Actualizaciones De La Riff Box Solo Aqui Opciones

[SpLock]

RIFF JTAG - Latest news and Updates !

RIFF Box – JTAG Revolution

RIFF JTAG – Samsung S7330 Unbrick, Boot repair supported « RIFF Box – JTAG Revolution

RIFF JTAG – CDMA Samsung B209 Breeze Supported « RIFF Box – JTAG Revolution

RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution

RIFF JTAG – Samsung i997 infuse 4g Unbrick, Boot repair supported « RIFF Box – JTAG Revolution

RIFF JTAG -CDMA Samsung F619 supported « RIFF Box – JTAG Revolution

RIFF JTAG – JTAG Manager v1.36, RIFF Box firmware v1.27, GDB Server v1.05 released « RIFF Box – JTAG Revolution

Bug fixes :

Samsung_M110S.dll
-------------------------------------
- pinout picture was corrected
Samsung_I9100.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
HTC_DesireHD.dll, HTC_DesireS.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
- Resurrection interface was changed to a more flexible one
Samsung_I917.dll
-------------------------------------
- added resurrection data for phone revisions with 2KB-paged NAND chips

RIFF Box – JTAG Revolution

[Anunciante Autorizado]

[UnlockSucessfull]

RIFF JTAG - Samsung updates !

07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)


Added support for Samsung Galaxy II, OMAP4430 version supported


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

[Jhonny]

RIFF JTAG - Samsung updates !

07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)
Added support for Samsung Galaxy II, OMAP4430 version supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Traducción:

RIFF JTAG - actualizaciones de Samsung 10/07/2011

Samsung Galaxy II, OMAP4430 versión compatible

(Samsung i9100G, Samsung i9108)

Añadido soporte para Samsung Galaxy II, OMAP4430 versión soportada por favor haga clic en "Buscar actualizaciones"

botón de Administrador de RIFF JTAG para descargar e instalar nuevos archivos.

[miguelpaolo]

RIFF JTAG - HTC updates !
12.10.2011 HTC Desire Z (HTC Vision) Update

Whats new :

Added support for HTC Desire Z (HTC Vision)


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution

[Eliminado_samaniego23_*]

RIFF JTAG - Samsung updates !

19.10.2011 RIFF JTAG – Samsung Z500 supported !

Whats new :

Added support for: Samsung Z500

Resurrection of Samsung Z500 requires battery or external power supply (we didn’t test whether phone is powered on using only a USB cable). You can use RIFF BOX’s 4.2V output for power (requires 1.16 firmware version or later and the 4.2V Output feature enabled in the JTAG Manager).

To resurrect Samsung Z500:

Solder JTAG cable to Samsung Z500 JTAG pads;
Insert battery (or connect external power supply to the battery pads);
Make sure Samsung Z500 is selected in the list of models;
Click Resurrect button;
Press Power-On key shortly;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;
Insert battery;
Hold ‘9’ key and press ‘Power ON’ button. In few seconds you should see light-blue



Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Fichero(s) Adjunto(s)

 z500_med... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 42.86k ) Número de descargas: 0

 

[SpLock]

RIFF JTAG - HTC & Samsung updates !

24.10.2011 HTC & Samsung updates !

Whats new :

Added support for: HTC Supersonic (EVO 4G) http://www.jtagbox.com/jtag-news/riff-jtag...pair-supported/

Added support for: Samsung i520 http://www.jtagbox.com/jtag-news/riff-jtag...arts-supported/

Added support for: Samsung Corby II – S3850 http://www.jtagbox.com/jtag-news/riff-jtag...3850-supported/


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.


RIFF Box – JTAG Revolution http://www.jtagbox.com/

[SpLock]

RIFF JTAG - LG & HTC updates !
24.10.2011 RIFF JTAG - LG & HTC updates !


Whats new :

Added support for: LG SH860 http://www.jtagbox.com/jtag-news/riff-jtag...h860-supported/

Added support for: HTC Desire CDMA http://www.jtagbox.com/jtag-news/riff-jtag...cdma-supported/


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF Box – JTAG Revolution http://www.jtagbox.com/

[wasson6000]

RIFF JTAG – Samsung Galaxy S Plus Unbrick, boot repair supported

by admin on Oct.26, 2011, under News

26.10.2011 Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported
Resurrecting Samsung I9001 is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Please note, MSM8255T is dual core chipset – it has ARM11 and Qualcomm Scorpion cores. During power on sequence only ARM11 core is visible on the JTAG chain. If boots are not completely damaged and it comes up to initializing of the Scorpion core then Scorpion core appears on the JTAG chain too. This will shift ARM11 from TAP0 into TAP1 position on the chain, while current resurrector has the ARM11 core hardcoded at TAP0 position. Thus make sure to establish JTAG connection in the time range while Scorpion core is not visible yet.


To resurrect Samsung I9001:
Solder JTAG cable to Samsung I9001 JTAG pads;
Make sure Samsung I9001 is selected in the list of models;
Insert battery and connect USB Data cable;
If you use only battery, press Power On key;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold ‘Volume Down’ key and press ‘Power ON’ button.

Mensaje modificado por wasson6000 el Oct 26 2011, 02:41 PM

Fichero(s) Adjunto(s)

 Samsung_... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 25.09k ) Número de descargas: 0

 

[wasson6000]

RIFF JTAG - Samsung i9003, Samsung m820 supported
28.10.2011 - RIFF JTAG Updates

Whats new :

Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair
Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair
ZTE RD518 Boot repair

[FRANCISCO_MARCEL...]

traduccion google

RIFF JTAG - Samsung Galaxy S Plus unbrick, inicio de reparación de apoyo

by admin on Oct.26, 2011, under Noticias

26/10/2011 Samsung Galaxy S Plus (i9001) unbrick, la reparación de arranque apoyo
Samsung I9001 resucitar es fácil. Teléfono está encendido automático con cable de datos USB conectado al PC, mientras que la batería está conectada.
Tenga en cuenta, es MSM8255T chipset de doble núcleo - se ha ARM11 y núcleos de Qualcomm Scorpion. Durante la secuencia de encendido solo núcleo ARM11 es visible en la cadena JTAG. Si las botas no están completamente dañados y lo que se refiere a la inicialización del núcleo central Escorpión Escorpión luego aparece en la cadena JTAG también. Esto cambiará ARM11 de TAP0 en TAP1 posición en la cadena, mientras que Resucitador actual tiene el núcleo ARM11 codificada en TAP0 posición. Por lo tanto, asegúrese de establecer la conexión JTAG en el intervalo de tiempo mientras que el Core Escorpión no es visible todavía.


Samsung I9001 para resucitar:
Soldadura de cable JTAG para Samsung I9001 almohadillas JTAG;
Asegúrese de que Samsung I9001 es seleccionado en la lista de los modelos;
Inserte la batería y conectar Cable de datos USB;
Si sólo utiliza la batería, presione tecla Encendido;
Haga clic en el botón Resurrección;
Espere hasta que las señales de un software finalización de la operación con éxito;
Desconecte la fuente de alimentación, cables de soldadura-JTAG;
Ahora el teléfono está en condiciones de arranque, es decir, incluso si no se inicia normalmente puede flash utilizando los métodos conocidos de parpadear.
Para entrar en modo de descarga:
Desconecte el cable de PC;
Inserte la batería;
Hold 'Bajar volumen "clave y" Power ON "presione el botón.

[josue85]

RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc)

by admin on Nov.11, 2011, under News

11.11.2011 Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15, e10,u20 etc)

Resurrecting SonyEricsson phones is easy. Phone is auto powered on with USB Data Cable connected to the PC while battery is inserted.

(la resurreccion del soni ericsson es facil. El telefono es auto encedido con el cable usb coectado al pc mientras la bateria esta insertada)

With current resurrector you can choose Unlock or Resurrection operation to perform. During resurrection, you can select which areas to be repaired. Please note, in some cases phone reports failure during firmware update: in this case you may need to select option to erase Modem SW zone during resurrection.

(con el resurrectos correcto tu puedes escoger que operacion hacer desbloqueo o resurreccion.Durante la resurreccion, puedes escoger que area sea reparada. Porfavor note, en algunos casos el telefono reporto fallas durante la actualizacion de firmware: en este caso necesita seleccionar el borrado de la Zona Modem SW durante la resurreccion)



During Unlock operation full backup of relevant zones is made, thus you have no risk killing your phone permanently – you have always an option to restore your phone to its original condition with the backup file. Backup files are created in JTAG Manager root directory, in the folder ‘BackupFiles’.

(Durante el proceso de desbloqueo un respaldo completo es hecho de las zonas mas relevante, no tiene ningun riesgo de matar su telefono permanentemente, siempre tiene la opcion de restaurar su telefono a la condicion origuinal con los archivos de respaldo. El respaldo es creado en el directorio de Jtag Manager en el folder "Backupfiles")



Riff siempre a la mano con sus actualizaciones

Mensaje modificado por josue85 el Nov 11 2011, 11:01 AM

[M&S]

11/19/2011 - QUALCOMM MDM6600 DLL NAND genérico lanzado
es nuevo:
QUALCOMM MDM6600 NAND DLL
Lo uso para los teléfonos que han MDM6600 en banda - por ejemplo, LG P999, el iPhone 4s, y muchos otros teléfonos que utilizan TEGRA2 AP CPU.

