
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The phone will automatically start factory reset, after that it might shut down. You need to turn on the phone afterwards.
IMPORTANT! Please do not connect your phone to the Internet (WiFi) and ensure there's no SIM-card present in the phone until you have completed the initial setup wizard!
Finished at local time: [09.08.22 16:52:48]
WorkID: 194646651


--------------------
Go to the top of the page
 
+Quote Post
Anunciante Autorizado
mensaje Sep 9 2022, 10:39 AM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
slipher
mensaje Sep 19 2022, 01:56 PM
Publicado: #2

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 322
Agradecimientos: 318
Registrado: 9-January 09
Desde: Veracruz
Miembro No.: 17,193
Pais:ad


Imagen del test point por favor...
Go to the top of the page
 
+Quote Post
glen1702
mensaje Sep 19 2022, 04:20 PM
Publicado: #3

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 302
Agradecimientos: 378
Registrado: 4-January 19
Miembro No.: 1,092,320
Pais:mx


Aquí lo dejo, compañero.
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
A continuacion 9 usuario(s) le Agradece(n) a glen1702 por su Colaboracion:
fabili1822, Jinxxfall, jorgezul, joserc, pika92, slipher, speedy_6447, tallercell, Yosoytoño
emymontoya
mensaje Sep 28 2022, 06:14 PM
Publicado: #4

Miembro del Clan
*

Grupo: Miembros
Mensajes: 34
Agradecimientos: 96
Registrado: 9-January 12
Miembro No.: 294,329



Full testeado, fácil y rápido, conectan testpoint, seleccionan modelo que indica el compañero y sin errores
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a emymontoya por su Colaboracion:
adolfoclan, tallercell
nestor gomez
mensaje Nov 5 2022, 01:43 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 138
Agradecimientos: 84
Registrado: 24-May 16
Miembro No.: 832,139
Pais:co


CITA(glen1702 @ Sep 19 2022, 04:20 PM) *
Aquí lo dejo, compañero.

muy bueno el aporte, pero el tespoint me dio con el punto de enseguida no con el que esta marcado, depronto algun compañero le pasa igual.
Go to the top of the page
 
+Quote Post
A continuacion 6 usuario(s) le Agradece(n) a nestor gomez por su Colaboracion:
alexrios, andrew713, manuel.1, ruli860619, tuningcell9, zaico12345
CASELY
mensaje Nov 18 2022, 08:16 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 61
Agradecimientos: 105
Registrado: 26-May 10
Desde: Ilo - Peru
Miembro No.: 106,081



sale con sigma tambien seleccionando kirin 710
 
Go to the top of the page
 
+Quote Post
A continuacion 12 usuario(s) le Agradece(n) a CASELY por su Colaboracion:
00douglas00, @lbert MR, chinoperez, crazycrazy, dc774, Fernan2112, Jinxxfall, josue2308, manuel.1, pika92, pika92, speedy_6447
rivera
mensaje Dec 3 2022, 10:38 AM
Publicado: #7

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 323
Agradecimientos: 685
Registrado: 1-February 13
Desde: chile
Miembro No.: 431,613



algún compañeros podría corroborar si nova y70 hay en MTK y KIRIN........


--------------------
un trabajo bien hecho siempre da valiosos frutos
Z3X PRO--OCTOPLUS PRO.LG.SAMSUNG.FRP--CHIMERA--SIGMA KEY--NCK--UMT--HCU--HYDRA TOOL--EMT--UNLOCK TOOL--EFT PTO[size="6"][/size]
Go to the top of the page
 
+Quote Post
edmino2033
mensaje Jan 6 2023, 06:03 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 0
Registrado: 7-May 22
Miembro No.: 1,238,106
Pais:pe


CITA(nestor gomez @ Nov 5 2022, 01:43 PM) *
muy bueno el aporte, pero el tespoint me dio con el punto de enseguida no con el que esta marcado, depronto algun compañero le pasa igual.

Me aparecia como dispositivo desconocido pero leí lo que comentaste y me reconoció enseguida.
Go to the top of the page
 
+Quote Post
danilojuarez
mensaje Jan 11 2023, 02:24 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 8
Agradecimientos: 6
Registrado: 2-May 20
Miembro No.: 1,170,204
Pais:gt


CITA(charles_garcia @ Sep 9 2022, 11:39 AM) *
Hola, les dejo la eliminación de cuenta de Huawei Nova Y70 en su modelo MGA-LX3.
Abrir Chimera y hacer testpoint con el cable harmony o crear su cable con una resistencia 10K imagino ya todos saben eso.
No les detectara el modelo exacto asi que eligen el modelo AKA-AL10 Click en remover Huawei Account y dejar que termine el proceso puede tardar hasta 10 minutos en algunos casos.

