Xiaomi Redmi 9c Bypass Mi Account Y Frp Con Spflash Opciones

[peru_cracker]

Elige "Memory Test" en SPFLASH Tool

MIcloud:
Offset: 0x47000000
Length: 0x3000000

FRP:
Offset: 0x3bd88000
Length: 0x100000

Suerte..!

[arleanjose]

Saludos, amigo, esta info ya la haz testeado tu? como al final colocas Suerte!

[Dr. Octopus]

Saludos, amigo, esta info ya la haz testeado tu? como al final colocas Suerte!

Si lo hizo el colega

[bilney1801]

Frp y remove cuenta mi redmi 9c semipermanente umt box
1- remover blindaje y desconectar
2- abrir Ultimate multi tool, pestaña mtk 4.4
3- conectar batería y presionar vol +y - y conectar cable USB
4- ojo no actualizar

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM27
Port Name: MediaTek USB Port (COM27)
Path: \\?\usb#vid_0e8d&pid_0003#5&3746211c&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k65v1_64_bsp_211127_105246.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM27)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

Mensaje modificado por LAB_SANTACRUZ el Dec 5 2021, 09:14 PM

Motivo de edición: Esta estrictamente escribir en mayúsculas, lea las reglas del foro y evite ser sancionado.

[lma2212]

Frp y remove cuenta mi redmi 9c semipermanente umt box
1- remover blindaje y desconectar
2- abrir Ultimate multi tool, pestaña mtk 4.4
3- conectar batería y presionar vol +y - y conectar cable USB
4- ojo no actualizar

Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM27
Port Name: MediaTek USB Port (COM27)
Path: \\?\usb#vid_0e8d&pid_0003#5&3746211c&0&4#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: True
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_k65v1_64_bsp_211127_105246.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM27)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]

yo remcomiendo la herramienta mi bypass tool primero le abro el bootloader con chimera se conecta apagado con los botones de volumen arriba y abajo precionados entra en modo brom para abrir el bootloader y para aser el bypass es en fatboot solo cobran 3 dolar y algo y te queda con software original y ultima actualizacion

[eaalvarez13]

Con UMT sale sin problemas.

Brand : Xiaomi
Model : Redmi 9C
Operation : Reset Mi Account
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3 [MediaTek USB Port_V1632 (COM3)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&3b0d2cff&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765] [Helio P35/G35]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: True] [DA Auth: True]
MEID: DA871923E79C4EE05B9C4A1DEA625E76
Preparing device...
-- Success!
Preloader saved as : preloader_k65v1_64_bsp_221016_155309.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM3)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Resetting Mi Account...
- Reset Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.1]

[Oviunlock77]

Que tal colegas, Global Unlocker lo saca rápido, solo cuesta 4 créditos, apagan el cel y conectan con botones de volumen + y - presionados, aquí el log:
Remove Mi Account
- Check Environment : USB Driver [01/22/2016,3.2]
- Platform : Windows 10 (Version 10.0, Build 22000, 64-bit Edition)
# Power Off Then Connect
# Some Devices Need To Press Volume Down
- Wait For MTK Device : MediaTek USB Port (COM6)
- Connecting : OK
- Chip Info : 0766:8A00:CA00:0000[MT6765]
- Chip Name : (HELIO P35-CERVINO)
- Connect Brom : OK
- Disable BROM Sec : OK
- BROM SEC : [SBC] [SLA] [DAA]
- EMI Info : MTK_BLOADER_INFO_V35
- Connect DA : OK
- MEID : CBB9EFC22A95B1BA4517E57BB93F6A50
- Storage Size : 58.27GB
- Read Info :
- Manufacturer :XIAOMI
- Device Name :REDMI 9C NFC
- Model :M2006C3MNG
- System Name :ANGELICAN_EEA
- Incremental :V12.5.3.0.RCSEUOR
- Android Version :11OK
- Check Model Info : OK
- This Operation Will Take 4 Credits
- Connect To Server : OK
- Read Account Info : OK
- Disable DM-Virty : OK
- Remove MI Account : OK
- Reboot : OK
# Elapsed Time [00:09]

Mensaje modificado por Oviunlock77 el Apr 27 2023, 11:27 PM

[hardwarematik]

UMT sin problemas

Fichero(s) Adjunto(s)

 Redmi_9C... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 236.8k ) Número de descargas: 0