QUALCOMM MSM7227 OneNAND DLL (2kb página)
QUALCOMM MSM7227 OneNAND DLL (4kb página)
QUALCOMM QSC6xxx OneNAND DLL
Todos los demás genéricos QUALCOMM DLL-s están ahora bajo la misma rama, por lo que aquí está la lista completo de la revisión:

ESM7xxx L41 D04 NAND
MDM6600 NAND
MSM6xxx L06 D02 NAND
MSM7227 L41 D08 OneNAND
MSM7227 L41 D08 OneNAND 4k
MSM7xxx L41 D04 NAND
MSM7xxx L41 D08 NAND
QSC1100 x14 NI
QSC60xx L18 D08 NI
QSC6xx L20 D08 NI
QSC60xx L24 D08 NI
QSC6xxx L32 D08 NAND
QSC6xxx L36 D08 NAND
QSC6xxx L36 D08 OneNAND
QSD8xxx L41 D04 NAND
Pulse el botón "Buscar actualizaciones" botón para descargar e instalar los nuevos archivos.


RIFF Box - JTAG Revolución
http://www.jtagbox.com/

Mensaje modificado por M&S el Nov 19 2011, 06:50 AM

[miguelpaolo]

RIFF JTAG - CDMA updates !

21.11.2011 CDMA Updates released

Whats new:

• Added repair support for ZTE F280
• Added repair support for Micromax C100
• Added repair support for Intex In50
• Added repair support for Huawei ETS2225
• Added repair support for Huawei ETS 2222
• Added repair support for Huawei ETS2205

Please click “Check for Updates” button in Box Service TAB in order to download and install new files.

RIFF Box – JTAG Revolution

[jhon357add]

RIFF JTAG – Unbrick Samsung Galaxy TAB Wi-Fi (P1010), more CDMA Models supported
by admin on Nov.22, 2011, under News
22.11.2011 Unbrick Samsung Galaxy TAB Wi-Fi (P1010), more CDMA Models supported
Samsung P1010 is based on the OMAP3630 (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
Please note, in most cases you will be required to insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot before starting resurrection. In case you don’t have such card yet, you can create it on the “Samsung P1010 RIFF™ MagicCard” page of the resurrector settings dialog.
This is IRAM version of the Samsung P1010 resurrector. We recommend you using it only in case you had problems connecting to phone with normal Samsung P1010 resurrector DLL.
To resurrect Samsung P1010:
Solder JTAG cable to Samsung P1010 JTAG pads;
Insert Samsung P1010 RIFF™ MagicCard into phone’s SD slot;
Connect USB cable to phone and PC;
Insert battery;
Make sure Samsung P1010 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
There are two DLL-s (Normal and iRAM version) – You can use iRam version in case normal one doesnt work properly. iRam version is much slower, but more robust.

[jhon357add]

RIFF JTAG – Samsung Star Duos (C6712) Unbrick – Boot repair supported
by admin on Nov.29, 2011, under News
29.11.2011 Samsung Star Duos (C6712) Unbrick – Boot repair supported
Samsung C6712 resurrection is simple. Battery is not required. To power the board it’s most convenient to use an USB Data Cable.
In order to contact to JTAG pads you may need to carefully scratch off paint covering (mask layer) above them. Sometimes there is reset problem with these phones, thus you may need to disconnect and then connect USB cable again.
To resurrect Samsung C6712 do this:
Solder JTAG cable to Samsung C6712 JTAG pads;
Insert battery and connect USB cable to phone and PC;
Make sure Samsung C6712 is selected in the list of models
Click Resurrect button;
Wait few seconds until software signals a successful operation completion;
Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘SIM Swap’ keys and press Power-On.

[miguelpaolo]

16.12.2011 Direct JTAG Access to Flash Memory Plugin v1.00



Bug Fix updates :-

ZTE_AC2746.dll
-------------------------------------
- ID 0x100F80E1 is addedd to allowed list


Samsung_S239.dll
-------------------------------------
- ID 0x100FA0E1 is addedd to allowed list


ZTE_MF180S.dll
-------------------------------------
- ID 0x401200E1 is addedd to allowed list


Samsung_B379.dll
-------------------------------------
- ID 0x220B30E1 is addedd to allowed list


Samsung_M820.dll
-------------------------------------
- ID 0x503E00E1 is addedd to allowed list


Samsung_S5570.dll
-------------------------------------
- ID 0x503C10E1 is addedd to allowed list

CÓDIGO

Release info:

This plugin performs direct access to a flash memory used in the selected target. No DCC Loader is used here, thus it is completely independent of target hardware implementation (RAM memory availability, visibility, addressing and layout, core clocking, etc.). Main disadvantage is a noticeable data exchange speed decrease comparing to the DCC Loader’s data exchange speeds (approximately 10...20 times slower).

With the help of this plugin you can do:

    Read selected flash memory range;
    Write selected flash memory range;
    Erase selected flash memory range.


Currently supported memory controllers are:

    OneNAND Memory (connected directly to the MCU’s address space);
    CFI Compliant NOR Memory with CFI Command sets 0x0001, 0x0002, 0x0200 and 0x0003;
    NAND Controller in MSM6250, MSM6250A;
    NAND Controller in QSC6055, QSC6085, QSC6240, QSC6270;
    NAND Controller in MDM6085, MDM6200, MDM6600;
    NAND Controller in MSM6245, MSM6246, MSM6270, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6290, MSM6800A, MSM6801A;
    NAND Controller and OneNAND Controller in MSM7225, MSM7227, MSM7625, MSM7627;
    NAND Controller in MSM7200, MSM7200A, MSM7201A, MSM7500, MSM7500A, MSM7501A, MSM7600;
    NAND Controller in QSD8250, QSD8650;
    eMMC Controller #2 in MSM7230, MSM8255, MSM8255T;
    eMMC Controller #0 in S5PV310;


Currently supported chipsets and cores for JTAG I/O operations:

    Generic ARM Cores: ARM7, ARM9 (ARM920, ARM926, ARM946), ARM11, CORTEX-A8,CORTEX-A9;
    Qualcomm QSC Family: QSC1100, QSC1110, QSC6010, QSC6020, QSC6030, QSC6055, QSC6085, QSC6240, QSC6270;
    Qualcomm MSM Family: MSM6000, MSM6150, MSM6245, MSM6246, MSM6250, MSM6250A, MSM6260, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6800A, MSM6801A, MSM6290, MSM7225, MSM7227, MSM7625, MSM7627, MSM7230, MSM8255, MSM8255T, MSM8260;
    Qualcomm QSD Family: QSD8250, QSD8650;
    Qualcomm ESM Family: ESM7602A;
    Qualcomm MDM Family: MDM6085 MDM6200, MDM6600;
    OMAP Family: OMAP1710, OMAP3430, OMAP3630, OMAP4430;
    NVIDIA Family: TEGRA2;
    Marvell/XScale Family: PXA270, PXA271, PXA272, PXA310, PXA312, PXA320.
    Samsung Processors: S5P6422, S5PV310.


Memory reading/programming logic is almost same as is performed on the DCC Read/Write page in the JTAG Manager - Main and Spare fields, Auto FullFlash size detection, ability to flash image files (for NAND)., etc. Users familiar with the DCC Read/Write page features will not be required to learn almost anything new in order to be able to use this plugin. Thus it means data files read from memory by this plugin (partial or full flash image) can be flashed back through the DCC Read/Write page, and vice versa.
Here, it is user’s task now to know such info about target as what exact MCU is used in current device, what memory is used (NAND, OneNAND, NOR, eMMC/SD, MDOC or other), which component of target system can see this memory (for example NAND memory is usually visible to MCU’s Embedded Memory Controller, while NOR is directly accessible by the MCU itself; OneNAND memory in most cases is directly accessible by MCU but sometimes it can be visible via MCU’s Embedded Memory Controller).

Please note main differences with the DCC Read/Write methods:

