ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

 
Reply to this topicStart new topic
Lg Q610fs Frp Con Octoplus
todocel00
mensaje Jul 10 2020, 11:20 AM
Publicado: #1

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 646
Agradecimientos: 648
Registrado: 27-October 09
Desde: tamaulipas mexico
Miembro No.: 66,859
Pais:mx


Descargar la versión test del soporte de octoplus Welcome to Octoplus/Octopus Box LG Software version 3.0.2.04
Consume 100 creditos
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG MTK
Selected port: COM35
Selected baudrate: 0
Selected model: Q610FS
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable (with
910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect
USB cable.
Phone found at port COM35
Mode: Emergency
Initializing flash...OK
Model ID: LM-Q610FS
Platform: mt6750
Android version: 8.1.0
SW version: LMQ610FSAT-00-V10a-334-020-JUN-28-2018+3
LAF Version: 1.1
Product ID: YS92S180904000949
IMEI: 356521-++-++++++-+
Target operator: LAO
Hardware: rev_10
Battery level: 60%
Reading partitions...OK
Checking security...
Checking security passed!
--------------------------------------------------------------------------------
IMEI: 3565---------------
Bluetooth address: 00:57:C1:31:CF:96
Wi-Fi MAC address: 00:57:C1:DA:8A:87
SPC: 000000
--------------------------------------------------------------------------------
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: ********
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 200 credits.
To perform "Reset FRP" operation you need to have 100 credits.
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP Lock...OK
Initializing flash...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Resetting FRP lock successfully completed!
Performed by 3.0.2.04 Software version.


--------------------
[color="#FF0000"La Mafia Del Unlock"[/color]
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 01:42 PM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +