ClanGSM.com

Bienvenido, invitado ( Identificarse | Registrarse )

2 Páginas: V   1 2 >  
Reply to this topicStart new topic
Solucion Liberacion Ls993 Sprint
s_lito88
mensaje Mar 13 2018, 02:58 PM
Publicado: #1

Miembro del Clan
*

Grupo: Expulsados
Mensajes: 4
Agradecimientos: 58
Registrado: 20-October 12
Miembro No.: 395,981
Pais:ad


aqui la solucion para liberar el lg ls993 seguridad 1 de enero 2018 zva sin hacer brick

vamos a proceder a descargar estos archivos

1 primer paso instalar uppercut

2 segundo paso instalar lgup install 1.14

3 tercer paso sobre escribir lgup v20dll donde esta instalado uppercut

4 paso abrir lg up

5 paso buscar el kdz h87315c seleccionarlo

6 selecionar particiones


flahear y listo en telefono liberado full dato y full señal



no olviden agradecer

Mensaje modificado por s_lito88 el Mar 13 2018, 03:00 PM
 
Go to the top of the page
 
+Quote Post
A continuacion 15 usuario(s) le Agradece(n) a s_lito88 por su Colaboracion:
angel.sanchez24, browear2, cabuvis, candelaunlock, Cesar0005, CuBan0, Daymel, flipe, Gisb01, glen1702, kikxt, korea503sv, maxpatri9, merysorivel, san_leo
Anunciante Autorizado
mensaje Mar 13 2018, 02:58 PM
Publicado: #

Auspiciador de ClanGSM

Estas ofertas
pudieran interesarte.











Go to the top of the page
 
Quote Post
Fernando Reyes
mensaje Apr 6 2018, 05:14 PM
Publicado: #2

Miembro del Clan
*

Grupo: Miembros
Mensajes: 2
Agradecimientos: 29
Registrado: 6-March 18
Desde: El Salvador
Miembro No.: 1,029,271
Pais:ad


Bueno… me aventure a hacerlo y lo logre!!! Si funciona y acá les doy los pasos de cómo lo hice...

Se usan los siguientes 4 archivos:
DRIVERS DE LG: LGMobileDriver_WHQL_Ver_4.2.0
LGUP: LGUP_Store_Frame_Ver_1_14_3
PARCHE DE LGUP: LGUP_V20dll_Patched
ROM: H87315c_00_OPEN_CA_OP_1026.kdz

PASOS:
1. Instalamos los drivers de LG
2. Instalamos LGUP
3. Descomprimimos el parche LGUP_V20dll_Patched
4. Dentro del parche que acabamos de descomprimir encontraremos la carpeta “Model” y el archivo “LGUP.exe” los cuales debemos pegarlos en la ruta donde está instalado el programa LGUP y así sustituir los que ahí ya existen.
Generalmente la ruta donde está instalado es la siguiente: C:\Program Files (x86)\LG Electronics\LGUP
(Recomendación: Eliminar primero la carpeta y el archivo existente y luego pegar los nuevos)
5. Poner nuestro LG G6 en modo Download:
-Apagarlo
-Presionar botón de volumen +
-Conectarle cable USB a la PC
6. Abrir “LGUP.exe” (automáticamente reconocerá nuestro dispositivo LG G6)
7. Ya con LGUP abierto en la sección “File Path” elegir el kdz descargado: H87315c_00_OPEN_CA_OP_1026.kdz
8. Marcar la opción “PARTITION DL” y dar click en “Start”
9. A los pocos segundos de iniciado el proceso nos aparecerá una ventana emergente que se llama “Partition List” en la cual marcaremos la casilla de abajo “Select all” y le damos en OK (con esto marcaremos todas las particiones)
10. Luego nos aparecerá la última ventana emergente “LGUP Common” que nos preguntara lo siguiente: Partition(s) changed “Persist”, “System”, “cache”, “OP”, “Userdata”, Do you want continue? Cliqueamos YES
11. Empezara el proceso de Flasheo que se tardara aproximadamente 3 minutos. Esperar a que este proceso termine (A mí eso me demoro y use un puerto USB 3.0)
12. Cuando el proceso termine LGUP nos mostrara debajo de la columna “Step” el siguiente mensaje: “COMPLETE!...Click here to continue” y nuestro LG se reiniciara.
13. Desconectar nuestro LG G6 y listo iniciara Android por primera vez y lo configuraremos como un dispositivo nuevo.

*Nota: Acá un punto importante, en mi caso mi LG G6 al terminar de flashearlo quedo en bootloop, se reinició y se reinició constantemente sin parar.
Por lo que para sacarlo de ese modo es necesario realizarle también un reseteo de fábrica, así que si su dispositivo después de flashearlo pasa más de 15 minutos reiniciándose constantemente sin pasar del logo de LG es porque también quedo en bootloop, pero tiene solución!.

Y es ingresando al “Factory Data Reset” y aplicándole un reseteo de fábrica. Los pasos son los siguientes:

Presionar botón de encendido y bajar volumen al mismo tiempo, esperar a que se reinicie, luego soltar el botón de encendido y presionarlo 2 veces seguidas sin soltar el boton de bajar volumen. De esa forma ingresamos a la pantalla “Factory Data Reset” en la cual elegiremos “SI”.
Esperamos a que el proceso de formateo termine y eso es todo!.
¡Nuestro LG G6 quedara como nuevo, iniciara correctamente, cargara Android y quedara liberado de fábrica para todas las compañías! smile.gif

Ahhh una cosa más, mi LG G6 en Versión de software decía “LS993ZVA” pero en LGUP aparecía como “LS993ZV4”, pero a pesar de eso me funciono el flasheo.
Y si tienen dudas al respecto ya sea con el procedimiento o los archivos necesarios pueden enviarme un MP para poder ayudarles. wink.gif
Go to the top of the page
 
+Quote Post
melvogsm
mensaje Jun 25 2018, 04:44 PM
Publicado: #3

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 413
Agradecimientos: 704
Registrado: 20-December 11
Desde: san salvador
Miembro No.: 287,171
Pais:sv


mi experiencia con este modelo fue la siguiente del soporte de la octopus baje este archivo
LS993zva_to_H87315d_for_unlock.oct
luego procedí a darle flash con la caja se flasho sin problema alguno ni riesgo alguno
aquí están las

Welcome to Octoplus/Octopus Box LG Software version 2.8.6
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM6
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LS993ZV9_05
Android version: 7.0
LAF Version: 1.1
Product ID: PT03S170320001498
IMEI: 3XXXXX-08-XXXXXX-7
Target operator: SPR
Hardware: rev_10
Performed by 2.8.6 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.8.6 Software version.

Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 115.87k ) Número de descargas: 0

Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 108.33k ) Número de descargas: 0

Fichero Adjunto  3.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 179.61k ) Número de descargas: 0

Fichero Adjunto  5.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 46.43k ) Número de descargas: 0


--------------------















CLAN GSM MAS QUE UN FORUM ES UNA HERRAMIENTA MUY IMPORTANTE.[color="#0000FF"][/color]
Go to the top of the page
 
+Quote Post
norman22
mensaje Apr 16 2019, 03:47 AM
Publicado: #4

Maestro del Clan
***

Grupo: Miembros
Mensajes: 1,167
Agradecimientos: 552
Registrado: 5-September 08
Desde: GB
Miembro No.: 5,893
Pais:hn


100% en version ZVF delen sin miedo.

-----------
Platform: LG Qualcomm
Selected port: COM141
Selected model: LS993
Reading info...
IMEI: 355140-08-369961-6
Android version: 8.0.0
Battery level: 56%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914004154
IMEI: 355140-08-36996X-X
Target operator: SPR
Hardware: rev_10
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.9.3 Software version.