    Exact chipset (MCU) name selection is required;
    Memory type selection is required (for example: NAND or NOR memory);
    Which component of target system can see this memory (for example: MCU itself or MCU’s Embedded Memory Controller): the ‘Memory Type & Host’ setting;
    Memory Controller Mode is introduced here (while on DCC Read/Write page in the JTAG Manger the Memory Controller Mode was automatically chosen depending on ROMi Address Space selected). Many Qualcomm NAND Controllers are widely configurable, for example they allow for firmware to select any desired position of bad block marker byte inside of NAND page’s main or spare area, and upon reads/writes this byte will be handled by controller itself, making it ‘invisible’ in the NAND page data. Thus reading NAND with configuration different to the one used by the manufacturer for writing data into this NAND memory (firmware for example) will result in 1 byte to be erroneously read or lost. In many cases (by many manufacturers) the default bad block marker position is configured to be at offset 0x01D1 in the page’s main area (abbreviated Memory Controller Mode you will see in the list as this: “M:0200/S:10/BM:01D1” - meaning NAND controller to be configured for main area 0x0200 bytes, spare area 0x0010 bytes, bad block marker position in main area (BM) at offset 0x01D1 (BM:01D1)); other most common case is for bad block marker to be at position 0x0006 in spare area (such abbreviated Memory Controller Mode you will see in the list as this: “M:0200/S:10/BS:0006” - meaning NAND controller to be configured for main area 0x0200 bytes, spare area 0x0010 bytes, bad block marker position in spare area (BS) at offset 0x0006 (BS:0006));

    During NAND read operations, if ECC Module Enable is checked, the ECC status is checked too. Thus make sure to disable ECC checks during reads unless you’re in need for an advanced operation.

Short Manual how to Read/Write/Erase memory:

    Select chipset (MCU) used in the current target (for example MSM6280);
    Select memory type and it’s host (MCU or MCU’s Embedded Memory Controller);
    Setup TCK/RTCK frequencies, JTAG I/O Voltage levels, target’s core position on the JTAG scan chain (TAP#);
    Connect target device to the RIFF BOX, make sure it has power, and click Connect & Flash ID button to ensure target device is connected and selected memory is initialized and visible;
    All further actions are completely same as is done when using DCC Read/Write page features.


Most common errors which can happen during direct read/write operations:

    The NRST signal is neglected by user. Please take into account that NRST signal is the most important one. Making system reset helps debugger (RIFF BOX) to establish device into 100% pre-known hardware state, which guarantees that a MCU’s memory controller selected by user will be configured as it should be and successful memory access will be established;
    Cannot connect to selected memory (Connect & Flash ID): check NRST signal; check Reset Method in settings; make sure proper MCU, memory type and controller is selected in settings; in case NOR or directly accessible OneNAND memory is selected make sure valid memory base is set;
    “Resetting and Halting Target…” fails: make sure device is powered and power on key (if present) is pressed during this stage; some devices like HTCs based on the MSM8255 chipsets are fused, and JTAG may be enabled only by started firmware - thus you may need to vary the Reset Method settings: disable reset at all (which is not desirable though) or adjust higher waiting time after system is reset by the NRST signal assertion to the moment when an attempt to HALT core is made (for fused HTCs based on MSM8255 this is 670 ms and more);

[UnlockSucessfull]

RIFF JTAG - CDMA Updates !

16.12.2011 CDMA Motorola w210 supported

Added support for :- Motorola w210


Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

UnlockSucessfull

Mensaje modificado por UnlockSucessfull el Dec 16 2011, 01:49 PM

[SpLock]

RIFF JTAG – Lenovo LePhone 3G W100 Unbrick – Boot repair supported


19.12.2011 Lenovo LePhone 3G W100 Unbrick – Boot repair supported

Resurrecting Lenovo LePhone 3GW100 is easy. To establish JTAG connection make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
To resurrect Lenovo LePhone 3GW100:
• Solder JTAG cable to Lenovo LePhone 3GW100 JTAG pads;
• Insert battery;
• Make sure Lenovo LePhone 3GW100 is selected in the list of models;
• Press and hold Power On key;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.


 lenovo_3... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 184.2k ) Número de descargas: 0

[miguelpaolo]

RIFF JTAG - CDMA updates !

23.12.2011 RIFF JTAG - CDMA updates !



Added support for: CDMA Huawei C3500 Supported

Added support for: CDMA Samsung B339 Breeze Supported

Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Bug Fix updates

Samsung_I9100GX.dll (XLoader+)
-------------------------------------
- due to so many different and incompatible revisions of i9100G boards (H, 0G etc)
we temporarily removed boot.bin partition repair.

RIFF Box – JTAG Revolution

[totrix22]

RIFF JTAG – CDMA Olive C2110 Supported
-------------------------------------------------------
by admin on Dec.27, 2011, under News

27.12.2011 CDMA Olive C2110 Supported

Resurrecting Olive C2110 is simple. Phone is auto powered on with USB Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×2254

To resurrect Olive C2110:
• Solder JTAG cable to Olive C2110 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Olive C2110 is selected in the list of models;
• Click Resurrect button;
• Choose which areas to flash;
• Wait till software signals a successful operation completion;
• De-solder JTAG wires;

http://www.jtagbox.com/jtag-news/riff-j ... supported/