Todas Las Programaciones De Sanyo Cdma Hasta El Momento Opciones

[barrios]

habro este tema ya que he visto que todavia siguen preguntando por las programaciones de algunos modelos, espero sea de ayuda , saludos.
Sanyo MM-7400
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo MM-7500

Manual Programming:

Power on the handset
*
Enter ##000000#
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete


Sanyo MM-8300


Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo PM-8200
Manual Programming:

*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete



Sanyo SCP-2300
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-2400
Manual Programming:

· Power the phone on

· Enter ##000000#

· Select edit then click OK

· Enter in MDN phone number (10 digit number), then click OK

· Enter in MIN phone number (10 digit number) then click OK

· Select Done and click OK

· Phone will power cycle and programming in now complete


Sanyo SCP-3100
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-4900
Manual Programming:
*
Power the phone on
*
Enter ##000000
*
Press the menu/ok button
*
Scroll to save number and press ok
*
Select mobile number followed by OK twice
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Press the red END button
*
Phone will power cycle and programming in now complete



Sanyo SCP-4920
Manual Programming:
* Power the phone on
* Enter ##000000#
* Select edit then click OK
* Enter in MDN phone number (10 digit number), then click OK
* Enter in MIN phone number (10 digit number) then click OK
* Select Done and click OK
* Phone will power cycle and programming in now complete



Sanyo SCP-4930
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-5500 / VM-4500
Manual Programming:

*
Power on the handset
*
Enter ##000000
*
Then press the Menu/Ok key
*
Select edit
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MSID phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo SCP-6600 / SCP-6550
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-6650
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-8100
Manual Programming:
*
Power the phone on
*
Enter ##000000
*
Press the menu/ok button
*
Then click down once

Then press OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-8400
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo SCP-7000
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete


Sanyo SCP-7300
Manual Programming:
*
Power on the handset
*
Enter ##000000 then hit the Ok/Menu button
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete



Sanyo Katana DLX
Manual Programming:
*
Power on the handset
*
Plug in the USB cable
*
Open the handset and select the 3rd option(Modem)
*
Enter ##000000#
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete


Sanyo SCP-3200
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete


Sanyo SCP-200
*
Manual Programming
o Power the phone on
o Enter ##000000#
o Select edit then click OK
o Enter in MDN phone number (10 digit number), then click OK
o Enter in MIN phone number (10 digit number) then click OK
o Select Done and click OK
o Phone will power cycle and programming in now complete




Sanyo SCP-5300


* Manual Programming
o Power the phone on
o Enter ##000000#
o Select edit then click OK
o Enter in MDN phone number (10 digit number), then click OK
o Enter in MIN phone number (10 digit number) then click OK
o Select Done and click OK
o Phone will power cycle and programming in now complete



Sanyo M1
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo S1
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo MM-5600
* Manual Programming
o Power the phone on
o Enter ##000000#
o Select edit then click OK
o Enter in MDN phone number (10 digit number), then click OK
o Enter in MIN phone number (10 digit number) then click OK
o Select Done and click OK
o Phone will power cycle and programming in now complete




Sanyo SCP-6650 Katana II Qwest
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-7050
Manual Programming:

*
Power on the handset
*
Enter ##000000#
*
SVC menu appears
*
Click on the Edit option
*
Enter the MDN option and press ok
*
Enter the MSID
*
Scroll to done on the handset
*
The phone will reboot and is now complete



Sanyo SCP-3800
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo SCP-7200
* Manual Programming

1. Enter ## followed by "000000"
2. Press MENU, SAVE PHONE #
3. Press Ok
4. SVC Programming will be displayed. Scroll and highlight Mobile Number. Press OK
5. Press OK again
6. ESN will be displayed. Press OK
7. Mobile Number will be displayed enter the 10 digit MIN press OK
8. Press OK 4 times
9. Phone will power cycle
10. Programming is complete




Sanyo MM-9000
Manual Programming:
*
Power the phone on
*
Enter ##000000
*
Press the menu/ok button
*
Then click down once
*
Then press OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK

Phone will power cycle and programming in now complete


Sanyo SCP-700(Pro700)
*
Manual Programming
o Power the phone on
o Enter ##000000#
o Select edit then click OK
o Enter in MDN phone number (10 digit number), then click OK
o Enter in MIN phone number (10 digit number) then click OK
o Select Done and click OK
o Phone will power cycle and programming in now complete




Sanyo SCP-6750 (Katana Eclipse)
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-PRO 200
*
Manual Programming
o Power the phone on
o Enter ##000000#
o Select edit then click OK
o Enter in MDN phone number (10 digit number), then click OK
o Enter in MIN phone number (10 digit number) then click OK
o Select Done and click OK
o Phone will power cycle and programming in now complete



Sanyo SCP-2700
Manual Programming:
*
Power the phone on
*
Enter ##000000#
*
Select edit then click OK
*
Enter in MDN phone number (10 digit number), then click OK
*
Enter in MIN phone number (10 digit number) then click OK
*
Select Done and click OK
*
Phone will power cycle and programming in now complete


Sanyo SCP-3810
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete


Sanyo SCP-6760
Manual Programming:
*
Power on the handset
*
Enter ##000000#
*
Service programming screen appears
*
Highlight edit then click OK
*
Enter in MDN phone number (10 digit number), then click ok
*
Enter in the MIN phone number (10 digit number), then click ok
*
Click Done
*
Phone will power cycle and programming is complete

[Anunciante Autorizado]

[fernandof]

LA PROGRAMACION PARA EL SANYO PM-8200 NO FUNCIONO. ALGUNA OTRA MANERA??[size="4"][/size]

[barrios]

[quote name='fernandof' date='Jan 10 2011, 12:38 PM' post='733856']
LA PROGRAMACION PARA EL SANYO PM-8200 NO FUNCIONO. ALGUNA OTRA MANERA??[size="4"][/size]
checa otrvez la programacion , aqui su traduccion al español
Sanyo PM-8200
Manual de programación:

*
prenda el teléfono
*
Introduzca # # 000000 # (cambiar los seis ceros por tu codigo spc)
*
Seleccione edición acontinuación, haga clic en Aceptar
*
Entrar en MDN número de teléfono (10 dígitos), a continuación, haga clic en Aceptar
*
Introduce el número de teléfono Min (10 dígitos) y luego haga clic en Aceptar
*
Seleccione Hecho y haga clic en Aceptar
*
telefono se reinicia, programacion completa.

[alangersain]

LA PROGRAMACION PARA EL SANYO PM-8200 NO FUNCIONO. ALGUNA OTRA MANERA??[size="4"][/size]

La Programacion de ese modelo es esta man ##3282# salu'2

Mensaje modificado por alangersain el Feb 9 2011, 08:07 PM

[univercel2000]

amigos la programacion del spc 6550 no entra tendran alguna otra, tengo el katana II spc 6550 y ya intente varias y nada de ya gracias

[univercel2000]

tendras la programacion de spc 8100 la que pusiste no entra, o como le saco el spc de ya gracias

Mensaje modificado por univercel2000 el Jul 1 2011, 03:41 PM

[barrios]

tendras la programacion de spc 8100 la que pusiste no entra, o como le saco el spc de ya gracias

la programacion es correcta intenta denuevo, y para sacar el codigo spc utilizael programa llamado smith para sanyo, espero te sirva esta informacion, saludos.

[oscarune]

La Programacion de ese modelo es esta man ##3282# salu'2

te la bañaste papa...esa es la buena....mil gracias!!!

[Carlos25mx]

La Programacion de ese modelo es esta man ##3282# salu'2

Y como saco el SPC de este modelo amigo, de antemano mil gracias... No cuento con el cable USB para el SCP-6650