Fichero Adjunto  post_589... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 53.85k ) Número de descargas: 0


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 5 usuario(s) le Agradece(n) a norman22 por su Colaboracion:
Alonsorq11, dacel, joseses, kinglebzul, Miikel27
Tuxblack
mensaje May 20 2019, 04:32 PM
Publicado: #5

Miembro del Clan
*

Grupo: Miembros
Mensajes: 203
Agradecimientos: 594
Registrado: 27-December 08
Desde: GB
Miembro No.: 15,600
Pais:mx


con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)


--------------------
Go to the top of the page
 
+Quote Post
A continuacion 3 usuario(s) le Agradece(n) a Tuxblack por su Colaboracion:
Dante D Silva, guerreroL7, melgib
joseses
mensaje Jun 6 2019, 05:17 PM
Publicado: #6

Miembro del Clan
*

Grupo: Miembros
Mensajes: 37
Agradecimientos: 139
Registrado: 4-August 09
Miembro No.: 51,792



Alguien ya a probado para la version de software LS993ZVC

con seguridad de 1 de agosto 2018
Go to the top of the page
 
+Quote Post
100%Succefull
mensaje Jun 6 2019, 06:00 PM
Publicado: #7

Miembro del Clan
*

Grupo: Miembros
Mensajes: 35
Agradecimientos: 32
Registrado: 21-July 18
Miembro No.: 1,059,158
Pais:do


CITA(Tuxblack @ May 20 2019, 05:32 PM) *
con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)


Funcionan los datos?
Go to the top of the page
 
+Quote Post
CelularCris
mensaje Jun 6 2019, 06:54 PM
Publicado: #8

Miembro del Clan
*

Grupo: Miembros
Mensajes: 53
Agradecimientos: 117
Registrado: 2-November 15
Miembro No.: 767,529
Pais:mx


CITA(joseses @ Jun 6 2019, 05:17 PM) *
Alguien ya a probado para la version de software LS993ZVC

con seguridad de 1 de agosto 2018


En el soporte de octopus, hay un firmware para unlock, ahorita estoy haciendo uno.
Fichero(s) Adjunto(s)
 


--------------------
"Unlock World."
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a CelularCris por su Colaboracion:
eclipce300, eysco, joseses, markiraheta
CelularCris
mensaje Jun 6 2019, 07:38 PM
Publicado: #9

Miembro del Clan
*

Grupo: Miembros
Mensajes: 53
Agradecimientos: 117
Registrado: 2-November 15
Miembro No.: 767,529
Pais:mx


Listo y comprobado

CODE
version de software utilizada y degradar sin miedo
LS993zva_to_H87315d_for_unlock

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's
firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.5 Software version.
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVC-SPR-US-AUG-22-
2018-ARB00+12
Short firmware version: VZVC
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Wed Aug 22 15:18:43 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM47
Selected model: LS993
Reading info...
IMEI: 355140-08-377371-8
Android version: 8.0.0
Battery level: 69%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE04S180915001385
IMEI: 355140-08-377371-8
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.


Mensaje modificado por pablo76 el Nov 10 2019, 10:06 AM
Fichero(s) Adjunto(s)
 


--------------------
"Unlock World."
Go to the top of the page
 
+Quote Post
A continuacion 4 usuario(s) le Agradece(n) a CelularCris por su Colaboracion:
eclipce300, heavypako666, joseses, tresma
tresma
mensaje Jun 6 2019, 07:40 PM
Publicado: #10

Miembro del Clan
*

Grupo: Miembros
Mensajes: 1
Agradecimientos: 1
Registrado: 17-June 16
Miembro No.: 840,404
Pais:mx


CITA(CelularCris @ Jun 6 2019, 08:38 PM) *
Listo y comprobado

version de software utilizada y degradar sin miedo
LS993zva_to_H87315d_for_unlock

Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK


Que proceso seguiste, podrias explicarlo mas detalladamente por favor?

Mensaje modificado por pablo76 el Nov 10 2019, 10:07 AM
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a tresma por su Colaboracion:
eclipce300
joseses
mensaje Jun 7 2019, 05:36 PM
Publicado: #11

Miembro del Clan
*

Grupo: Miembros
Mensajes: 37
Agradecimientos: 139
Registrado: 4-August 09
Miembro No.: 51,792



Para complementar un poco mas el tema, dar gracias a los compañeros que se aventuraron, confirmo que la solucion funciona para la

version de software LS993ZVC con seguridad de 1 de agosto 2018.



Y agrego para el compañero tresma que el proceso que realice fue cargar el firmware del soporte, ser bastante paciente que tarda un poco

ya que inicia colocar el chip de cualquier compañia y listo telefono liberado. No hubo algun proceso extra. Servicio de datos correcto.



Agrego algunos datos extras para darle fortaleza al proceso.


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 622.88k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 662.24k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 661.15k ) Número de descargas: 0


Fichero Adjunto  20190607... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 714.2k ) Número de descargas: 0


Welcome to Octoplus/Octopus Box LG Software version 2.9.4
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM568
Selected model: LS993
Reading info...
IMEI:
Android version: 8.0.0
Battery level: 100%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVC_12
Android version: 8.0.0
LAF Version: 1.1
Product ID:
IMEI:
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.4 Software version.
Go to the top of the page
 
+Quote Post
A continuacion 6 usuario(s) le Agradece(n) a joseses por su Colaboracion:
Charly mov, Dante D Silva, daurisfco, eclipce300, gcastillo9, MaxiRock
Baphomet
mensaje Jun 11 2019, 07:57 PM
Publicado: #12

Miembro del Clan
*

Grupo: Miembros
Mensajes: 145
Agradecimientos: 222
Registrado: 27-February 18
Desde: Mi casa
Miembro No.: 1,027,481
Pais:mx


CITA(melvogsm @ Jun 25 2018, 04:44 PM) *
mi experiencia con este modelo fue la siguiente del soporte de la octopus baje este archivo
LS993zva_to_H87315d_for_unlock.oct
luego procedí a darle flash con la caja se flasho sin problema alguno ni riesgo alguno
aquí están las

Welcome to Octoplus/Octopus Box LG Software version 2.8.6
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM6
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...OK
SW version: LS993ZV9_05
Android version: 7.0
LAF Version: 1.1
Product ID: PT03S170320001498
IMEI: 3XXXXX-08-XXXXXX-7
Target operator: SPR
Hardware: rev_10
Performed by 2.8.6 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.8.6 Software version.

Fichero Adjunto  1.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 115.87k ) Número de descargas: 0

Fichero Adjunto  2.png... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 108.33k ) Número de descargas: 0

Fichero Adjunto  3.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 179.61k ) Número de descargas: 0

Fichero Adjunto  5.jpeg... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 46.43k ) Número de descargas: 0


Hola amigo, cargue el software que recomendaste, empezó a cargarlo perfectamente, a la mitad de la carga de System marco "Card error" y ahora que le quiero volver a cargar el sistema en uno de los puertos que habilita me marca esto:

CÓDIGO
Welcome to Octoplus/Octopus Box LG Software version 2.9.4
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM740
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.


y en el otro puerto:

CÓDIGO
Checking data...OK
Platform: LG Qualcomm
Selected port: COM740
Selected model: LS993
Reading info...
Mode: Emergency
Initializing flash...
Performed by 2.9.4 Software version.



¿Alguna idea porque?
Go to the top of the page
 
+Quote Post
guerreroL7
mensaje Jun 12 2019, 10:50 PM
Publicado: #13

Miembro del Clan
*

Grupo: Miembros
Mensajes: 27
Agradecimientos: 138
Registrado: 5-November 10
Miembro No.: 148,563



CITA(Tuxblack @ May 20 2019, 04:32 PM) *
con la z3x-lg sale sin hacer nada solo activas diag ##3424# y adb unlock new firmware no cobra créditos lo hizo en 5 segundos

Mode: Normal
Model: LS993ZVA
Build version: Dec 26 201711:36:49May 31 201723:00:00LS993ZVA
SW Version: MPSS.TH.2.0.1.c3.1-00018-M8996FAAAANAZM-1
IMEI: 35514008274702-8
BlueTooth Address: 00:00:00:00:00:00
Phone Code:
Elapsed: 1 secs. --> (v9.61)

Searching modem interface... found COM49
Reading data from phone... OK
IMEI: 355140082747XXX
Searching ADB Device... OK
Writing zTool... OK
Initialization zTool... OK
Unlocking... OK
Unlocking done
Elapsed: 7 secs. --> (v9.61)



Probado ls993 zv8 conectado en modo download y solo detecto new firmware y funcionan datos
al 100
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a guerreroL7 por su Colaboracion:
eclipce300, melgib
kinglebzul
mensaje Jun 25 2019, 10:53 AM
Publicado: #14

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 339
Agradecimientos: 706
Registrado: 11-July 11
Desde: Chilapa de Álvarez, Gerrero
Miembro No.: 230,006
Pais:mx


Pasarle el firmware LS993zva_to_H87315d_for_unlock sin miedo en la versión ZVE testeado colegas equipo queda libre.


Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM46
Modelo seleccionado: LS993
Lectura de la información...
IMEI:
Android version: 8.0.0
Battery level: 74%
Mode: Emergency
Initializing flash...OK
Plataforma: msm8996
Versión de SW: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: HD60S181012001127
IMEI:
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
Abriendo "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Escribiendo PrimaryGPT...OK
Escribiendo laf...OK
Escribiendo lafbak...OK
Escribiendo factory...OK
Escribiendo persist...OK
Escribiendo system...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo xbl...OK
Escribiendo xblbak...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo xbl2...OK
Escribiendo xbl2bak...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo boot...OK
Escribiendo recovery...OK
Escribiendo recoverybak...OK
Escribiendo tz...OK
Escribiendo tzbak...OK
Escribiendo aboot...OK
Escribiendo abootbak...OK
Escribiendo raw_resources...OK
Escribiendo raw_resourcesbak...OK
Escribiendo rpm...OK
Escribiendo rpmbak...OK
Escribiendo hyp...OK
Escribiendo hypbak...OK
Escribiendo pmic...OK
Escribiendo pmicbak...OK
Escribiendo devcfg...OK
Escribiendo devcfgbak...OK
Escribiendo modem...OK
Escribiendo sec...OK
Escribiendo keymaster...OK
Escribiendo keymasterbak...OK
Escribiendo cmnlib...OK
Escribiendo cmnlibbak...OK
Escribiendo cmnlib64...OK
Escribiendo cmnlib64bak...OK
Escribiendo apdp...OK
Escribiendo msadp...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo OP_T...OK
Finalización...OK
Writing firmware done!
Performed by 2.9.3 Software version.

Mensaje modificado por kinglebzul el Jun 25 2019, 01:37 PM


--------------------

···King Lebzul···
Go to the top of the page
 
+Quote Post
A continuacion 7 usuario(s) le Agradece(n) a kinglebzul por su Colaboracion:
alfredo27, cdma.gsm.iden, daniloreyes15, eclipce300, Gengiskan, IgAlex, zaico1234
iconker503
mensaje Jul 1 2019, 12:10 PM
Publicado: #15

Miembro del Clan
*

Grupo: Miembros
Mensajes: 19
Agradecimientos: 31
Registrado: 14-November 16
Desde: el salvador
Miembro No.: 895,105
Pais:ad


CITA(kinglebzul @ Jun 25 2019, 10:53 AM) *
Pasarle el firmware LS993zva_to_H87315d_for_unlock sin miedo en la versión ZVE testeado colegas equipo queda libre.
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM46
Modelo seleccionado: LS993
Lectura de la información...
IMEI:
Android version: 8.0.0
Battery level: 74%
Mode: Emergency
Initializing flash...OK
Plataforma: msm8996
Versión de SW: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: HD60S181012001127
IMEI:
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to your computer during the flashing!
Abriendo "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Escribiendo PrimaryGPT...OK
Escribiendo laf...OK
Escribiendo lafbak...OK
Escribiendo factory...OK
Escribiendo persist...OK
Escribiendo system...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo xbl...OK
Escribiendo xblbak...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo xbl2...OK
Escribiendo xbl2bak...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo boot...OK
Escribiendo recovery...OK
Escribiendo recoverybak...OK
Escribiendo tz...OK
Escribiendo tzbak...OK
Escribiendo aboot...OK
Escribiendo abootbak...OK
Escribiendo raw_resources...OK
Escribiendo raw_resourcesbak...OK
Escribiendo rpm...OK
Escribiendo rpmbak...OK
Escribiendo hyp...OK
Escribiendo hypbak...OK
Escribiendo pmic...OK
Escribiendo pmicbak...OK
Escribiendo devcfg...OK
Escribiendo devcfgbak...OK
Escribiendo modem...OK
Escribiendo sec...OK
Escribiendo keymaster...OK
Escribiendo keymasterbak...OK
Escribiendo cmnlib...OK
Escribiendo cmnlibbak...OK
Escribiendo cmnlib64...OK
Escribiendo cmnlib64bak...OK
Escribiendo apdp...OK
Escribiendo msadp...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo PrimaryGPT...OK
Escribiendo BackupGPT...OK
Escribiendo OP_T...OK
Finalización...OK
Writing firmware done!
Performed by 2.9.3 Software version.