Les dejo el LOG.
Chimera Mobile Phone Utility version: 33.25.1204 @ 2022-09-08
Removing Huawei account
Uploading data...
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The phone will automatically start factory reset, after that it might shut down. You need to turn on the phone afterwards.
IMPORTANT! Please do not connect your phone to the Internet (WiFi) and ensure there's no SIM-card present in the phone until you have completed the initial setup wizard!
Finished at local time: [09.08.22 16:52:48]
WorkID: 194646651


Saliendo con SigmaKey Kirin 710 con tespoint cable harmony
Fichero(s) Adjunto(s)
 
Go to the top of the page
 
+Quote Post
Sevce
mensaje Feb 1 2023, 12:00 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 114
Agradecimientos: 69
Registrado: 21-April 09
Desde: Saltillo Mexico
Miembro No.: 33,318



CITA(rivera @ Dec 3 2022, 09:38 AM) *
algún compañeros podría corroborar si nova y70 hay en MTK y KIRIN........

Procesador kirin 710a
Go to the top of the page
 
+Quote Post
mkzafra
mensaje Feb 1 2023, 05:53 PM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 4
Agradecimientos: 0
Registrado: 24-July 13
Miembro No.: 496,375



Mi teléfono se prende cuando le doy a Remove FRP, evitando q la caja realice el proceso
Go to the top of the page
 
+Quote Post
chuchomix
mensaje Apr 27 2023, 07:16 PM
Publicado: #12

Miembro del Clan
*

Grupo: Miembros
Mensajes: 47
Agradecimientos: 111
Registrado: 15-January 09
Miembro No.: 18,034



CITA(nestor gomez @ Nov 5 2022, 12:43 PM) *
muy bueno el aporte, pero el tespoint me dio con el punto de enseguida no con el que esta marcado, depronto algun compañero le pasa igual.

asi es, el correcto es el de al lado
Go to the top of the page
 
+Quote Post
mijail
mensaje May 13 2023, 12:57 PM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 6
Agradecimientos: 5
Registrado: 21-July 12
Miembro No.: 365,334



lo intente con sigma pero me daba error con cable armony, lo intente con cable standar y salió de una. gracias
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a mijail por su Colaboracion:
MagiTec
cghond
mensaje Aug 26 2023, 11:59 AM
Publicado: #14

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 394
Agradecimientos: 380
Registrado: 28-March 16
Desde: Colonia Victoria
Miembro No.: 812,417
Pais:hn


agrego que la liberacion tambien la pueden hacer con chimera seleccionando el modelo que dice el amigo en el post numero 1 con cable harmony y con el testpoint correcto


--------------------
Se que te gustó y aún no me atrevo
Dame una señal para perder el miedo
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a cghond por su Colaboracion:
Reparacel SA
doctorsim
mensaje Sep 14 2023, 07:23 PM
Publicado: #15

Miembro del Clan
*

Grupo: Miembros
Mensajes: 184
Agradecimientos: 281
Registrado: 12-November 16
Miembro No.: 894,437
Pais:ad


a mi me dio test point con el punto del medio a tierra
Go to the top of the page
 
+Quote Post
A continuacion 9 usuario(s) le Agradece(n) a doctorsim por su Colaboracion:
aguicellbc, Alexistepaz, caarbmx, chinoperez, eduardoo, edwin velez, edyamaya2010, Fernan2112, pika92
DiegoRoot
mensaje Dec 7 2023, 02:15 PM
Publicado: #16

Miembro del Clan
*

Grupo: Miembros
Mensajes: 3
Agradecimientos: 3
Registrado: 10-June 16
Miembro No.: 838,263
Pais:gt


CITA(nestor gomez @ Nov 5 2022, 02:43 PM) *
muy bueno el aporte, pero el tespoint me dio con el punto de enseguida no con el que esta marcado, depronto algun compañero le pasa igual.

A mi también con el otro punto me dio saber a que se debe, lo bueno que si sale
Go to the top of the page
 
+Quote Post
edyamaya2010
mensaje Feb 15 2024, 11:04 AM
Publicado: #17

Miembro del Clan
*

Grupo: Miembros
Mensajes: 46
Agradecimientos: 34
Registrado: 7-November 11
Desde: honduras
Miembro No.: 273,447



CITA(doctorsim @ Sep 14 2023, 06:23 PM) *
a mi me dio test point con el punto del medio a tierra

exelente con el punto de en medio conecto para frp id y liberar con sigma
Go to the top of the page
 
+Quote Post
jorgezul
mensaje Feb 26 2024, 05:12 PM
Publicado: #18

Miembro del Clan
*

Grupo: Miembros
Mensajes: 64
Agradecimientos: 39
Registrado: 14-August 14
Desde: colombia
Miembro No.: 629,855



full sirvió en ese modelo pero en mi caso cunado prendió no entro al menú de una y en el logo de chimera dice que no conecte a wifi igual lo conecté y paso muy rápidamente entre al menú desactive wifi y volví a restablecer d fabrica
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
3 usuario(s) está(n) leyendo este tema (3 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 29th March 2024 - 08:32 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +