Versión para Imprimir

Pulsa aquí para ver este tema en su formato original

Clan GSM - Unión de los Expertos en Telefonía Celular _ ChimeraTool - Soporte Oficial en Español _ M105m Repair Y Patch Binario 7

Publicado por: faustol el Jan 14 2022, 04:27 PM

aca les dejo el log de operaciones de chimera, el root con eftsu

Chimera Mobile Phone Utility version: 30.88.1240 @ 2022-01-14
Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-M105M
Carrier ID: ARO
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Fri Mar 19 04:33:09 KST 2021
PDA Version: M105MUBS7CUC1 [march 2021, rev1]
Phone Version: M105MUBS7CUC1 [march 2021, rev1]
CSC Version: M105MOWO7CUC1 [march 2021, rev1]
Board Platform: UNIVERSAL7870
Modem Platform: SHANNON315
Serial Number: R28M42E16ZA
Imei: 356944100207843
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v00
Security Patch: 2021-03-01
Em Did: 04D4F75BE4B4
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Current imei: xxxxxxxxxxxxx43
Repaired imei: xxxxxxxxxxxxx33
Successfully finished.



Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-M105M
Carrier ID: ARO
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Fri Mar 19 04:33:09 KST 2021
PDA Version: M105MUBS7CUC1 [march 2021, rev1]
Phone Version: M105MUBS7CUC1 [march 2021, rev1]
CSC Version: M105MOWO7CUC1 [march 2021, rev1]
Board Platform: UNIVERSAL7870
Modem Platform: SHANNON315
Serial Number: R28M42E16ZA
Imei: 356944100207033
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v00
Security Patch: 2021-03-01
Em Did: 04D4F75BE4B4
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.



Publicado por: Mari Cervantes el Jan 14 2022, 09:54 PM

Leyendo el log veo la version que uso
Dejo los mismos archivos root y firmware aqui

 M105M_U7... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 8.22mb ) : 10
 

Publicado por: maurofalcon el May 11 2022, 02:00 PM

Estoy intentando con Z3X pero me da el siguiente error.

Operation: Repair Jul 2021
Selected model: SM-M105M
Software version: 44.4

Waiting ADB device... OK
Reading phone info...
Model: SM-M105M
Android version: 10
PDA version: M105MUBS7CUC1
CSC version: M105MOWO7CUC1
Phone version: M105MUBS7CUC1
Product code: SM-M105MZBAARO
CSC country code: Argentina
CSC sales code: ARO
Carrier ID: ARO
Phone SN: R28M429VSZK
IMEI: 356944100187250
HW version: REV0.4
RF cal date: 20190424
Chip name: EXYNOS7870
Modem board: SHANNON315
Security patch: 2021-03-01
SIM State: ABSENT
Checking Super user right... true
Root version: 3.19:EFTSU
Checking data... OK
Searching server... OK
Checking server answer... modem required
There is no information about this firmware on the server.
Done with Samsung Tool PRO v.44.4 [SM-M105M,Repair Jul 2021]

Habra algun archivo para flashear y que me lo haga la Z3X? En este momento no tengo Chimera.

Publicado por: clinicacell33 el Feb 17 2023, 08:44 AM

hola alguien probo con binario 8?

Publicado por: alexis01 el May 18 2023, 10:40 AM

CITA(clinicacell33 @ Feb 17 2023, 08:44 AM) *
hola alguien probo con binario 8?


yo tengo uno binario 10 y tampoco creo que vaya estar soportado...

Publicado por: davidloacabrera el Aug 27 2023, 11:58 AM

CITA(alexis01 @ May 18 2023, 10:40 AM) *
yo tengo uno binario 10 y tampoco creo que vaya estar soportado...



acabo de hacer uno en binario 10 doc y quedo full con z3x

Potenciado por Invision Power Board
© Invision Power Services