funcionara para la version zvd ???
Go to the top of the page
 
+Quote Post
A continuacion 2 usuario(s) le Agradece(n) a iconker503 por su Colaboracion:
eclipce300, melvin83
leofly
mensaje Jul 8 2019, 10:09 AM
Publicado: #16

Miembro del Clan
*

Grupo: Miembros
Mensajes: 21
Agradecimientos: 36
Registrado: 4-August 12
Desde: san luis potosi, mex
Miembro No.: 370,575



lg ls 993 tenia seguridad de diciembre del 2018.
procedia flashearlo como lo dice un compañero del soporte de octopus, se bajo la version del firmware y salio todo bien y se procede a liberar, fue la experiencia que tuve con este modelo.
lo comento porque habia riesgo de brickeo,peno todo bien quedo liberado y tambien datos funcionando
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a leofly por su Colaboracion:
eclipce300
roark
mensaje Jul 9 2019, 09:45 PM
Publicado: #17

Colaborador del Clan
**

Grupo: Miembros
Mensajes: 329
Agradecimientos: 671
Registrado: 8-December 14
Desde: chiapas
Miembro No.: 666,275



CITA(norman22 @ Apr 16 2019, 03:47 AM) *
100% en version ZVF delen sin miedo.

-----------
Platform: LG Qualcomm
Selected port: COM141
Selected model: LS993
Reading info...
IMEI: 355140-08-369961-6
Android version: 8.0.0
Battery level: 56%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVF_00
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914004154
IMEI: 355140-08-36996X-X
Target operator: SPR
Hardware: rev_10
Performed by 2.9.3 Software version.
--------------------------------------------------------------------------------
Finalizing...OK
Writing firmware done!
Performed by 2.9.3 Software version.

Fichero Adjunto  post_589... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 53.85k ) Número de descargas: 0


le diste solo unlock o la flasheaste otro firmware???
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a roark por su Colaboracion:
carhtorres
ADAHCorp
mensaje Jul 27 2019, 01:39 PM
Publicado: #18

Miembro del Clan
*

Grupo: Miembros
Mensajes: 10
Agradecimientos: 43
Registrado: 22-October 15
Miembro No.: 764,539
Pais:mx


Welcome to Octoplus/Octopus Box LG Software version 2.9.5
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM1
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging"
option
6. Connect the cable and check, whether ADB interface has
appeared in PC Device Manager.
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVE-SPR-US-DEC-13-
2018-ARB00+08
Short firmware version: VZVE
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Thu Dec 13 17:39:20 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Unlock operation is currently not supported for your phone's
firmware.
Sending exploit...OK
Executing exploit...OK
Unlocking...
Phone successfully unlocked!
Rebooting phone...
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVE-SPR-US-DEC-13-
2018-ARB00+08
Short firmware version: VZVE
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Thu Dec 13 17:39:20 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
Cannot call Start on a running or suspended thread
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM4
Selected model: LS993
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: LG-LS993
Phone firmware version: LGLS993AT-00-VZVE-SPR-US-DEC-13-
2018-ARB00+08
Short firmware version: VZVE
Kernel version: 3.18.71-perf+ (lgmobile@LGEACI8R9) (gcc
version 4.9.x 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT
Thu Dec 13 17:39:20 KST 201
Android version: 8.0.0
Hardware: Qualcomm Technologies, Inc MSM8996pro 0
Please, type ##3424# to get SPC / MSL / Service Code...Failed!
Performed by 2.9.5 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM10
Selected model: LS993
Reading info...
IMEI: 355140-08-369203-3
Android version: 8.0.0
Battery level: 63%
Mode: Emergency
Initializing flash...OK
Platform: msm8996
SW version: LS993ZVE_08
Android version: 8.0.0
LAF Version: 1.1
Product ID: YE03S180914000408
IMEI: 355140-08-369203-3
Target operator: SPR
Hardware: rev_10
Writing phone firmware without real necessity is at your own risk.

Downgrade may lead to phone damage!

Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones,
modems, etc.) and close all other running programs.
To avoid errors in the flashing process, use a clean PC (without
any installed drivers for other Qualcomm-based devices).
You should not run any other programs or attach new devices to
your computer during the flashing!
Opening "LS993zva_to_H87315d_for_unlock.oct"...OK
Selecting firmware partitions...OK
Selected default partitions!
Setting options...OK
Do you want to format User Data?
Reading partitions...OK
Formating USERDATA...OK
Formating ENCRYPT...OK
Sending signature...OK
Writing PrimaryGPT...OK
Writing laf...OK
Writing lafbak...OK
Writing factory...OK
Writing persist...OK
Writing system...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl...OK
Writing xblbak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing xbl2...OK
Writing xbl2bak...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing boot...OK
Writing recovery...OK
Writing recoverybak...OK
Writing tz...OK
Writing tzbak...OK
Writing aboot...OK
Writing abootbak...OK
Writing raw_resources...OK
Writing raw_resourcesbak...OK
Writing rpm...OK
Writing rpmbak...OK
Writing hyp...OK
Writing hypbak...OK
Writing pmic...OK
Writing pmicbak...OK
Writing devcfg...OK
Writing devcfgbak...OK
Writing modem...OK
Writing sec...OK
Writing keymaster...OK
Writing keymasterbak...OK
Writing cmnlib...OK
Writing cmnlibbak...OK
Writing cmnlib64...OK
Writing cmnlib64bak...OK
Writing apdp...OK
Writing msadp...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing PrimaryGPT...OK
Writing BackupGPT...OK
Writing OP_T...OK
Finalizing...OK
Writing firmware done!
Performed by 2.9.5 Software version.

Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a ADAHCorp por su Colaboracion:
eclipce300
KronuZ
mensaje Aug 10 2019, 10:13 AM
Publicado: #19

Miembro del Clan
*

Grupo: Miembros
Mensajes: 280
Agradecimientos: 280
Registrado: 6-October 15
Desde: San Juan de los Yeras
Miembro No.: 759,765
Pais:cu


Funciona perfecto para LS993ZVC con firmware: H87320c_00_OPEN_CA_OP_0424
Go to the top of the page
 
+Quote Post
A continuacion 1 usuario(s) le Agradece(n) a KronuZ por su Colaboracion:
eclipce300
gamer3416
mensaje Sep 14 2019, 02:10 PM
Publicado: #20

Miembro del Clan
*

Grupo: Miembros
Mensajes: 15
Agradecimientos: 5
Registrado: 6-October 14
Miembro No.: 646,012



CITA(KronuZ @ Aug 10 2019, 10:13 AM) *
Funciona perfecto para LS993ZVC con firmware: H87320c_00_OPEN_CA_OP_0424

de donde bajaste ese firmware ?
Go to the top of the page
 
+Quote Post

2 Páginas: V   1 2 >
Reply to this topicStart new topic
2 usuario(s) está(n) leyendo este tema (2 invitado(s) y 0 usuario(s) anónimo(s))
0 usuarios(s) registrado(s):

 



Ver Visitas Fecha y Hora actual: 28th March 2024 - 06:09 AM
►Reglamento      ►Política de Privacidad
Este sitio web usa cookies, puedes ver la política de cookies, aquí -
Política de cookies +